No video :(

Solder Like A Pro - Aoyue Solder Station, Supplies & Tools For Soldering - Holmes Hobbies

Подписаться 50 тыс.

Просмотров 17 тыс.

50% 1

You can find this kit at our affiliate link! bit.ly/3esOT0k or sra-solder.com...
A lot of soldering happens at Holmes Hobbies, we mean A LOT! Because of that John knows quite a bit about soldering and got some new gear in that he wants to share with you. In this video, he is going to talk about a new solder station that arrived from Aoyue along with a bunch of tools and accessories you'll want to check out if you're interested in equipment that will result in pro level soldering for motors, speed controls, batteries and more.
SRA Soldering Guide- bit.ly/3d9tkS7
For Rebuilding Service Visit: holmeshobbies....
FOLLOW HOLMES HOBBIES:
RU-vid: / holmeshobbies
Website: HolmesHobbies....

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@HolmesHobbies 3 года назад

Find this soldering station here and support the channel! bit.ly/3esOT0k or sra-solder.com/rc-vehicle-soldering-kit?affiliate_code=F0En957ZXa&referring_service=link

@hillie47 3 года назад

"Let's see how loud it is", followed by a concerned face, from the man that brought us the whining outrunner revolver motors. :)

@rc-daily 3 года назад

My wife solders parts for the government and she always gives me a hard time. She has brought me aot of nice products that she uses at work. Like the solder, flux, thinning cans, brass wool stuff all has expiration dates lol. So when it goes out she will bring it to me. The solder I use is super tiny. I'm not even sure what diameter it is. Maybe a few human hairs wide? Lol but she solders some parts looking through a microscope! This looks like a super nice kit though!

@joshlvn7732 3 года назад

Just call it Oi , that name is hard to process I kept mumbling it every time you did and I just came to the conclusion that Oi seems perfect! 😂😂😂

@ryurc3033 3 года назад

Nice equipment, thank you for the info. I prefer the pinchiedoo. Terrance head cracked me up. On a more serious note I have had meta shards in my eye. That was scary as hell when they took what looked like a dremel to my eye while I looked straight at it. Definitely WEAR YOUR SAFETY GLASSES.

@ryurc3033 3 года назад

Metal.....ugh proofread your crap people

@Legoman585 3 года назад

I love soldering, done it all my life for a job, it's still very satisfying watching a very old blob of solder come back to life.

@johnwoods2035 3 года назад

I thought I was the worst solder guy ever. Ha. I'm a sheetmetal worker by trade and solder the ends on standing seam copper roofing. So I got a hold of big jar of flux paste. And yes it has acid in it. I've got a 930°f solder iron and half the time my joints look like hell. So I have some good solder juice now and I feel like a pro. Thank my brother.

@KnightenDaise 2 года назад

Dude..... You're the man. I have watched countless soldering videos and not one has given me any information. This is by FAR the best soldering video ever. THANK YOU!!!! Signed: The guy with a horseshoe shaped chisel tip. 🤦🏼‍♂️

@HolmesHobbies 2 года назад

What was especially useful information for you?

@KnightenDaise 2 года назад

@@HolmesHobbies Definitely the screwdriver techniques. 😂 Seriously though, the info on the various fluxes was amazing, as was the info on tinning and why I've always wound up with trashed tips. Plus, I now know exactly what I did wrong years ago on my Vaterra Halix and why, right on schedule with what you said, all the connections went to hell on both my battery and ESC leads. Acid flux. Absolutely exactly as you said. Lol. I love that kit and am very strongly considering picking it up. The only part I wasn't in love with was the crappy-crap Helping Hands unit. There are so many better options out there, that baby would be in the trash without even being unboxed. Lol. Also loved the info on the various types of solder, using a little fresh solder for thermal transfer, the existence of the solder sucker, and really the entire video. Much and many thanks, man. Much and many.

@74DuallyVan 2 года назад

I didn't flick any solder in my face but I did have a close call where the helping hand let go. But I definitely wear glasses now!

@grumpyyerr 3 года назад

Honestly I don’t find changing temps on my Hakko that bad. Had mine for 4 years and it’s mostly used for heavy solder jobs. Not ver often do I change the temp from about 825. That fan does look interesting and I may have to grab one. Thanks for another entertaining yet educational vid sir

@cameracorpus 3 года назад

I've used their analog version forever. I'm on my third one. You've just convinced me to redirect my choice a bit higher.

@davidbanaszak562 3 года назад

Looks great! Id buy that kit myself.. great that you put out the info. I didnt know what to use for professional results..

@emory442 3 года назад

When I was taught soldering in the USAF, they never told us about not putting solder to the tip. I recently killed the tip on my Trak Power 950. At least now I won't do it again. I've been using those Helping Hands for decades. But I get them from Big Lots for $4.

@HolmesHobbies 3 года назад

Leaded solder, doesn't pit the tip as much

@fpvrcstuff 3 года назад

NEVER solder without shoes on . I had solder drip off a part and it hit my socks and went straight through the sock and stuck on my foot It hurt like hell. Never had it in the face though.

@adammcphee5759 2 года назад

Great video I’m just getting into a first soldering project on my trx-4. When I worked on transport trucks we would mix baking soda and water and dip the corroded wire in it then it comes clean with a wire brush fairly easy. Quick tip for your truck cable ya did, thought I’d pass on! ✌️

@EmMaMasRCs 3 года назад

A timely post as we are currently searching the market for some of these items. All that tip talk John , phew 😌hahaha. 🙋‍♀️why are your pants undone? 😆 I hope the items have a similar effect on my husbands pants 🤞

@shafiqjan1474 3 года назад

Hey guys, I got mine at a store called microcenter. Easy and they have a bunch of other useful things too.

@nukedathlonman 3 года назад

Couldn't agree more on the soldering iron & the helping hands.

@Livlifetaistdeth 3 года назад

Glad you made it safely into work.

@crazylarryjr 3 года назад

I don't know what flux I used, but i always used solid solder to prevent that degradation. never has issues. all my stuff, except the soldering iron, were form radio shack. Yup cheap stuff, but used right I never had an issue with lack of tinning or cold joints. I learned how to solder from some old slot car gurus and the tips apply to everything I've ever soldered Never had solder flicked into my face, but had it flick over the edge of the table and hit my bare feet, also not recommended

@astridsactionrc545 3 года назад

This certainly looks like the setup I need. The only thing that I own is a Weller 25 watt iron. 😢

@ryurc3033 3 года назад

Your trying buddy, thats what matters. Like he said on preheating, it can help alot when your running underpowered. We all have

@KTMcaptain 3 года назад

honestly, I use a $20 amazon iron that's quite crappy. But it works. Jigs and helping hands are what are really important. Pre tin ing the connector and leads... I've used it to remove 6.5mm bullets and put on 4mm ones, and have also had to put fresh 6.5 bullets on a motor that came without connectors (looking at you TP Power!). If I soldered more than three times a year, then I'd invest into something that could maintain heat better... but it's never let me down per se.

@jdsrcs8061 3 года назад

Very cool. Soldering is my nemesis!!!!🤣🤣🤣🤣

@mikeshobbiesandrandomstuff 2 года назад

I definitely want the exhaust fan with hose

@wesleemiller 3 года назад

Great video.

@timvanasen6711 3 года назад

Great review John I have a Aoyue 939D+ and I enjoy soldering with this set up I paid like $45 for the staion, the temp change is pretty fast tho I'm mostly around 380° really like the bigger chisel tip, yes I've been face assulted by flying solder saftey glasses are a must 😎👍

@SlooDon 3 года назад

Thanks for the review. Yes would like to see the review of the budget for us occasional builders.

@Braindog 3 года назад

I came from FPV Drones to Crawler and since i have a TS100 for my Drones i never used any Base again. It has a Display in the Handle and i can use it everywhere with a 4 or 6s Lipo ;) Give it a try^^

@HolmesHobbies 3 года назад

Already shot the vid, lol! It's a nice iron for small work but was sorely underpowered for doing motor wires.

@nighthawkj30A4 3 года назад

I just bought a Weller soldering station 🚉

@TRKISH324 3 года назад

Offfff course John F'n Holmes has a monster driver for screwin'

@amoscardoza5253 3 года назад

Hello Holmes! Just found your channel and im excited to learn. My son and I are just getting into the RC world, so being "Noobs" ( as my boy calls it) where are researching all we can. Looking forward to your content! Thanks bro

@bakko9302 3 года назад

Use a southern accent and it will sound like "I-owe-you" XD

@Flannery164 2 года назад

Ok Mr. Holmes, I have an element front runner 4 runner that I bought for my son for xmas. I purchased 3 of your motors after reading that the smaller the turn the faster the rc goes. So I figured I would buy the Crawl master sport 550 8T. the 13T and the trail master 550 21T. well none of them made the 4 runner any faster. Can you steer me towards what gearing i need to be about as fast as my Trax bronco 2021 plz. not looking for speed demon just enough to be "fun" when he wants. lol

@HolmesHobbies 2 года назад

Is the traxxas a two speed?

@hillie47 3 года назад

The wire on the "wand"/tip/whatever doesn't look like the nice flexible silicon wire.

@imobilemedics 3 года назад

have you seen the micro hot tweezers for SMD components that goes with this station? i would love a review of it if you could..

@themountain59 3 года назад

Sweet setup....but the most useful tool is the M3 hex screwdriver ;)

@robbibun 3 года назад

The link doesn't work for sra kit. It goes to there website but says page not found

@HolmesHobbies 3 года назад

This one work? bit.ly/3esOT0k

@TheMegaChuckles 3 года назад

@holmeshobbies great video, unrelated? What is the rig 2 to the left of the Wraith1.9?

@dannygonzalez0861 3 года назад

Love my Hakko 888. Hate when the solder flings off and falls into my sock 😢 lol

@errc2610 3 года назад

So I was just trying to order soldering rosin Flux online and this pops up 😳

@V8S4panzer 3 года назад

Thank you I’m in the market for a new iron since mine broke

@odomandr 3 года назад

I have had an aoyue for about 5 years or so now. It is a great iron heats up fast and I had found a chart to references for each setting and it's relative temperature. The only draw back is it did come with a corrosion sponge to clean the tip...... May be time to order new tips and some of that tinning prep

@ashleyconnelley556 3 года назад

I gotta have one

@PopExpo 2 года назад

The 2mm hex driver.

@trevorwhalen8659 3 года назад

Solder king holmes! Love this video

@RCRitterFPV 3 года назад

Do you do any FPV soldering ? O_O I had to get magnifying glass with light to see what i'm doing. then I tried using that tiny pointed tip you use for flight controllers to solder one of your motors.... 3 hours later... the right tip for the job is everything. don't be afraid to get a good look at your results, iphone camera or magnifying glass... good stuff, thanks for sharing. ohh I should get one of those smoke eaters... I use my house fan aim it my direction... but that is kinda annoying

@HolmesHobbies 3 года назад

Just smd work , I don't play with quads much.

@motorbreathjz 2 года назад

i get confused when you say tinning.. it made sense when you mentioned solder but how does the brass cleanser tin your tip?

@HolmesHobbies 2 года назад

Solder gets built up on it and it keeps the tip tinned better than a sponge

@motorbreathjz 2 года назад

@@HolmesHobbies right.. the brass sponge cleans the tip.. but i see you putting solder on the tip to also referring to "tin" that is essentially cleaning the tip also? sorry man my brain is one of those special ones.

@mbarton98 3 года назад

Is 376C low temp? That is 708.8F. I appreciate the soldering tips and have some new wishlist items, thanks!

@HolmesHobbies 3 года назад

Ehhh, not as low as it could be for the work but also not so hot the tip gets immediately screwed up. 300 to 400 is where I normally work with lead free.

@chrisstevensrcadventures9017 3 года назад

Who won the motor?

@tylerswank2805 3 года назад

Thanks for the video

@MauzyrockRC 3 года назад

We call any metal wool a Curly kate

@insanemadmanroom2299 3 года назад

I got a $30 soldering pen doesn't have that big old station nothing you got to carry around you just plug it in and you're good to go and it has over 60 watts of power I can go up to 460 degrees

@joshlvn7732 3 года назад

How many tips could a tin tip tin if a tin could tip tin! 🤪

@chadlunsford6730 3 года назад

I'm a left handed pool player and I hold it depending on where the que ball is sitting. I don't mind if anyone uses my pool stick but most people don't because it's a short stick muahahaha

@justinferrill8583 3 года назад

A oooooo eh!!!! If someone said that in the town I’m from I would think they said “Hey!! You ate?” Southern Mississippi slang

@EugeneRCDrezgalovo48rus 3 года назад

Super like 👍👍👍🇷🇺

@philfernandez6306 3 года назад

getting one soon.... do you happen to have a discount code ?.... that would be sweet.

@HolmesHobbies 3 года назад

They created a product bundle for us! sra-solder.com/rc-vehicle-soldering-kit?affiliate_code=F0En957ZXa&referring_service=link

@HolmesHobbies 3 года назад

looks like the bundle knocks 10 to 15% off the items, thats nice!

@paulclancy2404 3 года назад

Thats why gun has crater lol, I thought supposed tin tip of the gun each time we solder , ahh using cheap standard solder gun cant even change the tips

@markvasseur961 3 года назад

What's the total cost of all the supplies on the bench?

@paulclancy2404 3 года назад

Alot lol.

@SRASolderLab 3 года назад

Around $210 for everything shown in the video.

@paulclancy2404 3 года назад

Not bad , get all at once be done.

@markvasseur961 3 года назад

@@SRASolderLab not bad for what was shown. Recently lost my solding station and I am in need of a new set up.

@lennythedog6544 3 года назад

First? For the algorithm of course

@martinsuro3990 3 года назад

Metcal or OKI, get tips that can handle 700, buy once for life, this is a rtr solder iron, works well enough to do the job. I wont use it to solder up my premium Holmes Hobbies motors!!!

@nobodyanymore5299 3 года назад

Wife asked if I unbutton my pants as well while I solder. I advised her that it was only a J Holmes thing.

@lennythedog6544 3 года назад

Fourth?

@LowGainElectronics 3 года назад

Hakko FX-888 All. Day. Long.

@LowGainElectronics 3 года назад

Been using Hakko since 1999

@lennythedog6544 3 года назад

Second?

@lennythedog6544 3 года назад

Third?

@ashleyconnelley556 3 года назад

That’s a fact lol

@nicholasbarber4193 3 года назад

So many inuendos!!! Bahahahaha!

@KTMcaptain 3 года назад

Solder? No, I twist the wires, spit on them, and then spray them with plastidip so they don't short. Don't even need to plug in the batteries! My stuff runs on hopes and dreams!

@lennythedog6544 3 года назад

Fifth?

@lightracer8632 3 года назад

Those helping hands are absolute garbage. Horrible to adjust and balance. Just spend the extra money for the magnetic base style all over Amazon.

@alyosha_karamazov 2 года назад

I own a restaurant. If I send you box of food would you do a thirty-minute show/commercial describing everything at least twice. Compelling content. My only criticism, maybe next time spend more time test soldering and more time explaining how acids seem to affect stuff.