No video :(

SolidWorks FL Tutorial

Подписаться 338 тыс.

Просмотров 709 тыс.

50% 1

sw-tc.net/#282 solidworks tutorial complete PC fan with flow simulation, info at start shows tutorial sections. Flex feature may make the propeller more flexible to generate many flow cases to study. Don't forget to subscribe if liked the video for more advanced tutorials.
Used Coil tutorial l: • SolidWorks Tutorial #2...
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 178

@theonolaivar2840 5 лет назад

This 2 hour tutorial on a fan ended up in my recommended. Great!

@TheOnlyRaceEngineer 5 лет назад

Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot

@pradeepr95 4 года назад

Whats that Baloch in yua name.

@designwarp9117 2 года назад

Best Solidworks tutorials on the internet. Good music too.

@HamadBuhamad 7 лет назад

Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need . Thank you again :)

@Specialeffecks 5 месяцев назад

I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation. I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable). As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation). This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade. Now I know how to best mount my contact spokes for my Rotary Spark Gap!

@suhailp4855 6 лет назад

please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration

@juanpablozam5277 5 лет назад

SolidWorks Tutorial #262 : Rotor (coil wiring) 1:22:46 link : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WbdnxArZQ3g.html

@ArtsFracture1.0 4 года назад

Thanks men. I was scared.

@arjunkapadia1712 2 года назад

Hey man will i make full motor or only rotor coil wiring made seperately?

@vithlanibhargav9643 7 лет назад

sirji great work please do upload this type of videos more frequently, thank you for sharing great knowledge.

@ronenyudzinsky838 5 лет назад

You forgot to make the inside wall of the fan blade a rigid wall as well

@lolTeos 7 лет назад

Amazing work, by the way, I was wondering if you have some tutorials related to CATIA's simulations? They will help me a lot

@yuanruiwang6635 4 года назад

Thank you sooooo much for this awesome flow simulation tutorial!!!!!!!!!

@MJ46.91 7 лет назад

THANK YOU SO VERY MUCH FOR SHARING THIS EXPERIENCE WITH US, AND WISH TO SEE MORE

@baronbarbaron 5 лет назад

That is awesome video. It helped me a lot, to figure out how to do some operations.

@spacewalker_98 Год назад

Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming

@abdullahyurtoglu 5 лет назад

A Question: Could you calculate the applied force on the fan blade's shaft?

@Gillambryce 4 года назад

Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!

@leolopezc15 3 года назад

@@Gillambryce Excuse me. Have you done the tutorial? Could you help me to solve some troubles?

@Gillambryce 3 года назад

@@leolopezc15 if you're asking if I can help you with cad software or simulations like these, no. I'm more of a technical guy

@londonnight937 3 года назад

@@Gillambryce I think they wanted axial force not radial force.

@Gillambryce 3 года назад

@@londonnight937 you know what I think you're probably right

@astorimarco2211 10 месяцев назад

Thanks for the excellent video, very informative. I ask you a courtesy, can you tell me which band is playing the background music? Thank you.

@miguelangelmontaohuerta5021 Месяц назад

It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?

@lucascasavalle 3 года назад

Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!

@stormy8815 2 года назад

I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?

@priteshrajput9778 7 лет назад

carry on your work.... and very very thanks for sharing this knowledgeable videos...☺

@bidonpomoew6536 5 лет назад

How to simulate a waterwheel rotation without prescribing it's rotational speed? Like let it start moving due to river flow. Thanks.

@TheJosephStalin420 5 лет назад

What are the specifications of your Computer, sir?

@fjexpo 7 лет назад

Thanks for the video. What is the appearance you apply for each part?

@michapoterek2034 3 года назад

Cool. You did amayzing work. Thank you!

@design-studiotalevski4523 3 года назад

Great video. A bit slow tho, but on point. Good job!

@Obbsnja 5 лет назад

instructions unclear i have a fanblade in my nose

@eshabbatan9411 5 месяцев назад

how did you get that rotating regions

@jhonvargas7904 3 года назад

I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks

@jedidiahsawyer1363 7 лет назад

crazy

@JuanHernandez-yc9bm 7 лет назад

Good job 😀👏

@ramymahmoud376 7 лет назад

good job. Well done

@fendyrony3264 4 года назад

Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.

@eshabbatan9411 5 месяцев назад

but how can you calculate the work done

@edgarcarrillovazquez8576 6 лет назад

I having problems with the CUT-REVOLVER.........what is the distance???

@shafiqulislamsabbir7515 4 года назад

It would be helpful if you provide us the Coil file or make another video for it.

@aeropeoplellc8160 7 лет назад

this needs to have sound with it .. its quite hard to follow the tutorial with audio. Otherwise great tutorial.

@leolopezc15 3 года назад

Good video but, I have a problem with the command Circular pattern in the time 32:18. I do the same procedure but, only the blade appears a a result. How can I get a solution?

@user-zg2kr6ph9z 2 года назад

find any solution for that ?

@leolopezc15 2 года назад

Yes. First, I made the blade as it appears in the video. After, I used the circular pattern command and finally, I made the cylinder.

@user-zg2kr6ph9z 2 года назад

@@leolopezc15 good job figuring a way around it , but i found that you need to do the combine command and then doing the pattern for (body) not (feature), like as in the video.

@leolopezc15 2 года назад

@@user-zg2kr6ph9z Ok That's right. But, what I'm trying to explain there isn't an only way to make the blades. I'm learning Solidworks and there are a variety of commands that surprise me because they facilitate the design and make it faster.

@user-zg2kr6ph9z 2 года назад

@@leolopezc15 you can pattern one entity around it self and create a pattern, its an odd thing to grasp, but it comes in handy when doing such thing as a fan.

@priyamkansal 3 года назад

can you tell me that from where you have taken these dimensions? It's important.

@phuccaoo 5 лет назад

35:52 How do you rotate it like that?

@arjunkapadia1712 2 года назад

It's space mouse. Worth 30,000 ₹ 😅😅

@raulduran3706 4 года назад

great!! excelente muito bom , aprendi muito

@abhijitmall2291 2 года назад

sir at 53:43 all things just messed up... cursor is moving in different direction, process are going in different direction.... i had a very hard time understanding those stages

@dimanok85 2 года назад

Юб

@chrisdrake4692 5 лет назад

Simulation seems wrong. Accelerating air should cause it to exit in a line - not "fan out"

@yugamsinghkushwaha7188 4 года назад

it was very help full, but 1 error is coming when i set boundary layer for simulation it gives error its not a boundary between solid and liquid i tried many different way by selecting rotation rei=gion as face and the frame as face

@sean9267 5 лет назад

Pretty cool how their Solidworks version isn't a buggy pile of garbage. Mine won't even run the simplest load analysis without crashing (High end machine with Xeon processor, 64GB RAM, and Nvidia P4000)

@mohamadikhwan4563 2 года назад

Hello sir, can i know why i cannot change the direction in rotating region even i put negative in the value. Hope you help me. Thank you.

@jtvivojtvivo280 5 лет назад

Thank you

@95Addriliant 3 года назад

on my computer, at the "wizard - Analysis Type" window, the rotation value didn't appear. could you explain why?

@Estebangoku23 2 года назад

Did you solve this problem?

@ivanramirez5335 4 года назад

Hola como cambias la dirección del vector adelante o atrás de los álabes? Cambiando el signo sólo cambia el sentido de giro de los álabes

@sarthakdiddi7662 5 лет назад

Where are the links to videos of Motor, Coil and Ball Bearing ? Can somebody please reply with the links ?

@edgarcarrillovazquez8576 6 лет назад

hey... does anybodu know waht is the coloor or the material for the first piece???

@31rafa 5 лет назад

The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?

5 лет назад

i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.

@John.Doe.2025 5 лет назад

Yes you can, just press Import in 3DS and select polygon quantity.

@samuelevatt124 5 лет назад

Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?

@AdityaSingh-in9lr 3 года назад

Hey getting this error while running the simulation ""Warning! Unable to resolve the local rotating region". Can someone please help me to solve it?

@300ml_brasil 6 лет назад

I'm a German student who isn't interested in becoming an engineer but I have worked with solidworks before and really liked it. Now I would like to use it privately which leads to my question: Is there a way to get a free version that doesn't expire after year?

@y.z.6517 5 лет назад

There are open source CAD softwares. Look for them.

@eshabbatan9411 5 месяцев назад

of course there is ways to get it free but those ways are illegal

@markiiim5188 4 года назад

Wow great video

@harywijaya4590 6 лет назад

Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error) Thank you

@vishalrodrigues3294 2 года назад

Thanks a bunch

@divyamanivannan2650 Год назад

where can i find coil tutorial??

@Dr.pabloschmirtz 5 лет назад

Estoy impresionado, muy bueno!

@leolopezc15 3 года назад

Disculpe, he tratado de seguir el mismo procedimiento pero he tenido algunos tropiezos, ¿ha podido hacerlo?

7 лет назад

good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol

@AC-DC_001 4 года назад

В отличии от симуляции, в реале работает по другому: разряжение происходит на всю длинну лопостей, на некотором расстоянии обнаружилась по диагонали обнаружилась отсутствие обдува от кулера.

@muhammadhassanasghary495 3 года назад

Nice

@yashliefernandes 2 года назад

Why no sound? it will be great if we hear it too

@badreddineezzine1300 Год назад

which version of this solidworks ?????

@canszzz 4 года назад

How did u draw rotor part? helpp

@martinminhhoang8739 3 года назад

Do you have a simulation of a Static Mixer tutorial?

@alisan-school 11 месяцев назад

❤❤❤❤Excellent ❤❤❤❤

@felipepadao275 2 года назад

I'm having an error by trying to make a circular pattern on blades... "merge error" someone knows what could be? I have combined all the parts as well

@user-zg2kr6ph9z 2 года назад

use body not faces & features

@eh_mamas8038 3 года назад

I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏

@chetnaprajapati9483 2 года назад

MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP

@yapbt6579 6 лет назад

What is yourr workstation specification?

@Tony_Pham690 4 года назад

Awesome, dear sir, what are specs of your computer I 'm using Ryzen 7 2700, does it to good for thermal - dynamics analysis.

@Matlockization 5 лет назад

You know from the air flow chart this fan would work better if it was put on backwards.

@jagpreetism 4 года назад

Sir we have same fan You have any idea to repair it

@davidhernan0996 6 лет назад

thank you

@NonCADKeys 4 года назад

Cool. Thanks

@xmenxwk 5 лет назад

34:30 try Shell feature next time

@danielperoni8422 4 года назад

I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.

@NoahSONG 5 лет назад

as far as I want to admit this is nice modeling, the CFD should not have been done this way. The CFD done here is no better than drawing random lines after the fan blades.

@dontsubscribeb6436 5 лет назад

can i do the same on catia?

@DragonWolfHowl 6 лет назад

Hi, what GPU do you have

@xaieuanhhung4249 7 лет назад

thank you !!

@user-zu4lj2es5h 6 лет назад

Can I get the rotor? from 1:22:49

@junjialyu6187 4 года назад

Can you have the link for us to download the file

@edgarcarrillovazquez8576 4 года назад

why i can noy enter your website?

@shubham1e 5 лет назад

running the sim goes to mach speed. Is there any remedy

@shubham1e 5 лет назад

its running perfectly fine but the second run goes like 'check your geometry'

@pradeeppanga6611 6 лет назад

Where can i get all 2D drawings of this Assembly ?

@Erksah68 5 лет назад

Maybe Gosho Aoyama-Sama has some?

@charliesteel8750 Год назад

Yeah but this is simulating the flow when the blades are stationay. Yes it is rotating but that is not what the flow trajectories are illustrating , they are simply showing flow through the blades as stationary

@pedroalexanderhernandezriv2691 3 года назад

solver abnormally terminated solidworks no se por q me sale este error

@user-zg2kr6ph9z 2 года назад

did you fix that ?

@xila8861 6 лет назад

whats the name of this song ?

@romlef526 6 лет назад

Perfect

@ArtsFracture1.0 4 года назад

1:32:44 where can I get this?

@jatanlimbasiya3018 4 года назад

It's Great but PC Fan sucks air from inside and blows it to the outside, you did here that is vice versa.

@luisrios8749 2 года назад

Cuantas piezas tiene?

@nithishrajank9784 3 года назад

Will you give this solidworks file

@viktorbonilla5509 6 лет назад

When I tried to do the simulation, he told me that geometry error ... Why? :(

@JohnDoe-iz3du 6 лет назад

Check rotating region part. I myself experienced the same error and I solved it by adjusting that part's feature. If it is not the case, you may check the other parts as well to see if there is any interference among the parts.

@viktorbonilla5509 6 лет назад

Ok thanks!