Sneak Peek of the New xTool F1 Ultra 20W Fiber and Diode Laser Engraver

Подписаться 45 тыс.

Просмотров 4 тыс.

50% 1

#xtool #F1ULTRA #laserengraver
SAVE $1,000 To Purchase - www.xtool.com/...
Offer Good From May 7th, 2024 to May 28th, 2024
xTool F1Ultra
Exclusive Tech - Auto Streamline Production, 3D Curve Engraving, Pixel Algorithm for HD Photo Printing
Working Area - 220*220mm - 220*500mm (with conveyor)
Laser Power and Laser Source - 20W Fiber Laser + 20W Diode Laser
Focus Adjustment - Auto Focus with Camera Manual Focus (Two dots Alignment)
Pre-assembled
Built-in Camera
Product Size - 273*373*492mm, 14.7kg
#Lightburn Software
lightburnsoftw...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser #thangs.com

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@BoredApeYachtClub 4 месяца назад

Any eta .. I’m debating on just an F1 should I wait ?

@TripodsGarage 4 месяца назад

Hope to see a communication from xTool about a release date shortly. It really depends on what you are looking to engrave. There is really no harm in waiting on reviews to come out first, to help make your own decision. However, that is a pretty big savings if you were to put a $100 deposit down right now. Hope you stick around for my review. As always I just don’t sit next to the machine and show what I did. I go the extra mile with long testing, and sharing my settings. Thanks for watching and commenting 👍

@xile6 4 месяца назад

Does the Laser head move up and down for focus? Or is locked?

@TripodsGarage 4 месяца назад

Yeah the whole head moves up and down. Can be auto or manual focus

@midnightsco 4 месяца назад

How do you have it already!! Also, i was wondering if you have an email I could talk to you at, I need to laser some stuff but cannot afford one so I thought I could ask if you could do it for me! Thanks ❤😊

@303round 4 месяца назад

Will this be able to cut deeper than the f1 specifically for silver

@TripodsGarage 4 месяца назад

Yes! Considering the 1064nm on the Ultra is 10x more powerful

@303round 4 месяца назад

@@TripodsGarage sounds good to me!!!!

@GregsMakerCorner 4 месяца назад

It looks great. Hard to justify the price for a hobbyist, but for a small business.. wow!

@TripodsGarage 4 месяца назад

Yeah, I totally agree! This is more for the home\professional business market. Cannot wait to start testing it!

@SuddenImpact53 4 месяца назад

The scene where it was lasering biz cards with a conveyor belt made it seem like no alignment/jig was necessary.

@TripodsGarage 4 месяца назад

Yeah! Seems that the alignment is done with the camera. The conveyor wasn’t included with the review laser. However, if xTool asks if I would like to review the conveyor, it would be a definite YES! I want to see this thing work!

@nathanwolf5547 4 месяца назад

I have the F1, I've put my deposit down on the Ultra.

@TripodsGarage 4 месяца назад

Nice! The F1 is one my favorite lasers. Hope to have a review out soon for the Ultra. Thanks for watching and commenting 👍

@cubansli3099 4 месяца назад

Wow you got your hands on this bad boy. I like the lid on it.

@TripodsGarage 4 месяца назад

When I was told that they had a new machine, I really was not expecting this! It is massive!

@cubansli3099 4 месяца назад

@@TripodsGarage Crazy, Is it very heavy? Would it be good to take to a craft show? I wonder

@TripodsGarage 4 месяца назад

@@cubansli3099 - It weighs about 32.5 LBS - Just a little awkward to move around. However, it came packaged in nice foam with velcro straps. This foam protects the top and bottom and the straps go around the top and bottom. I would save these for transport. It would defiantly help protect the machine in transit.

@cubansli3099 4 месяца назад

@@TripodsGarage Thanks good point, can most likely pack in a tall case.

@kieranclarke135 4 месяца назад

Drool drool drool............. You cruel cruel cruel laser tease!!!!! Nice preview

@TripodsGarage 4 месяца назад

I was drooling while taking it out of the box, almost slid 😂

@mikasmith9096 4 месяца назад

Are the colors consistent?

@itopereira0625 4 месяца назад

The dream machine there !!! Greetings john andres here!!!

@TripodsGarage 4 месяца назад

Hey Andres! Hope you are well? Yeah, I cannot wait to start doing some tests with this machine! I am pretty excited 👍

@SamPosten 4 месяца назад

Yeah I really want to pull the trigger on this but $4k is a no go for me

@TripodsGarage 4 месяца назад

I understand, it is pricey. A galvo fiber 20w (name brand'ish) will be around 2k for bare bones. You add the additional 455nm laser, smart camera, motorized Z, display, tons of ports, and other things, I can justify the price after the $900 discount.

@paulbradley6271 4 месяца назад

@@TripodsGarage Bull you can get 20w fibre machines for $1599 that work with lightburn software.

@paulbradley6271 4 месяца назад

Overpriced!!!

@TripodsGarage 4 месяца назад

Guess it really depends on the buyer. Look what this laser offers over a standard bare bones 20w Fiber. A Raycus 20w is $1,800. Is it worth an additional $2,000(with the $900 off) if you were to add an additional 20w 455nm source, motorized Z, smart camera, light, external touchscreen, and miscellaneous odds and ends. Some might not agree, while other will. Like I won’t buy a luxury truck, when I only use my truck for hauling stuff. I don’t care about all the luxury items. While others want all the extras.