No video :(

Small Tape, Big Difference | Keychron Q1 Mods (Gateron Phantom Reds, GMK Olivia)

Подписаться 459 тыс.

Просмотров 377 тыс.

50% 1

0:00 Intro
0:11 Ting Ting
1:32 Typing sounds comparison 1
2:15 Thinsulate dampener
2:45 Typing sounds comparison 2
3:10 Stabilizers
6:59 Tape mod
7:34 Typing sounds comparison 3
8:03 GMK Olivia
8:30 Typing sounds comparison 4
10:06 SA Spacebar
Keychron Q1 www.keychron.com/products/key...
Q1 Unboxing Video • Keychron Q1 Unboxing &...
How To Korean Stab Mod (Dr Huru) • [How to] Galaxy Brain ...
AR87 Masking Tape Mod (for case) • ABKONCORE AR87 Mods | ...
Electric Screwdriver www.monstargears.com/98/?idx=416
Silicone Tape (KOR) txkeyboard.com/shop_view/?idx...
Masking Tape amzn.to/3yZJuFo
Permatex Dielectric Grease amzn.to/2UJ037v
Tribosys 3204 swagkeys.com/products/tribosy...
🐱 Neko Atsume Figure amzn.to/3geTJ1B
📷 Sony a7C Camera amzn.to/32mX4V9
📷 Sony SEL35F18F 35mm F1.8 Lens amzn.to/32l5X1q
🎤 Rode VideoMicro amzn.to/34vCDFw
🎙 Shure MV7 amzn.to/2PTrSKa
🎵 Music
Rico - Jobii
Epidemic Sound epidemicsound.com/referral/mm... (Referral link)
🛍 Sponsors & Partners
Banggood ban.ggood.vip/VP4w
Amazon amzn.to/2TxOmQ0
Monstargear www.monstargears.com
Daily Clack dailyclack.com?aff=4
KBDfans kbdfans.com/r?id=soudav
Disclosure: Amazon, Banggood, Daily Clack, KBDfans links provided are linked to my affiliate accounts & support the channel.
✉️ Business inquiries: 3ildcat@naver.com (No commission build)
🐈 :3ildcats Memberships / @3ildcat

Опубликовано:

12 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 412

@toufusoup 2 года назад

2021: the year of tape taking over pretty much everyone’s priorities in modding a keyboard. I love it. From PCBs, cases, and even stabilizers.

@3ildcat 2 года назад

Tapeyboards

@dickangelsamamemachaca4767 2 года назад

Taeha Tapes

@oatmilk9918 2 года назад

@@dickangelsamamemachaca4767 a happy coincidence or big brain foreshadowing

@LandonQizilbash 2 года назад

Makes me wonder what other mods we haven’t discovered

@leonardermel 2 года назад

@@LandonQizilbash Recording every sound test underwater, for example.

@PitiPablo_ 2 года назад

Love how a single tape can drastically change how the board sounds, like my entire life.

@tipi5953 2 года назад

lmfao sus?

@19-villenaramiahjemuel82 2 года назад

Bro i used flex tape to fix my life :)

@jequavious6913 2 года назад

@Lilyium 2 года назад

This is what modding should be like, one step at a time, lots of patience and trying to tune it bit by bit until you are satisfied with the end result.

@innovativeadvertising6463 Год назад

Hey, user! Thanks for the comment! Have you considered checking out the HOTO Compressed Air Capsule? It's a compact and versatile cleaning tool that can help you maintain a spotless environment on your desk, in your car, and more. With powerful vacuuming and blowing capabilities, it's definitely worth considering! Let me know if you have any other questions or need further recommendations. Happy tech-talking!

@grant4837 2 года назад

This was great to watch, loved the iteration and side by side as you progressed. Looking forward to trying these out myself.

@fluffykeebz 2 года назад

When you said coming soon, you really werent kidding . Loved the step by step sound comparisons! The touch with the SA spacebar at the end *chefs kiss*

@3ildcat 2 года назад

haha yeah the SA spacebar is just a magic bar

@shiolei 2 года назад

Awesome demonstration of so many different mods! Great to hear so many different sound tests.

@biancadionisio5835 2 года назад

You never seem to disapoint

@chriseyre527 2 года назад

Thanks for this! I did the two tape mods and it's gotten rid of the ping! Now the keychron is sounding waaay better!

@halfpennyc 2 года назад

Dude you are magician. You took a board which sounded pretty horrible + super hollow - and made it pop and sound like a premium keyboard. Thanks for leading the way again!!

@prithvib8662 2 года назад

I like how you edited the video to show progression after each mod. very easy to follow. Would like to see a comparison of each mod vs stock but I understand if that takes considerably more effort.

@innovativeadvertising6463 Год назад

Hey there, I've been using the HOTO Compressed Air Capsule for a while now and it has been a game-changer for keeping my desktop and keyboard clean. The vacuuming power is impressive, and the blowing function is great for dusting off hard-to-reach areas. It's definitely worth considering for your cleaning routine!

@typingworks 2 года назад

im so glad you added an SA spacebar clip at the end, it literally sounds like a masterpiece

@aaronworsnop 2 года назад

This is really helpful, definitely going to be looking into this for my personal build on the channel :)

@hermv9994 2 года назад

i like to see how you show every mod and improvement in sound. Really guiding how each mod changes the keyboard, especially tape mod! Keep up the content

@Ilusm1337 2 года назад

Great mod, it almost eliminates the case pinging sound. except for the the side and arrow area. There is no save for those. The SA spacebar is so thocc.

@mrdestroy4381 2 года назад

Great vid bro, love the side by sides and edited steps. Nice work thanks again

@totallynotajay5443 2 года назад

Your tape is very precise, makes me wanna redo mine. Great video

@helloimash 2 года назад

Would you please consider making a wire balancing tutorial? I always struggle with it and a detailed guide with your tools and methods would be so helpful! Thank you for everything you do. ☺️

@3ildcat 2 года назад

Maybe this part ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B1TodVGvF2g.html

@1000deaths 2 года назад

good stabs very rarely need to be balanced

@grant4837 2 года назад

I think employing the iPhone 4 method is key.

@tombaker2510 2 года назад

You really don’t need to worry about wire balancing. So many keyboard builder never balanced the wire in their life and they have made hundreds of boards a year. Just do the holee mod and you never need to worry about it again

@AI-zd4yb 2 года назад

@@tombaker2510 I've seen a bended wire from a new keyboard before so you're not really convincing

@sonicatedvesper 2 года назад

This was great! I need to find time to try this during winter break. Cheers.

@zackary87kr Год назад

Wow... the level of preparation and presentation in the video is amazing. This must have taken a long time to make. Great job~~

@FallenKat 2 года назад

Was waiting for this Vid, since you always do such good mods for Keyboards, am not disappointed

@SeraphimKnight 2 года назад

Going from sounding like you're typing on a literal frying pan to a fairly decent sound, what a glowup.

@ffffff1-mmmm 2 года назад

there is still a ringing sound on the right side of the board that you can hear starting around 9 min. this still is a very impressive modding and based on the typing tests, a huge improvement from the start

@SleepyCarr 2 года назад

Thanks wildcat, I'll use this video as reference to mod my Q1 once it's arrive :3

@jihwankim5190 2 года назад

스테빌 교체 귀찮아서 미루고 있었는데 기판만 뜯어 내시는거 보고 머리 탁 치고 갑니다... 감사합니다....

@Miss_Wonderful1 2 года назад

Now it sounds very, very nice! I had never used tape and I see it makes a huge difference. I will try tomorrow on my Snowfox (very first keyboard, now half destroyed by cats...lol).

@HybRidChrome 2 года назад

Tape is very efficient for modding, I love it

@tunatuna8877 2 года назад

I did tape mod along with adding moon gel instead of silicone tape. That along with gmks and it sounds fantastic. I believe it was designed to filter higher freqs on drums and cymbals.

@ayewhaddupdoe Год назад

They don't filter anything. They just shorten the sustain of the batter head of the drum, so the often ugly resonance disappears. Kind of chokes out the head after the initial transient.

@sghound 2 года назад

omg the PBT sounds so good

@octavia7466 2 года назад

Ngl, that Korean stab mod is really interesting, never seen it before

@klarenz8615 2 года назад

I have Q1 on the way, and thank you for this :3ildcat, I hope it'll sound similar since I will follow the modding that you've did. Great as always!

@3ildcat 2 года назад

Good luck!

@itsliviy 2 года назад

Just when I thought it couldn't sound any better, it did

@matthewheadland7307 2 года назад

The attention to detail is insane-on the keyboard and the editing of this video… like… jesus

@ginnotbrandy2090 2 года назад

The additional mods do a great job, but from my experience a third layer of PCB tape removes pretty much all audible pinging even without changing the case foam. It could also just be that my switches being different affect the sound as well.

@3ildcat 2 года назад

Case ping can't be fixed by the PCB taping tho. Different sound source in my opinion

@musawi2156 2 года назад

I used double sided adhesive tape inside my keyboard with few holes in it. It sounds great!

@itchyo1804 2 года назад

i think for the Q1 the polyfill mod is the best for dampening the sound. Once i tried it literally all the ping was gone, and it doesn't remove too much of the flex either. I also switched the stock plate out for a PC plate so that probably helped with the resonacne too. Super happy with the Q1, might even buy a second one just to do a boba U4T build

@marpilbrosal 2 года назад

Yeah, I tried all everything but still ended up using Alexotos' mod since it sounded best for me too!

@obentoubako 2 года назад

Amazing! You really have the magic touch :)

@chompiechomp6341 2 года назад

Dang I love how detailed your mods have been in this video! Great work as always! uwu

@largestbrain 2 года назад

You just made all percussionists very proud

@takoyakeys 2 года назад

Silicone tape prices going to skyrocket now! I have to try it out for myself! Great work as usual

@3ildcat 2 года назад

haha if so, sad Good luck and thank you for your great support, takoyakeys!!

@simpledj509chromo7 Год назад

I just bought my first nicer keyboard, a Corsair k100, and it got me thinking that I might like to build a custom unit soon. But I'm not so sure. I'll hold off for a while. This Corsair is a massive upgrade from my last one, and I like it a lot. I am not sure I have the patience to mod or build a board. Especially with all the options for switches and key caps and mods and lubing and stabilizers. For now I'll call it a little overwhelming. But this video was great and I thank you for showing the process and the differences as you made small changes step by step.

@ZynthProductions 2 года назад

Omg thats sounds so good now. Far than before

@iboopedyournose 2 года назад

So niceeeeee. What a difference… you can tell how much experience :3ildcat has building boards he knows p much just how much he needs 😱

@andrewmiller7960 2 года назад

You have always been one of my favorite keyboard content creators. Real craftsmanship. Way better than hippyotech. What kind of name is that anyway?

@CAP0VELLI Год назад

I had an old mouse mat about 2mm thickness which i cut to shape and used as the dampener. Works pretty well.

@tejajonas 2 года назад

For me additional foam (provided by keychron) and two layers of silicon tape on the base around the holes eliminated the ping.. Thanks to keybored and wildcat!

@timtim4726 Год назад

Nice work and sound. I like you video edit. What transitions did you use in splitscreen before-after comparison shots?

@UbiquitousDIY 2 года назад

I used a sheet of 0.6mm thick adhesive backed silicone sheet on the back of the pcb and it transformed my q1. Thoccythocthud now.

@O_zi_sk 2 года назад

업로드 하신 영상 모두 늘 놀라운 마음으로 잘 보고 있습니다☺️ 영상을 참고해서 지난 달에는 저도 처음으로 핫스왑 키보드 하나를 직접 윤활해봤는데 결과가 너무 만족스러웠네요😳 앞으로도 많은 영상 부탁드리겠습니다. 감사합니다.

@3ildcat 2 года назад

처음으로 하셨다니 보람도 있고 만족감도 크실 것 같습니다 수고하셨습니다 ㅎㅎ 좋은 말씀 감사합니다

@bnsnjng 2 года назад

i just bought my keychron q1 so this video is helpful

@shakir4969 2 года назад

That SA spacebar is delicious!

@alfonzoperez7467 2 года назад

thank you ive been trying to get rid of ping noise and the tape helped so much now when i hit the metal it sounds like im hitting my desk no metal sound

@ItsMe-od1js 2 года назад

Great video! I'm new to mechanical keyboards, the keyboard I'm using now is MX Keys but I don't like the feel after some hours of usage, would you consider using Gateron Phantom Browns, I'm really interested in those, and I would like to know how they sound with those mods.

@bloop7282 2 года назад

gawd damn the sa spacebar

@CHITUS 2 года назад

업로드 하신 영상 모두 늘 놀라운 마음으로 잘 보고 있습니다️ 영상을 참고해서 지난 달에는 저도 처음으로 핫스왑 키보드 하나를 직접 윤활해봤는데 결과가 너무 만족스러웠네요 앞으로도 많은 영상 부탁드리겠습니다. 감사합니다.

@SilverSwagboss 2 года назад

Wow the tape makes that board sound way better, might have to consider getting that over a wooden tofu60

@pqches 2 года назад

I recommend tofu65 over this and tofu60

@raytsh 2 года назад

Worth mentioning that the Q1 V2 fixed the case ping and brought additional improvements.

@user-rz4oe3fx9m 2 года назад

이야 양면테이프의 차이가 이리 클줄은 몰랐네요. 테이프 기술 두가지 배워갑니다

@UpgradingAsUsual 2 года назад

As soon as a volume encoder comes in, I'll buy it. In the meantime, my GMMK Pro will serve me better. The gasket mount on the Keychron Q1 is way better.

@Maitreya3001 2 года назад

Damnnnnnn that's exactly what I want my Q1 to sound like

@ajityadav-nh6if 2 года назад

this guys knows more than a company how to make products

@johnpalcon7570 2 года назад

holy shit that sounds so amazing

@Eshcole 2 года назад

Love the sound of the GMK Olivia caps. Such a satisfying video.

@jarellalvarez9517 2 года назад

Amazing vid!! What if you didn't or can't find Silicon Gasket, what would you use as a substitute instead?

@saucyg6371 2 года назад

Since I’m listening with headphones at full blast, I can hear ping especially on the right cluster above arrows. I was just wondering if this is noticeable irl/in person? Often times mics pick up subtle nuances/details in sound tests that get drowned out in person. Sound tests are often times boosted as well. Additionally, this is the only sound test w tape mod, different foam/damper material than stock, and some material near the screw holes in between the two case halves that I have heard ping. So I am just thinking that it’s the recording setup/settings and that the ping is barely noticeable, if at all, in person. Lastly, have you ever tried polyfill as a damper?

@amirbahrun3098 2 года назад

That SA spacebar at the end starting to make up some beat..

@user-xe1ei1cy6v 2 года назад

이것저것 하나씩 경험해보던 차에 가스켓풀알루 맛을 보고 싶어서 영상들 보다가 들어오게 되었습니다 ㅎㅎ GMMK PRO와 함께 눈팅 중인데, 와일드켓 님은 둘 중에 무엇을 추천하시나요?^^

@peterho71 2 года назад

awesome review.. good information and mods that would be beneficial to someone who wants to get this keyboard..like myself .hehe. keep up the great VDOs

@NameLess-lk2qu 2 года назад

that SA Spacebar is for eargaaaaasm

@burtonyan8467 Год назад

I've just bought one fully assembled for the convenience, but this is making me think about doing something to it...

@cutcorners6005 2 года назад

I havent been able to improve the mods on the right column. they sound hollow no matter what but rest of the board is pretty good. even with pe foam they sounded hollow for me.

@dmin9053 2 года назад

와.....커스텀 키보드가 그냥 키보드를 한 개 제조하는거였군요...ㅋㅋ 정말 감탄 밖에 안나오네요 ㅎㅎ

@user-qn1zj5bs5p 2 года назад

i think the most improved spot is the 2 side of poron gasket , because they comes with empty and it directly contact with the top housing

@RucidaBlackletter 2 года назад

beautiful

@Sheepscomb 2 года назад

테이핑 신기하네요 ㅋㅋㅋ 알파열이랑 가장자리 키랑 다른 것도 재밌구요

@Capitan_Cavernicola_1 Год назад

Great video! Is this the Q1 black metal case? It looks dark green in the video.

@rhiannn3416 2 года назад

beautiful.

@poppae7433 2 года назад

wow, the tape mod really works. when I first heard of it i thought it was another stupid mod that some random person decided to make, but now that I try it on my keeb I love this mod and I will use it for the rest of my projects!

@ThockyDocKey 2 года назад

the q1 is an awesome board, remove the ping and you are good to go. It's quite easy to do as well. Force break mod :)

@holiclove 2 года назад

영상하나에 모든것이 담겨있네요~ 매번 구경만 하다가 ㅎㅎ 첫 애기로 Keychron Q1 노브버전을 들였는데 하나하나 만져보기좋고..ㅎ Mountain Everest Max 랑 키크론이랑 해서 두개 메인으로 쓰게 되네요 키크론이 상당히 가성비가 좋은거 같아요 많이 배우고 가네요 (__)

@Ontheregz Год назад

I know this old but what keycap set is the first one? Looks awesome, I want to get that set for my Q1v2

@gibouse4253 2 года назад

love the vid

@Brudder 2 года назад

Tape is life. Your editing continues to inspire me :3ildcat. Great video :)

@3ildcat 2 года назад

Thanks ❤️

@tigerpark2252 2 года назад

안녕하세요 영상 잘 보았습니다 . 팬텀 스위치는 어떤가요? 공장윤활을 제외하고 설계나 재질이 일반 게이트론축과 같은가요? 아니면 프로나. 잉크쪽에 가까운가요?

@oskargustafsson1173 Год назад

Hello! This might be a bit late but had a question about the mod. Just bought the Q1 pro and was wondering if you think the tape mod still works on this even though there is a battery in it? I am thinking of getting non-conductive tape for that reason. Also, when doing the tape mod, do you remove the case foam that goes between PCB?

@poppygin4807 2 года назад

A-B sound testing are the best, easily see the result

@user-do5fh1vn4u 2 года назад

커스텀의 차이가 어마무시하네요 ㄷ

@JaeyouPark 2 года назад

the English video title variant is 🔥

@muCephei_ 2 года назад

Keyboard hobby will never be the same. A lot of people will be saving their money with these mods.

@maachtms 2 года назад

Hi 3ildcat! Thanks for the video. I had a question - what does adding the small foam bits at 5:50 do?

@stoofyboof4399 2 года назад

If you're talking about the little foam blocks he puts on the sides of the plate, those are the gaskets. It's what allows the board to have that soft flexing feeling, and it's pretty much what makes this keyboard special.

@randymarsh4748 2 года назад

do u think the silicone gasket tape is really necessary? should i buy some for my q1 if i dont have it already or should I just use the masking tape i have