Smoke and Fumes Updated Information

Подписаться 83 тыс.

Просмотров 4,4 тыс.

50% 1

This is an update to the video about the Comgrow Enclosure and Smoke Absorber posted a couple of days ago.
Here is a link to the original video, which contains a complete review of both products and useful information about measuring smoke and fumes in your workshop.
• Smoke and Fumes from 3...
Comgrow Home Page
www.comgrow.com/
Affiliate Link to Smoke Absorber
amzn.to/3E7vvkF
Affiliate Link to Comgrow Laser and 3d Printer Tents
amzn.to/3E4Z3zu
Affiliate Link to Big Gulp Hood
amzn.to/3V0Eew1
Affiliate Link to VIVOSUN D4 4 Inch 195 CFM Inline Duct Ventilation Fan
amzn.to/3tsS6DD
Affiliate Link to Flexible Duct
amzn.to/3tuIbNV
---
The MakeWithTech channel teaches people how to use desktop technology to create, innovate and make things. If you are a "maker" and want to learn more about 3d Printing, 3d Printers, 3d Printing Slicers, Computer-Aided Design (CAD), or 3d Modeling, this is a place you should visit often. The channel includes additional content about using a wood lathe, woodworking, laser engravers, and single-board computers such as the Raspberry Pi, Adafruit Circuit Playground, ESP32, and Python. Available reviews are about Prusa, Creality, Monoprice, ANET, Flsun, Fokoos, JG Maker, and Flashforge 3d Printers. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker. CAD design videos cover TinkerCAD, FreeCAD, OpenSCAD, and Shapr3D. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker.
---
Let's continue to learn together. Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions at no cost to you and help support the MakeWithTech video production and purchase of products for reviews, labs, forums, and websites.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewit...
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewit...
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewit...
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewit...
I will be covering basic electronics and software in future MakeWithTech segments, and here are the products I am using:
➡︎ kit.co/makewit...
Some of the Woodworking products I use:
➡︎ kit.co/makewit...
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you visit the site directly. These sales commissions help to support the MakeWithTech channel. (makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all Equipment and tools at risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open-source clip art and third-party images. Images and videos used in product reviews and tutorials are from the original product (software or hardware) manufacturer's site.
** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@philnelson2364 Год назад

You should have proper filters between the comgrow hood and fan or the particles will coat the blades and get into the motor itself. Maybe a filter box going to the fan.

@MakeWithTech Год назад

Good suggestion.

@bwselectronic Год назад

@Make with Tech I was wondering what would happen if you put an N95 on the exhaust side of the smoke filter. It might block too much ofvthe airflow of the smoke filter I'm not sure. Just a thought.

@MakeWithTech Год назад

I couple of people have suggested this. It is worth a try.

@StumblingBumblingIdiot Год назад

Very nice! I bought a laser engraver and got that exact same inline fan and the comgrow enclosure to try and bring it in the house from the garage so I could play during the winter but my basement is concrete and i have no vent to the outside :( We even have to vent our dryer into a container of water since we have no outside vent. With your knowledge could you think of a way to use this setup without an exhaust fan in the wall? I was thinking of trying to exhaust it up the chimney but then I wouldn't be able to use the fireplace. We do have some windows and I was thinking of building a box with insulation packed in it to keep the window open and have the exhaust fan in the box rather than the wall but I just don't know how that would work without being able to close the window for rain and snow. Anyway, very nice follow up and I will try and kick my brain into high gear to figure out my situation!

@waynec96 Год назад

any plans to review Creality Sonic pad anytime soon?

@scitzz Год назад

I've recently setup my first 3d printer and plan to move into ASA. I've had a similar idea to ventilate, using a dryer outlet that I'll add to the wall. The other difference is i want to have a manual switch for after the print is finished, and a thermostat to turn the fan on and off to maintain an optimal temperature in the enclosure.

@yeroca Год назад

Good idea on the dryer outlet, which has a self-closing flap.

@scitzz Год назад

@@yeroca kind of what i was thinking. I'll live here forever so i don't worry about resell. Keeps insects out and i can add to it to ventilate solder fumes

@thelimike Год назад

This is very good thanks for teaching

@kevinjones6924 Год назад

Thanks for the update Irv, quite interesting! Just wanted to remark on your setup with the ductwork. Eliminate the bends and excess ducting and you'll draw out a lot more smoke and smell. The other best practice for ductwork is to reduce the length as much as possible to gain additional draw. This may mean rearranging your setup so that your engraver(s) and/or printer(s) are closer to the exit point. Unless your bathroom style vent on the wall is the same or better, it will actually diminish(restrict) the cfm's of your inline fan. Just my 2 cents from my HVAC experience 😊😊

@noverman Год назад

should the vivosun fan be closer to the exit if not replacing the bath fan completely? so that it is pulling the air more vs pushing

@kevinjones6924 Год назад

@@noverman 💯! I completely missed that, thanks Nick! 😊 👍

@MakeWithTech Год назад

Good suggestion. I'll give it a try.

@kesor6 Год назад

Excellent tip! I have a similar setup with my Voron V2.4 and a special window slot for my sliding windows, where everything is 3D printed and other than the flexible hose and some 12V computer fans I didn't really need to buy anything extra.

@MakeWithTech Год назад

Thanks for sharing.

@yeroca Год назад

I think anyone using a laser engraver/cutter should be using something like this. Very good solution, though I think probably only one of the two fans is needed. Irv, why didn't you 3D print a custom adapter for your duct to vent fan? Your solution looks functional, but... come on, man! Your lab is full of printers! :D

@MakeWithTech Год назад

Your are correct. Amazon delivers a lot of stuff same day in my area and I wanted to get this update out. I will print a replacement fan cover/adapter when I get a chance.

@yeroca Год назад

@@MakeWithTech Come to think of it, there are likely people who have bought (or are thinking of buying) a laser engraver, but who don't have a 3D printer, so your lathe hood is a good solution for them.

@Townie001 Год назад

On your 1st video you mentioned the cost and availability of The filters and that was enough for me to become disinterested in the whole 9 yd . If you can't get or afford the filters what's the use?

@thomaslapsley7867 Год назад

Just a short note of thank you Mr. Shapiro. I got involved with 3-D printing a few years back and your videos have helped me very much and I'm sure others. Your videos are very educational and clear. You have done so much for the 3-D printing community that I personally wish I could give you a reward. thank you Mr. Shapiro and you look very good in your NYU Dad shirt. Always liked their colors and that shirt represents love. Thanks...

@rescuemethod Год назад

Irv this video is fantastic! Ive been thinking about this for some time now. What's the brand of air quality meter? And does that work well? Ive not bought a 3d printer for concerns about air quality so the tent plus air ducting and fan solves this issue. Your setup breaks it down into an easy solution. For filaments that need a heated environment like PC or CF nylon, we wouldnt want to pull out the hot air so perhaps we would leave it tented and then after its done printing i could turn on the air exhaust system to extract the hot polluted air. Thoughts? Could you test this? Also how much heat does this tent enable the air yo raise by? Thank you !

@HackMonkey Год назад

This is similar to a setup I have been planning for my recent laser acquisition. Also, your link to the hood isn't linking to Amazon, but the first video on the filter/enclosure.

@bobb2240 Год назад

remove the bath room motor and fan, use only the hole in the wall with your new fan . you'll get better air flow.( bath room fans don't move a lot of air)

@MakeWithTech Год назад

Thanks I’ll give it a try.