Smog Delete 88 GT 

Thanks man!

Alec T - you bet. Glad it helped!

Do it!

I would only be able to recommend measuring and starting from scratch. There’s another video I have for the alternator bracket delete where I might mention some sizes at the end. But I removed my AC long ago so I’m not sure what size you would need.

Hey thanks man!

@@Foxedup My vehicle is a bit different I have a Ford F150 1995 straight six 300. Would you happen to know if it’s the exact same set up on my motor

@@mikefuzzy8795 I would imagine there are some similarities, but couldn’t say for sure how similar it is. Haven’t even seen one of those!

There’s a video for that! Altered Fox is out of EGR delete kits right now, but they should have some soon.

@@Foxedup awesome sounds good and thank you!

Yep

I picked up the Ford AC Delete kit. You pretty much have to use that or a bracket with a pulley on it. Here's the one on Amazon: amzn.to/31KnfSC About $10 cheaper from LMR but I think you pay shipping. LMR also has some discount codes form time to time.

Of course! That’s the only way to live!

I didn't remove quite enough of the vacuum lines in the video. I ended up removing another section and plugged every open line. If you leave any lines open, you're not going to idle right. There is one that I believe connects under the upper intake, but I cut it and capped it where I could see it. I'll plug the actual intake the next time I take it off. That was some random plug I had laying around, but you can use any bolt to clamp into a piece of hose. You can DM me on Instagram and I’ll send some pictures or a video. @gotmyphilosophy

@@Foxedup I would but I don't use any form of social media so... Sorry. How many vacuum lines did you have to cap? I thought there was only the one left from the manifold after you remove the pump?

Mike Demauriez - I’m adding a link to another video in the summary

@@Foxedup thank you!

Todd Supraman - perfect. If the heads are plugged off then you’re all set.

No - just make sure there aren’t any vacuum leaks.

Yes you can do that no problem.

Yes you can remove those hoist brackets

Yeah I’ll need to put a plate over the holes in the EGR.

That might be a solution. Not sure how I would cap it, but I’m sure its possible.

Cause I didn’t know what I was doing! I’ve since removed those.

Rick Severn - No issues other than capping a vacuum line further back than what is shown in the video. You can DM me on Instagram and I’ll send a picture or two. @gotmyphilosophy

Mista Nino - no detectable performance effect. Just a slight weight reduction but mainly cleaning up the engine bay.

@@Foxedup right on thanks

got my philosophy did the check engine light 💡 come on after this modification? You started the “climate Emergency 🚨 “ 😹🤣 Great 👍 vid thanks Sub 88 ✨👽🔨✨

got my philosophy it was such a pain getting at those back 2 spark ⚡️ plugs 🔌! Are you in Alberta? 🇨🇦 Were in Edmonton