I have a 3000 psi 5.5 gpm Pressure Washer, using NO proportioners and straight SH from a 5 gal bucket… what would be my draw percentages using 12.5% SH and 10% SH?
I've added as much as 150 ft of hose to the m5 and have no trouble getting it to feed SH through. They are expensive but worth it until someone comes up with something better. Thank you John Doherty LykeNew power wash Salina Kansas
Bought one of these X-Jet M5s a few days ago and used it for the first time yesterday. Got to say it is well worth the money. highpressurecleaninggoldcoast.com
I just got an XJet M5 and the little coloured proportioners do not fit inside the barbed end (the barb is too big) but they fit snugly inside the quick-release male connection
I have a 4000psi 4gpm pressure washer and looking to get a sh ratio of close to 1% out of xjet. Do u fill up the bucket with just sh and put correct proportioned on xjet to get my 1%
Hello. Thanks for the video. Question about the proportioners & diluting your mix... I am extremely confused on this. Say I have a house washing mix of 2 gallons of 12.5% SH + 3 gallons of water (in a 5 gallon bucket). The proportioner will determine how much of my 5 gallon mix (3 gallon SH + 2 gallons water) is actually being sprayed onto my surface I am trying to clean? I really don’t get the proportioner part. If you could take the time to explain that a little more in depth for a noob like myself I’d appreciate it. Edit: Are the proportioners only used when you have straight (non-diluted) 12.5% bleach in a 5 gallon bucket. As in 5 gallons of 12.5% SH in a 5 gallon bucket. I’m not sure why you’d use the proportioners if your mix is already diluted with water? Ex. 2 gallons SH/3 gallons water in a 5 gallon bucket.
I’m a total noob too so I appreciate any information. About to get a business going and very excited. I’ve been trying to decide wether I should get a $600 12v setup or just DS with the xjet and 5 gallon bucket. Why do people choose the 12v setup? Is it the bucket?
I recently purchased an X-Jet M5 and I am having trouble with it being loose on the end of my lance. It spins around very easily. Also I don't think that It is shooting as high as I expected it to. I have the blue and pink 2 story tips that seem to reach higher. Can you tell me what I should do about these issues. And yes I ordered the correct size as I have a 3100 Hp pressure washer. I do love the fact that I am not down loading and I can adjust the chemicals.