Snow Foams Does they work? Untreated Vs Brute Vs Spritzer 

I'm german, but isn't it do they work ? :P

🤣🤣🤣🤣

Those Germans are funny......at times lol

Haha that was the first thing I noticed Jon! Spent 5 minutes deliberating whether to mention it or not, couldn't even concentrate on the video haha

Hey Jon, looked on their website and you can apply via your foam cannon, a lot less faf than that pump sprayer. Do a whole car with that and you’ll have arms like Arnie. Asta la vista baby 💪

they will most definetly work kenny for sure.. hell yer :)

yer its so foamy when you put it in a foamer its too dry.. But in a lance or normal sprayer its nice... It foams up nicely under contact as well which is cool for brushing out rag tops and stuff.

shes in spain im safe :)

@@forensicunplugged4295 Never imagined she's been watching you on RU-vid? 😁

@@delphinebez3045 you gotta be kidding me, I barely get a "good morning" when shes here nowadays. Im one down from the dog... and we dont even have a dog!

@@ForensicDetailing any wonder, you spend more time with your cameras and products than you do with her 🤣🤣 I'm not criticising btw, I've been living with my missus for 17 years now... That's how I got into detailing 🤣🤣

not much of a squirter though :)

@@mandismith89 😂😂😂👍🏼👍🏼

Just read about Shiney garage citrus oil as never heard of it, says in great for removing layers of wax, that's not good if u don't wanna remove ya wax lol

@@boyasaka i mainly ceramic coat my cars, and in good dillution it doesnt remove waxes and sealants. Same as any other prewash.

doh :)

yer or like white cotten circular swabs is good but its very imformal this Miguel.

1:25 would be 4% pir for the lance.. so that would be 50% product 50% water in the lance thats a lot. Could be a factor. but both products exceeded my expectations the panel was actualy squeeking it was so clean.

I also want to know this

I dont really use surfex this way (dont get me wrong you can but).. BH have a dedicated road film pre wash and I just think this is what you want to use as a pre wash really buddy. Its more rinsable than surfex.

That interesting you say that because the other reviews I've read said to avoid foam lance and use a pump sprayer... ... Good to see a different opinion - what dilution ratio do you use in the foam lance?

@@markkerr3761 well like any pre wash/ snowfoam, you get better dilution ratios in a pump sprayer and basically save money because your using less product. I use it both ways, but it does work very well in a lance, not to thick, not to thin, runs off the car nicely and cleans really well. As regards dilution, i have tried a couple of ratios 10-1, 20-1 both work really well, so i would do either 450ml water to 50ml spritzer or 25ml product to 475ml water, all depends on the level of dirt on the car and if it's protected or not, but still use very little product really, but don't forget using it through a lance will dilute the product further. Through a pump sprayer you would use less, so in a 2 litre sprayer that i have, i use it round 25-1 up to 50-1 still works well even up to 75-1, on the bottle it says lsp safe from 100-1 upwards but don't listen to that, joe (autoglanz boss man) told me it's lsp safe even neat (quality lsp) and told me to play around with the ratios, so obviously yes you get value for money in a pump sprayer, but not as fun as foaming 😀, and also foam helps it not dry as quick aswell and better for working the crevices with a brush also, so foaming does have it's advantages at the expense of using more product. Give it a try through as lance you will be pleasantly suprised, again joe told me in testing that because it did so well through a lance, they decided to add instructions to be used through one. Hope this helps.

thats like an echo of my thoughts. but I think I prefer spritzer..

Where about are you from Zain by the way?

@@forensicunplugged4295 I'm in North London. Can't even clean the car this week whilst I'm off due to it raining every day 😩

@@zaink7037 I feel your pain - got a new car 2 weeks ago (well new to me) and can't get outside to even give it a basic clean, driving me nuts!!

you distribute your comments like a cluster bomb dave! :)

do you mean the tests in this video or my up and coming "best snow foam" video test thing? both are true reflections of something because we are sort of using the products to clean things.. so like they have to be a reflection of something right ? I wanted the diluations to be the same for this test so it might allow me to determine which one cleaned better... 1:25 is like 4% pir for sprizter. I think you can use it a lot lower than this. Brute you can use upto 1:10. This might suggest that spritzer is more concentrated or powerfull as it has a lower max ratio. who knows. but literally all these premlinary things are, are a chance for me to eyeball them, I mean you can call it a test perhaps but its like a half asses attempt to eyeball them in use (that never sounds great for the title though :) ) . So when I start the formal testing I have some real world usage to also base my opinion on.

@@forensicunplugged4295 I agree. I was referring to your big test that you're building up to! I suppose really you could look at it as a "pound4pound" champion! Just picked up some autofoam after finishing avalanche, find auto finesse quite expensive. Thanks for the reply. 👍

@@YouOnlyGetToDoItOnce yer so that big test, or any of those comparisons can be a bit to "testy" if you like and "testy" isnt always good. products that have done bad in "testys" Ive gone on to love like Capro Elixir for example.. So yer by doing all this it helps the tests be a bit better.. you literally cannot beat using these products as many times.... even now in winter, that can be a different ball game to doing the "testy" in summer and I might miss something... so yer.. dunno mate we try and do a good job.

@@forensicunplugged4295 you do more than most. I bet we'd do well go find someone who's such an honest product tester with as much insight, who isn't being influenced by big brands to "not say too much". thanks again 👍

amazon search pressure gun extention wand quick release mate.

yer it does this was grey. I just never have time to alter them or change filters... like if I load it up and the foam is crap I just grin and bear it ..... but I think spritzer is mega foamy by nature too dry for this foamer perhaps so it was not just he foamers fault.

I just wanted like to show the difference versus soaking with water. I think its like a better control that leaving dry.

k7 karcher mate ive done a review of it.. its very good.

Autobrite PA lance 1.1 orrafice upgrade dr dirt lance upgrade, in2detailing trigger gun with quick release extrnation bar and white quick release jet nozzle.

not covered in this video mate sorry. PH will be covered in the proper big test. I might be able to do like a wax rate erosion comparison. hmmm :) more work :(

karcher K7 m8 check out the review of it its very powerfull yes.

I came up with the product name "spritzer" for autoglanz about 5 years ago.

its the reigning champion of the first pre wash test.. Ive started the second test now and Ive shot the corrosion testing. but theres about another 5-6 tests to do. (and another couple of months of just using the products on dirty cars like this)

Forensic Unplugged well done. Lots to choose from nowadays. I have been using the Dooka wash Si for prewash and it works well. A great softener before jetting off!

@@DetectoristTom How have you been using it? Through the lance using detergent bottle, or snowfoam bottle, or spray bottle?

Jason Dooka Si? I use it through a 5 litre pump sprayer. I always have the water fairly warm though.

@@forensicunplugged4295 corrosion testing? Do they cause corrosion?

it will screw my thumbnail plans 9 is the cap (imagine 3x3 thumbnail of all the cars being foamed)

Forensic Unplugged Awesome. Got ye!

i th

flex m8

you could say that yer. although it was really a sort of quick eyeball. Hard to really know which cleaned better because both did such a good job but yer.. it was close to squeeky clean on those lower panels. did not expect that..

@@forensicunplugged4295 could be because the lower areas technically get more foam on them due to foam above coming down 👍

@@forensicunplugged4295 Looking back the first was applied 3+ minutes before the second one, and the second got washed off before the first? I would have thought the one that had been on there longer would have done better, but not necessarily. Both incredibly impressive at those dilution ratios

@@matty387 I did lol should have washed the other off (I actually filmed couple of other videos while It was dwelling, too much for my single neuron to cope with :) ). I think though I left them for prolly so long they had both done their thing..

@@forensicunplugged4295 Sorry, I think that came across wrong. I'm not picking holes, just trying to understand how each did what it did. Again, great review showing the benefits of these pre wash products. I'd have never thought they would be so effective at those dilution rates 👌🏼

needs a filter change but yer Im not over whelmed it. I tried the marolex down at UK detailing as was not overly impressed with that either. I like the bigger pump sprayers (more than pump foamers) I think the small ones perhaps are all gonna be too much rumpy pumpy. not sure don, might do like the bike pump hack and see if that makes it better.

Actually no. It is worse than most Americans.

bout a year old daz.. just little backup channel for potatoe cam low budget productions

virtually all panels have laquer peel. doing a safe wash on a car that needs a full respray is pointless. its already covered in swirls.