SolidWorks Tutorial

Подписаться 339 тыс.

Просмотров 102 тыс.

50% 1

►Engine will be completed on :► • Project 10: V6 Engine
►Pocket MultiTool ALL: ► • Project 9: Pocket Mult...
►Tractor:► • Project7: Tractor
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
----------------------------------------------------------------------------------
All dimensions are in mm/g/s/ISO - Based on true dimensioning!
---------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
---------------------------------------------------------------------------------
The average length of a tutorial is 10 min., if longer, it's divided!
--------------------------------------------------------------------------------
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful!
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketch
- SolidWorks Surface
- SolidWorks Motion
- SolidWorks Weldments
- SolidWorks Mold Design
- SolidWorks Simulation
And MORE
►►►SUBSCRIBE ◄◄◄
----------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
------------------------------------------------------------------------------------
----- ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ -----
------------------------------------------------------------------------------------
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
▬Facebook► / solidworks.tutorial.page
▬Google+:► plus.google.co...
▬Donation :► www.paypal.com...

Опубликовано:

22 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@luluiscar 8 лет назад

This video is not very clear

@yogeshkadam4321 5 лет назад

THE MORE I WATCH YOUR VIDEOS, THE MORE I'M LOSING CONFIDENCE IN SOLIDWORKS.

@bretonkyle 5 лет назад

This is not how a turbo works nor is it a supercharger. This is just a swirly intake tube

@houidimohamedamin4747 7 лет назад

did you change the diameter of the circle in sketch 4,because 63.5 seemed a little too big while in the video it looked smaller.could be imagining things tho.

@ormeal15 6 лет назад

50mm

@SmashingPumpkins87 4 года назад

the boundary boss/base in 4:30 doesn't work in the same way that he does, why? I've tryed to follow each instructions, but I suppose that the conflict concerns the green line of the profile.

@azithral4057 4 года назад

confirm "shell outwards"

@yuhu9386 8 лет назад

seems a lot of critical steps are skipped or some dimensions are given wrong....failed to complete this drawing even though every step is closely followed

@ztruestile8837 6 лет назад

I cant extrude cut through the middle part thing snail end

@tvaliulis 9 лет назад

Everything was fine except last moment big circle but no hole in middle so why there is a small extrude and hole in it could be without a hole as well?

@Eldobaz 9 лет назад

It seems you enabled Realview, what graphic card you use?

@danielbustos7801 8 лет назад

I use nvidia gtx 960. Runs amazingly

@andrekarosso 7 лет назад

Sketch 4, diameter 50mm.

@josezarate6838 4 года назад

Thanks, man. I´s always worried about that measure hahaha

@dragosalexandru6133 4 года назад

Thanks a lot!

@queshito2194 9 лет назад

hey! your videos are awesome!!! but, one question..... how can i choose the material that you use? why you piece shines?? what is the option to choose this material??? please! tellme!

@ziad9156 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xs_YH29ykrU.html that help you pro

@amitjain1491 6 лет назад

Can't apply the third variable fillet

@emrekaya3017 9 лет назад

I can not Planar surface. I get an error warning. Help me please

@danielbustos7801 8 лет назад

he doesnt do it. he presses x

@ahmedelasi6091 9 лет назад

i want to have the dimensions can i ?

@alissonsoares5264 9 лет назад

how to let the piece well??

@LiamO5991 8 лет назад

At 7:30 when you are using the planar surface tool, I'm just getting rebuild error due to 'non planar selection or open section' any suggestions?

@danielbustos7801 8 лет назад

if you look he doesnt check it. he quits the action

@nayanpatel1156 6 лет назад

I pratice to make a air turbo but I applied shell is take 0.5 mm , my require 1.5 mm...what is problem I take 1.5mm??

@nayanpatel1156 6 лет назад

In Creo 4.0

@viewcycleblog5222 4 года назад

dude! this is not how a turbo works, where's the turbine? anyway thanks!

@yyyoniii3245 9 лет назад

at 2:08 it gives me "Cannot make two planar end faces to cap the side sheet"

@qiulinfan2043 9 лет назад

I have the same problem

@oprofiles 8 лет назад

stuck here. :/

@Mariona522 9 лет назад

Hola, tengo una tuberia con el SolidWrorks por la qual pasa aire, i dentro hay una pelota libre. Me gustaría saber como simular el movimiento que hará la pelota en función del fluido que pasa por la tubería Alguien podría ayudarme? muchas gracias Mariona

@urieltapia1684 8 лет назад

nunca hizo un grillete , me gustaria que subiera un video de ese tipo :) saludos,

@bernardocaroli6799 8 лет назад

what happens at 3:25?????

@jossuetmaldonado7753 8 лет назад

jajajajaja

@eslam841 8 лет назад

The triangle intersect with the body

@arwidsson3676 9 лет назад

At 9:30 my SW tell me that he can't make cut-extrude :/

@elmerbalentina5574 8 лет назад

same for me

@Elbenlutscher 8 лет назад

These are two seperate bodies

@oscarabundez9063 4 года назад

The measurements are wrong and not clear

@karlbernhoff1603 5 лет назад

Too call this an Air Turbo is a shame, there is nothing in this that would compress the air. Also you have two solid bodies that can't be combined and there is a wall between the bodies that would stop the airflow.

@ALVAROOgm 6 лет назад

thats not a car turbo...

@beccatidaniele 8 лет назад

WHAT HAPPENS AT 0:17 ???

@sagar.shorts 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M8S95QdIrV8.html 1 bar jrur dekhe is bache ko

@ass-gun1879 7 лет назад

don't make fucking ellipse please !!!!!!!!

@vaypon9721 6 лет назад

This video is terrible.

@TheSamN8 6 лет назад

Maybe one of the worse tutorials I've even seen. To become clearer please don't change any dimensions without explain which one was modified and why you did it.