Тёмный
No video :(

Snowblower Recoil Starter Spring Replacement On Tecumseh LCT Engines With Donyboy73 

donyboy73
Подписаться 399 тыс.
Просмотров 36 тыс.
50% 1

Snowblower Recoil Starter Spring Replacement On Tecumseh LCT Engines With Donyboy73
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a coffee!!
/ donyboy73
Watch my video on how to replace the pull cord on this recoil here;
• Snowblower Starter Rop...
Watch my video on how to remove seized shear pins from your snowblower here;
• How To Remove Seized S...
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #tecumseh #snowblower

Опубликовано:

 

25 янв 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@donyboy73
@donyboy73 Год назад
Watch my video on how to replace the pull cord on this recoil here; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2Yg4hUunhWs.html
@kevinchadwick1206
@kevinchadwick1206 6 месяцев назад
Hi Donyboy, I have been following your channel for many years. Your videos and instructions are quite simply the best. On the Tecumseh starter you must have saved me about two hours work when I understood how the recoil starter was designed and built. Your channel is worth its weight in gold. Thank you and may your business prosper even more!
@joemcgeough1616
@joemcgeough1616 Год назад
Another excellent video. Clear instruction, no annoying gimmicks or music. Thanks.
@100vg
@100vg Год назад
Always such great tips and tutorial procedures. You're the man. Thanks, Don!
@CFProton
@CFProton Год назад
Another professional installation of what you would think was a simple recoil system (anything but)! Thanks for taking your time Dony.
@Ckktopa
@Ckktopa Год назад
Love your longer videos...thankyou!
@elcheapo5302
@elcheapo5302 Год назад
You can skip the plastic melting process by just winding the spring fully tight then backing off until the rope hole in the sheave matches up with the rope hole in the housing. I like to get it there by backing off at least 1 full turn. That's was how I was taught at Tecumseh school back in the 90s.
@REVNUMANEWBERN
@REVNUMANEWBERN Год назад
ALWAYS, Sweet, short and FULL of DETAILS
@Mudcat597
@Mudcat597 Год назад
Thank you for the great demonstration! 👍
@nova481
@nova481 Год назад
Another great video with precise detail. Thank you Don.😀
@johnshinski2994
@johnshinski2994 Год назад
Your videos are top notch Don. Thanks
@watermanone7567
@watermanone7567 Год назад
Excellent repair video. Thanks
@josephrich6014
@josephrich6014 Год назад
As always, very helpful step by step. Excellent tutorial. Thank you.
@ecttreker9816
@ecttreker9816 Год назад
As always, a very thorough explanation, easy to understand.👍👍
@adnacraigo6590
@adnacraigo6590 Год назад
You are an easy to understand, great teacher. Thanks.
@dp4867
@dp4867 Год назад
As always great job Dony👍
@knighthawk86855
@knighthawk86855 Год назад
Excellent job, and great editing as always.
@deanmoore420
@deanmoore420 Год назад
Nice job nice tip enjoying watching your videos 👍
@Willy7212
@Willy7212 Год назад
Thank you very much. Your videos are so informative.
@fixit4182
@fixit4182 Год назад
Good step-by-step procedure definitely want to keep. Thanks, Dani.
@barrypettit3668
@barrypettit3668 Год назад
Another excellent repair video, didn't know the recoils were this involved. Will book mark this for future reference, thanks Don.
@daveryder8275
@daveryder8275 5 дней назад
Great work donyboy , thanks
@darrellbarker6704
@darrellbarker6704 Год назад
I always enjoy watching your videos. Informative. The way you talk is great. I have learned alot from your knowledge.
@mike423439
@mike423439 Год назад
Still the master instructor. 🙌 Excellent step by step instruction with key objectives and pitfalls clearly articulated.
@tomfillmore9710
@tomfillmore9710 Год назад
Great video good advice thanks for sharing take care
@ronwatson4902
@ronwatson4902 Год назад
Great video!.A bit involved but I think I can do it.Thank you very much and have a great weekend.
@jameslester3861
@jameslester3861 Год назад
This is the best tutorial I have been able to find on repairing a brokenTecumseh recoil spring. Thanks so much for posting it. Yesterday I went to replace the rope on my tiller and the spring would not tighten. Really did not want to have to replace the entire assembly. The engine is a H-50 from around 1992.
@royvaldez2393
@royvaldez2393 Год назад
Thank you very much 😊. The Best information like always.
@carlmiller1034
@carlmiller1034 Год назад
Excellent step-by-step repair video on the Don. Thanks for making. Awesome video footage and close-ups. Your videos are always top notch (I tend to take that for granted with your channel). I will definitely file this video away, in case I ever need to perform myself. I love working on Tecumseh. Thanks again, and have a great upcoming weekend.
@donyboy73
@donyboy73 Год назад
thanks Carl!
@patrickpoulard24
@patrickpoulard24 Год назад
I have a Tecumseh engine and I have that same type of recoil. A couple of years ago, I had to do the same exact repair on my recoil and it was a great success, thanks to some of your older videos. 😊👍🏿Keep up the good work Donny
@roberthamilton9123
@roberthamilton9123 Год назад
hi 👋 Don thanks 🙏 for sharing sir very informative & straight to the point bud 👍👍 smaller parts are easy to loose & to break job well done 👍 sir 😀😀😀
@JCTyler64
@JCTyler64 Год назад
Thanks Donny!
@dennisryan7568
@dennisryan7568 6 месяцев назад
Exceptional Video!!! Just what I needed - thanks so much for taking the time to make it!!!!
@donyboy73
@donyboy73 6 месяцев назад
Glad it was helpful!
@macoombi
@macoombi Год назад
This video helped me out today. Replaced my pull cord on my Husqvarna snowblower with a Briggs engine. Also swapped the carb out and it's like a new machine now. Thanks!
@gregwells2331
@gregwells2331 Год назад
top notch video Don!!
@kjell-richardlvdal373
@kjell-richardlvdal373 Год назад
Another excellent video
@stephenzies8867
@stephenzies8867 Год назад
Don You Are Awesome
@brucekivi
@brucekivi Год назад
Thanks! You always have good videos, very informative. I had an old Tecumseh like that. The blower housing finally rusted all to pieces and I gave up on it. The engine was still good though, but some little problems like the recoil was bad and the carburetor would leak sometimes. Good machine for many years though.
@nbpt1000
@nbpt1000 Год назад
As options to a heated up screw driver to make the notch in the plastic you can use a round file and file away. Or a Dremmel tool with an appropriate cutting tool. Good video. Very informative.
@Spencer1609751
@Spencer1609751 Год назад
Thank You!
@josephgriskauskas9639
@josephgriskauskas9639 Год назад
Thanks again
@baddad5781
@baddad5781 Год назад
Another great informative video Don thank you. I don't know if others would be interested but personally I'd like you to make a bio video telling us how you got started in small engine repair and how you acquired all the knowledge you have. Thanks again
@martyleary4131
@martyleary4131 Год назад
You are just amazing!
@MsMatamor
@MsMatamor Год назад
Merci Don From Québec City.
@rickthelian2215
@rickthelian2215 Год назад
Very well explained 😀🇦🇺
@m9ovich785
@m9ovich785 Год назад
Thanks Dony. The fastest fix I found for these is to get ride of any Tecumseh engine I came across HAHAHAHAHAHA...
@Xzavieur
@Xzavieur Год назад
Nice video. I like to use my small rotary tool( dremel to most) and either a cutting disc or drill bit to make that hole for the rope. Quick and easy
@donyboy73
@donyboy73 Год назад
that's a good tip!
@boblemon2103
@boblemon2103 Год назад
Wow, fixed my limp cord! Melted a notch and just put another turn on it. Pulled it three times and the cord snapped where it had been dangling for the past 5 years, lol, of course. Oh well at least I had extra cord around to just replace it.
@REVNUMANEWBERN
@REVNUMANEWBERN Год назад
ALWAYS get's a thumbs up
@harrygrimley4352
@harrygrimley4352 Год назад
Thanks for sharing this with us. I just tried to replace my rope and the spring came undone. So punched out the center and cut an inch off the spring reassembled and it must be to tight the arms won't grab. Bummer. Have to try again another day.
@bashirkakar9775
@bashirkakar9775 Год назад
Thank you for very good explanation and where are you located.?
@73superglide62
@73superglide62 Год назад
I dont recall have problem with theses .actually I like theses type
@jims5630
@jims5630 Год назад
Hi Donny, I have a 250’ gravel driveway and we get a foot plus of new snow a few times a year…. What would be a good used snow blower for these condition? I saw your blower video a few weeks ago, I believe it was an Arien? Like your videos, fixed a few Stihl chainsaws with your help! Thank you
@rightlanehog3151
@rightlanehog3151 Год назад
With the electric starter not working on my Tecumseh powered snowblower, I recoil in horror at the thought of my starter spring breaking 😉
@Patrick4959
@Patrick4959 Год назад
Awesome stuff Donny mate cheers from Australia 🐨 🐑 🌏 or the land down under to your area in Canada 🍁 and will the same parts work on a Honda lawn mower recoil spring type too ?
@tazmun
@tazmun Год назад
The first thing I want to say is there's nothing wrong with doing it the way he's offering here. In fact there's probably a lot more satisfaction involved. However years ago they wouldn't allow us to change the parts on a recoil that was externally mounted like this. It was just company policy and since the parts are almost expensive as a new one depending on your labor calculation plus fewer call backs the mold is set. If you have a one hour min labor rate price should be the same either way. We kept a lot of these on the truck so it was a quick fix.
@steveharleyfan
@steveharleyfan Год назад
Nice video Don. But I'd be worried the WD40 rinses off the white grease.
@valeriomarino691
@valeriomarino691 9 месяцев назад
Where can you buy the 2 metal hooks?
@mikepizel1922
@mikepizel1922 Год назад
I purchased a machine with the recoil assembly apart and no paws, do you have a part number for them. Just like you used in this video. Thanks
@IGoProEVERYTHING
@IGoProEVERYTHING 4 месяца назад
How do you replace the rope on the original reel?
@Pete.Ty1
@Pete.Ty1 Год назад
👍👍👍..
@woodenbeast9337
@woodenbeast9337 Год назад
Please do a convert 3X to 2X Cub Cadet video
@franklipski2438
@franklipski2438 Год назад
Have an old Troy bilt Horse tiller with a Kohler K161T engine. The recoil starter is shot. Insides broken and only 1 dawg left. I am unable to find a replacement. Is the another brand that may work on this tiller?
@philliphall5198
@philliphall5198 Год назад
Where do you buy the most parts from ????
@dejanlalosevic8058
@dejanlalosevic8058 Год назад
Respect, what do you think about the device Stihl ms 310 for some basic work, not now the type of demolition of thick wood and professional work in the forest, but occasional work Thank you
@dejanlalosevic8058
@dejanlalosevic8058 Год назад
Greetings from Serbia
@nelsondasilva667
@nelsondasilva667 Год назад
Quick q would a extra turn make the spring pop out if u pull too much when starting? I’m having trouble spring is fine but when trying to start spring fails till I take apart then works fine until I hook up and than doesn’t retract
@donyboy73
@donyboy73 Год назад
yes the spring will keep popping out and won't retrack
@canoenut
@canoenut Год назад
Fantastic advice and how-to! Just found your channel. Looking for a snowblower that I can depend on for reliability and replacement parts when needed. I live near Montréal and need a 24" 2 stage gas machine. Any suggestions?
@donyboy73
@donyboy73 Год назад
toro, ariens or cub cadet
@donitferguz6577
@donitferguz6577 Год назад
@@donyboy73 podadora craftzman 3.5hp escupe lumbre por escape mofle
@Monza62000
@Monza62000 Год назад
just did one tue spring was jammed but not broke .....but it is very cheap made...
@LGB120
@LGB120 Год назад
Hey donyboy73
@donyboy73
@donyboy73 Год назад
have a good weekend!
@philliphall5198
@philliphall5198 Год назад
I’m shocked at the price of the spring now, just wondering why ??? I started reworking the latch end most of the time because of spring prices
@johnw1178
@johnw1178 Год назад
Don, I love you channel and also follow Steve’s Small engine Saloon. I absolutely hate Payton. You may want to consider following Steve as I was able to send a one time payment to him through PayPal. If there is a way to send a one time payment through Patron please let me know?
@donyboy73
@donyboy73 Год назад
thanks John, the link is in video description and also on my channel page
@blakethiel5331
@blakethiel5331 4 месяца назад
Mine looks nothing like that!!
@thenewhumandesign
@thenewhumandesign Год назад
Kind of obnoxious you can just swap out the recoil spring.
@glennlurman3514
@glennlurman3514 Год назад
Wastage in action. Rather that replace a spring you have to buy complete assy. trimmers clutch housing does a bearing again buy a new assy. There will be no mechanics in the future just part swappers being told what to change and how to change it by software. Wish sometimes that an Asteroid will smack into this planet and reset us for a bit.
@GypsyHunter232UK
@GypsyHunter232UK Год назад
We thought u was gonna replace the actual spring coil..notjust a spring cartridge
Далее
REWIND YOUR RECOIL SPRINGS THE EASY WAY!
3:10
Просмотров 65 тыс.
🛑 до конца!
00:12
Просмотров 26 тыс.
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
How to Replace a Snowblower Pull Cord Starter
12:22
Просмотров 67 тыс.
HOW TO Grease Snowblower Augers With Or Without Zerks!
13:37
FIXING A Snowblower That Surges With Donyboy73
9:00
Просмотров 93 тыс.