Just want to let you know… I was at wits end on a new to me 20 year old Fisher that was only used a couple times. All wiring on truck was new and tested. Nothing but clicking when I tried it. Had voltage to motor and good ground. Was about to go buy a new motor as I figured it was seized. Found your video. Removed cap. Cleaned armature with some emery and spray cleaner , removed loose rust, greased bearing. Works like new! 👍
You need to change out the bushing in side your cap, it’s worn on one side. What happens is the armature-(rotor) will start to rub on the field- (stator) and it will short out. It will have a hard time rotating at first and then it just won’t work. The cool thing is the bushing is about $2 and one changed it’s like brand new.
Great video!! I been trying to find videos on this type of pump and motor, and most videos guys either talk slow as if they have learning defects, or they act as if they're having a conversation with you and they can cut their videos down 15 minutes if they just got to the point like you did! I'm going to look for your other videos cuz I'm looking to see how to properly change the oil in this thing, because this is my first minute Mount Plow! Most my trucks were always 80s and had hydraulic fisher plows, which I believe are way better Denny's electric over hydraulic minute mount craps! But unfortunately today's trucks don't leave too much room 4 hydraulic pumps, and the valve body with cables! So I'm stuck with what I got! But I love your video it's concise, to the point, your camera is right on what we need to see unlike the last video I watched where the guy must have had a GoPro on his head and the video was about two inches above what he was doing! I'm subscribing, because you just put out a short and sweet and to the point excellent video! Thank you
Ok! I thought u said in this video that you had other related to this plow, but I just looked and couldn't find any. If u can send me the links to them, I will be grateful! Thank you!!
