Smart Home - How to start with KNX

Подписаться 39 тыс.

Просмотров 297 тыс.

50% 1

This is the first episode of Smart Home Automation Series, regarding KNX. There will be several videos for KNX that will learn you how to install, program and visualize KNX devices!
Please have in mind that in order to work on a KNX project you need to be certified.
You can find Certified KNX Training Centres in the link below.
www.knx.org/knx-en/for-profes...
Poseidwn Tech on Social Media:
www.poseidwn.tech
/ poseidwn_tech
/ poseidwn.tech
/ poseidwn.tech
/ poseidwntech
Smart Home Playlist : • KNX Tutorials
KNX Web Page : www.knx.org/knx-en/index.php
ETS Software : www.knx.org/knx-en/software/e...
KNX Training : my.knx.org/
KNX Basic Course Documentation : amzn.to/2pASDCM
KNX Advanced Course Documentation : amzn.to/2I1mw68
Visualization Software : iridi.com
Smartdraw : www.smartdraw.com/
Techsmith Capture Software : www.techsmith.com/screen-capt...
Tools
Facom Cable Stripper : rover.ebay.com/rover/1/711-53...
Knipex Electronics Super Knips Comfort Grip : amzn.to/2EO76Fg
Knipex Self Adjusting Insulation Strippers : Knipex 1262180 Self Adjusting Insulation Strippers
Bright Red Led Screwdriver Multi Tool Voltage Tester : amzn.to/2FqTyMJ
KNX Devices :
Vimar KNX Switch : www.vimar.com/en/int/catalog/...
Weinzierl KNX Baos 777 : www.weinzierl.de/index.php/en...
MDT KNX Dimming Actuator : www.mdt.de/EN_LED_Controller.html
K-Bus KNX Power Supply : www.video-star.com.cn/en/Produ...
Electric Devices
Schneider Electric Circuit Breaker : www.schneider-electric.com/en...
Master Electric LED Controller : www.master-electric.gr/produc...
Mean Well 24V DC Power Supply : amzn.to/2EPx62U
Led Stripe 24Volts : rover.ebay.com/rover/1/711-53...
Music :
PACIFIC SUN by Nicolai Heidlas Music / nicolai-heidlas Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Video

Наука

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@PoseidwnTech 6 лет назад

Thank you all for your support! KNX Tutorials Playlist : ru-vid.com/group/PLNJVyvij10Ftuv3Ng7gcBgU-Ztco8T_SJ

@ride1000 5 лет назад

I`m not commenting so often on youtube videos, but yours deserves that. Very helpfull introduction to KNX.

@PoseidwnTech 5 лет назад

Thank you very much for your comment. I really appreciate it!

@omar0555 6 лет назад

This is one of the best videos for KNX explains. Witting fro next episode. Thank you very much.

@PoseidwnTech 6 лет назад

Thank you very much for your comment! The next episode will be available soon!

@mambo154 3 года назад

Thank you for refreshing what i learned in school a couple years back :)

@PoseidwnTech 3 года назад

You are welcome! Thank you for your comment!

@mariospetaj8864 5 лет назад

Φίλε πραγματικά είσαι απίστευτος, σου βγάζω το καπέλο... Από σήμερα είμαι φανατικός σου οπαδός

@PoseidwnTech 5 лет назад

Σε ευχαριστώ για τα καλά σου λόγια!

@smartsystems5548 6 лет назад

If you make reviews for all these products it will be amazing! I am waiting for more. Thank you!

@PoseidwnTech 6 лет назад

I will make reviews for all of them, so stay tuned!

@GroverSecuritySystems 3 года назад

Thanks a lot for the fantastic video!! May I ask such a basic project, what could possibly cost? (just a rough estimations - exclude wiring. Just all h/w parts)

@switch4746 Год назад

Smart Home . Smart Life This is our motto❤️

@PoseidwnTech Год назад

Nice!

@LiborioCannici 5 лет назад

This channel is the best! Thanks a lot. Would you please make a video about Heating Actuators and thermostats?

@PoseidwnTech 5 лет назад

Thank you for your comment! Of course there will be an episode about KNX Thermostats!

@tanachotekongsang8917 6 лет назад

Thank a lot ! very helpful .

@PoseidwnTech 6 лет назад

You are welcome!

@baboulama 3 года назад

Hello, Many thanks, those videos helped answer a lot of questions I had about KNX. As you have a broad knowledge of Weinzierl devices, I would have a question about the Multi I/O 570 : I would like to use it to read the state of regular switches in a house (As I would prefer them over push-buttons) and wonder if this unit can trigger a telegram whenever a regular switch has its state changed (regardless if it changes from off->on OR on->off). I would then simply toggle an output on each rising or falling-edge for example. From their documentation I feel like it is possible but I'm not 100% sure.Also would see any reason not to go for this setup ? Many thanks for your insights, have a lovely day !

@smainbenali5393 3 года назад

Verry good explain... Thanks

@PoseidwnTech 3 года назад

Thank you for your comment!

@guygadbois1068 5 лет назад

Thanks for doing this! I'm currently setting up a KNX system myself, and my KNX bus cable has 4 wires like yours but with an additional bare copper wire in there too, what would that be used for??

@shlepkovac3759 5 лет назад

i guess thats just a ground wire

@vellano716 4 года назад

Excelente explicação e didática ,,, parabéns pela iniciativa e ajuda aos profissionais .

@PoseidwnTech 4 года назад

Thank you!

@thanhtranminh5962 6 лет назад

Great, more video tutorial is needed

@PoseidwnTech 6 лет назад

Thank you for your comment! You can also check : How to program KNX Devices - KNX Programming Tutorial : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WxD8TScEAP4.html KNX IP Baos 777 - Visualization and Voice Control with Alexa : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2It2pQsjwAM.html More episodes will come in a while!

@oekalaboeka55 4 года назад

Thanks for the comprehensive tutorial! What I don't understand though why do you need a led controller, 24v power supply and a dimming actuator? I thought if I'd get the MDT AKD-0424R.02 that this unit would provide the power and dimming capabilities for the led lights to dim, power on and switch on & off? Am I wrong in my assumption? Either way good video man :)

@PoseidwnTech 4 года назад

In this video i used a 1-10V Dimming Actuator and that is why i had to use a LED Controller. 1-10V Dimming Actuators are very common and you can use them to drive Led Strips without worrying about the load. MDT AKD-0424R.02 can drive directly 1 to 4 Led Strips (4A per Channel) without the need of external LED Controller.

@socheat1111 4 года назад

Very good,.. tutorial

@PoseidwnTech 4 года назад

Thank you!

@BenjamimAlvesFigueiroa 3 месяца назад

nice video, thank you for help me 6 years later

@PoseidwnTech Месяц назад

I am glad that my video helped you!

@TriNguyenMinh22 6 лет назад

Great video! Could you please give a shortlist items and where to purchase as well?

@PoseidwnTech 6 лет назад

Thank you! You can find the list of all KNX Devices in the description section of this video. For every product at the beginning of this video there will be a tutorial, so stay tuned!

@boubkerabdo2619 3 года назад

Thank you very much

@PoseidwnTech 2 года назад

You are welcome!

@ghulamhazratehsanyar5590 4 года назад

thanks for the helpfull vedio, can you tell me what kind of program or software have you used for drawing of the knx component?

@PoseidwnTech 4 года назад

You are welcome! For my drawings i used SmartDraw : www.smartdraw.com/

@JohnSmith-kb5ku 2 года назад

Cheers bud.

@mathanc1177 4 года назад

Good one..!

@PoseidwnTech 4 года назад

Thank you so much 😀

@waltermessines5181 6 лет назад

Great video, very clear. Thanks. Can I suggest something: add a short demo of the end result at the beginning and end. Like: We are going to build this functionality... Your showing of the end-result was only a few seconds. A bit more time there would make it easier to understand what the goal (end-result) is.

@PoseidwnTech 6 лет назад

Thank you for your comment! I will try to do that to the next videos!

@nikoboulikas1631 2 года назад

Μπράβο επαγγελματίας!

@PoseidwnTech 2 года назад

Σε ευχαριστώ για το σχόλιο!

@nikethanpoojary6361 3 года назад

Very useful video sir thank you.... Please share how to connect motion sensor with knx

@PoseidwnTech 2 года назад

Thank you for your comment! I will try to make a video for KNX presence detector.

@ebikarimi1983 Год назад

hi, how can send date and time over knx devices? which device proper for achieve this? thank you so much

@ArduinoHellas 6 лет назад

Great video Poseidwn,can you tell me what is the name of this simulation program?

@PoseidwnTech 6 лет назад

Thank you! The visualization program i am using is Iridium Pro by Iridium Mobile. www.iridiummobile.net/pro/

@mohammedmadani1255 6 лет назад

AWESOME AWESOME AWESOME

@PoseidwnTech 6 лет назад

Thank you!

@hamidnz7678 5 лет назад

hi .thanks for video .i have a question about smart draw .devices which you located in smart draw are pictures or are schematic of real device?how can i add them to the smart draw and wiring them same as you

@PoseidwnTech 5 лет назад

I used images from the real products(Insert --> Picture) and then i connected them using the line tool of smartdraw. I will make a short video about this, so stay tuned!

@scottpatrick2394 6 лет назад

Which is the building with the pool at the beginning of the video ?. Good job, keep going.....

@PoseidwnTech 6 лет назад

Thank you! This is a Hotel in Greece!

@scottpatrick2394 6 лет назад

Very beautiful country, I would like to come for holidays.

@burritotrap 6 лет назад

Very nice

@PoseidwnTech 6 лет назад

Thank you!

@NielsMer 2 года назад

Maybe a stupid question… why do you need a second power supply for the LED stripe? You already have a power supply for your installation?

@jactahujack2325 4 года назад

Hi very helpfull and easy for biginners to understand. I am interrested to know thé price of all parts in tout démonstration. Thanks and keep on tour vidéos.

@PoseidwnTech 4 года назад

Hi! Thank you for your comment. For prices please contact the manufacturers or your local distributors.

@NguyenCuong-io3bz 5 лет назад

Hi ! Can you use smartdraw software to draw intelligent knight lighting control knx using RM / S 2.1. tks very much

@PoseidwnTech 5 лет назад

Hi! I am not sure that i understand. Do you need the connections of ABB Room Master?

@NguyenCuong-io3bz 5 лет назад

@@PoseidwnTech Thank you have reply comment of me. I am learn on Room master in the lamp control, do not know any connection, you can only be only? tks.

@imanraoofat8565 3 года назад

god job

@PoseidwnTech 3 года назад

Thank you!

@adilsonteixeira2384 5 лет назад

Great video! Could you also provide a list of materials so that we can start practicing ?

@PoseidwnTech 5 лет назад

Thanks! The KNX devices are : 1) K-Bus KNX Power Supply : www.video-star.com.cn/en/ProductsDetail.aspx?code=010107&id=27 2) MDT KNX Dimming Actuator : www.mdt.de/EN_LED_Controller.html 3) Vimar KNX Switch : www.vimar.com/en/int/catalog/product/index/code/20840 4) Weinzierl KNX Baos 777 : www.weinzierl.de/index.php/en/all-knx/knx-devices-en/knx-ip-baos-777-en You can find also useful links in the description section of this video!

@henrytran963 4 года назад

@@PoseidwnTech thanks for great video, I love to start to integrate with our alarm system, camera, alarm, intercom, locks so can you suggest the list of KNX units.

@salehbaker9221 5 лет назад

where did you buy knx bus cable?

@PoseidwnTech 5 лет назад

Hi! For KNX bus cables i am using local stores with electrical supplies in Greece.

@real-neo-altair 3 года назад

what is a circuit breaker and why do I need it? why wouldn't I just plug the power supply into the power outlet directly?

@PoseidwnTech 3 года назад

A circuit breaker is an electrical switch designed to protect an electrical circuit (in our case the KNX Devices) from damage caused by excess current from an overload or short circuit. In this video i made an electrical demo cabinet so i tried to make it as close as possible to a real installation. Of course this was only for Demo, since in a real installation further protection is required.

@TimoDJatomika 6 лет назад

where can I find the Video about the KNX controller from Weinzierl?

@PoseidwnTech 6 лет назад

You will find it in a few days... Now i am working on the Episode 2 that it will be about ETS and the next one will be a review of Weinzierl Baos 777!

@PoseidwnTech 6 лет назад

You can find the episode regarding KNX IP Baos 777 to the following link : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2It2pQsjwAM.html

@Interlinked404 3 года назад

When downloading the program to the device, the download fails and it prompts that there is an error writing to the memory block. What is the reason?

@PoseidwnTech 3 года назад

Try to restart the KNX device and try again. Are you sure that you are using the correct library for the device? Have you tried to make a full download instead of partial download?

@dimitriuskavouras2918 3 года назад

Ωραίο βίντεο έβγαλες. Δουλεύω με αυτοματισμους εδώ στον Καναδά. Η τυποποίηση εδω δεν είναι KNX είναι BACNET. Έχουμε και MODBUS που και που. Έλεγα να μετακομίσω Ελλάδα να κάνω αυτοματισμους εκεί αφού είμαι και Έλληνας.

@PoseidwnTech 3 года назад

Σε ευχαριστώ! Αν και δε γνωρίζω πως είναι τα πράγματα στον Καναδά για να συγκρίνω, πιστεύω ότι στην Ελλάδα θα υπάρχει αντικείμενο να ασχοληθείς.

@muhanadalabiri1940 5 лет назад

Please someone help me , i didn’t get the all required components for KNX system , because of my English. 1- power supply 2- 3- 4- 5- What r all of them ??

@PoseidwnTech 5 лет назад

1) Power Supply 2) Sensors (Switches, Thermostats, Brightness Sensors, etc) 3) Actuators (Switching Actuators, Dimming Actuators, etc) 4) KNX Bus Cable

@muhanadalabiri1940 5 лет назад

Poseidwn Tech so these are the all things i need to convert my home to smart. Thank u so much for helping

@muhanadalabiri1940 5 лет назад

Can i ask u please : how much approx each one cost.

@Interlinked404 3 года назад

将程序下载到设备时，下载失败，并提示写入内存块时出错。原因是什么？

@PoseidwnTech 3 года назад

Try to restart the KNX device and try again. Are you sure that you are using the correct library for the device?

@georgekapralos6549 4 месяца назад

Καλησπερα Μπορεις να με συμβουλέψεις για μια μισοτελειωμένη εγκατάσταση στην περιοχή της ΒΑΡΗΣ αττικης;

@PoseidwnTech 4 месяца назад

Καλησπέρα, μπορείτε σας παρακαλώ να μας στείλετε email στο info@poseidwntech με τα στοιχεία σας προκειμένου να επικοινωνήσουμε μαζί σας;

@AhmedAli-li1rh 10 месяцев назад

Name of program please

@jameelqaid8761 5 лет назад

i wanna ask for meaning KNX what full name.thank you

@PoseidwnTech 5 лет назад

I believe that it comes from the latin word "CONEXIO" which means Connection. So "CONEXIO" --> "KONEX" --> "KNX" When i will find the original source for the meaning i will write it in the comments!

@jameelqaid8761 5 лет назад

@@PoseidwnTech i will be thank you