SLICE Exothermic Cutting System - the Easy Way to Remove Frozen Pins 

True!

Dont think there is anything exept for maybe a gold silver or Iridium plate armor that could protect you from that thing...

I think the SLICE system uses power to strike the arc or something. When we did exothermic cuts at school the system was hooked up to a car battery.

I would use a grinder, and or cutters.

Although you possibly could

If they didn't need an amputation _before_ using the exothermic lance mere inches from their flesh they *certainly do afterwards.* The flame is in excess of 6,000F, molten slag and sparks are going everywhere and the arc spews UV rays. Not to mention you're melting and burning whatever is going through the person and metal conducts heat _really efficiently._

@@the_inquisitive_inquisitor Well, he could shield the person with something from the sparks, Uv rays are your least problem here.

@@yaykruser I'm not sure you could provide adequate protection from liquid metal coming out of the cut. In most cases it would be far preferable to use a mechanical process like an angle grinder as opposed to a thermal process, *especially* exothermic slice.

Não é pra ser preciso. É só pra remover pinos congelados. Com o buraco no meio ele resfria e encolhe. Isso é usado pra cortar metal grosso.

I think we ran like 60psi when we used it at school, but its been a while.

80 psi

3000 psi (O2) / 207 Bar

@@ITS-ME-EVERLY this makes no sense

@@vr112 Think they were referring to the tank itself, not what's going through the line.

You hiring? I'm about to graduate.

yes or you can bend it

Carbon arc cutting