No video :(

SolidWorks Tutorial

Подписаться 338 тыс.

Просмотров 142 тыс.

50% 1

sw-tc.net/ solidworks tutorial 268 screwdriver bit cr-v pz2. If u have one, bring it & look at it (or google it), so maybe u can imagine another method than the used in this tutorial to make the tricky shape. (we though about the method used in make the citrus juice, but it is more complicated! Cr-V :►Chromium-vanadium, more about the nice features of this alloy :► en.wikipedia.o...
►juicer tutorial:► • SolidWorks Tutorial #2...
►Engine 2 will be completed on:► • Engine 2 project
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@scientist100 4 года назад

A lot of trial and error during this tutorial lol. This will be confusing for newbies as you tend to undo a lot of the work and try again. The idea and technique that you used is what I needed.

@sonik7452 7 лет назад

В уроке построение сложное. Проще модель построить так: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SWUPF_U3E_o.html Если знать технологию изготовления, то легко и построить модель. In the lesson, the construction is complex. It's easier to build a model like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SWUPF_U3E_o.html If you know the manufacturing technology, then it's easy to build a model.

@skankhunt-zw6gg 4 года назад

Thank You. The Bounded Surface part was very advanced

@chriscadman5715 3 года назад

Nice work! If I did this, I'd eliminate the crotch surfaces (I realize you're showing what SW can do!) and use a swept rectangle cut instead. But if this part's going to made with a punch-press, then you don't need those surfaces. Also, most of the newer Posi-bits have ridges on the blades for gripping. Anyways, nice presentation at the end!

@What_Other_Hobbies 7 лет назад

1, Keep 1 sketch visible and leave 2 center lines in it would save a lot of time. 2, Instead of using "Knit", intersect would work just find with few steps. 3, The first boundary surface is not a very good practice. Choose cylinder surface offset by 0 then extend, or just extrude a cylinder surface.

@nardaoeletronica Год назад

Excellent job

@kandasamyrajan 7 лет назад

Excellent video.Particularly it is teaching usage of Boundary-Surface. Thank you very much.

@wilhelmtaylor9863 5 лет назад

The cuts between the philips blades is a simple grind operation. This is way more complicated than it needs to be, although it demonstrates a technique not oft used.

@peachfreude Год назад

hard for me but it was satisfying. will try other exercises too

@redualein 6 лет назад

Good music for this type of tutorials

@automan1223 7 лет назад

Great bit, merge that with Snap-On s serrated splines on the tip and you got the meanest Phillips bit ever made !!

@vasudeokatdare6530 6 лет назад

Tutorial is good no doubt, But selection of commands must be slightly slow to see from freshers angle.(Reduce the command selection speed please) otherwise No Problem. Thanks !!

@BleDLark 5 лет назад

If you're trying to do this and you are having some troubles, let me explain to you how i solved them. In the minute 4:12, the correct measurment it is 2.54, not 2.50. In the minute 12:40, there's no need to select both curves as it is shown in the video, so you don't need to convert entities (which it was my option when i saw that) It will work out the same if you select the curve as a whole. But, if you're having trouble with that, make sure that your lines are well drawn, otherwise it will never work.

@emreaka3965 3 года назад

I couldn't do it. :(

@errik0o 5 лет назад

Learned a lot from this. One question, aren't the little cutouts on the body supposed to be in the other direction? letting it go into the bitholder but not out.

@wilderrodriguez5317 5 лет назад

Esta bonito pero creo que se puede mejorar, lo mas que me interesa es el trabajo con superficies tal vez tengas algunos vídeos de superficies avanzado .gracias de antemano

@AshokKumar-gb1sw 3 года назад

Good job man

@adolfocarrillo248 7 лет назад

in minute 4:12 the dimention of that square is not 2.50 mm it must be 2.54 mm otherwise the tip of the bit will have like a little fillet screwing up the piece.

@rubik777 6 лет назад

2.51mm

@BerkinB 5 лет назад

Very nice !!!

@hoannguyen750 5 лет назад

thank you

@ShaneGardec 3 года назад

What kind of display settings are used to achieve this kind of presentation style?

@lqw8371 4 года назад

I want to know how to make the luster and color!!!

@ravikumarkanagaraj690 6 лет назад

While doing knit process surface plane is not available for me.. only three surfaces are available. need help about that

@rubik777 6 лет назад

4:31 - 4:32 missing instructions

@angelgarza9366 4 года назад

you just repeat the last step 3 more times or mirror feature about a plane

@vasudeokatdare6530 6 лет назад

How to mirror command use in feature stage,say one side of threads is available ,now I want to mirror on other leg of `U'Bolt. please explain...

@chetnaprajapati9483 3 года назад

how to sync two circle example:- one circle dia75mm and secound circle dia1000mm dia1000mm (1000mm-100mm=900mm) so change dia 75mm change (75mm+100=175mm) mins i one circle dia minuse so secound dia pluse is value how create बहुत बढ़िया पर मुझे ऐसा काम कुछ इस तरीके से करना हो तो कैसे करे कृपया बताये जैसे के एक circle 75mm dia का हे और दूसरा circle 1000mm dia का हे अगर में इन दोनों में से किसी की भी साइज़ बदलता हु तो वो एक दुसरे में pluse minus खुद्ब्खुद हो जाये जैसे के अगर में 75 mm dia में 25 mm जोड़ता हु तो वो dia 100mm हो गया पर जो दूसरा dia जो 1000 mm का हे वो 975mm खुद्ब्खुद हो जाये बस ऐसे कोई भी एक dia अगर pluse होता हे तो दूसरा dia खुद्ब्खुद minuse हो जाना चाहिए और कोई भी एक dia minuse होता हे तो दूसरा dia खुद्ब्खुद pluse हो जाना चाहिए हा पर जितना हम pluse या minuse करते हे उतना ही value एक दुसरे dia में pluse minuse होना चाहिए कृपया करके ये बताये ये कैसे हो सकता हे solidwork में ?

@neoseeker02 4 года назад

I was having trouble with the first boundary surface in the tutorial, then it just worked all of a sudden.

@Roberttang20 3 года назад

what did you do?

@patopeje1472 5 лет назад

my head is in pluto after watch this

@HustleRussell87 6 лет назад

The beginning of the video shows the bit without fillets as lines - as if you were able to turn a filleted surface into an ultra-clean surface. Mind explaining how you did that?

@4n2earth22 6 лет назад

Display Style: Shaded. (instead of Shaded With Lines)

@pch4287 6 лет назад

Amazing video

@AlaaElhamrawy 7 лет назад

Excellent

@mehdifarhadi9709 6 лет назад

very nice, thanks

@Linkab 7 лет назад

a cuestion is solid works 2017? good videos.

@jhormanetxeverry7247 7 лет назад

Awesome!😃

@vyngo1335 7 лет назад

I did exactly but could not select the curves as 12:40, someone can tell me why? tks

@kombuchamp 7 лет назад

I solved it this way - I used the convert enteties on this curves before selecting them in boundary surface tool

@meetdalwadi 7 лет назад

kombuchamp but how to convert entities on those curves?? I can't convert them.

@charlesxabier1891 7 лет назад

i did it just selecting the curves without using the selectionmanager

@andreasprongidis5339 6 лет назад

You have to hide some features that are related to the curves and show the sketch of the curves only.

@user-cy7so3ot9q 2 года назад

@@andreasprongidis5339 I tried this and it works, thank you so much:)

@dennisvillalobos5894 7 лет назад

Hi!, awesome video. Fast question: Where I can find the drawing of bit? It is just for try to draw it! Thank you!

@nikhilnick8886 5 лет назад

grabcad.com/library/cr-v-pz2-1

@rozbeldorival1274 7 лет назад

Nice

@rodrigochiozzini 7 лет назад

Great !!!!!

@jorgeg162 4 года назад

Are you in some type of race against time? What is your purpose making this video?

@MyBilal19971 7 лет назад

I can't select the group of entities at 12:27

@XzzVttll 7 лет назад

hold ctrl

@timecop1983Two 2 года назад

And took only 24min!

@chubbyBunny94 6 лет назад

y you no talk?!

@FatihGTR 6 лет назад

1 KURŞUN 2LİRA BİRADER

@ishanprajapati_1092 3 года назад

Ads bahut aati hai aapki videos mai

@user-wc3qv1te5p 6 лет назад

wrong method to mak this .....

@rajateja1111 6 лет назад

Like u r face only

@The1zaakk 7 лет назад

first...!!!

@josephschmoberg6778 7 лет назад

How do you expect someone to learn from this video ... were you in a race with someone to see who can do it the fastest ....I might add, I"m sorry that you have no voice, and your hearing is bad ... other wise you would have never played this horrible music. To bad, could have been a good learning video, but it is not !

@4n2earth22 6 лет назад

Suggestions: Mute the sound and put your favorite music on instead. Use the playback speed control RU-vid offers and slow it down till it matches your speed. Perhaps there is more to learning than complaining?