Sony 70" LED TV LED Strip Replacement Tutorial 3PCM00693A/3PCM00694A FOR KD-70X690E 

OMGosh!!!!!!!! I DID IT! THIS IS NOT FOR THE FAINT OF HEART! I started at 12 PM and did not finish until 10:40 PM, of course there was time for lunch, dinner and kickboxing. But man, this is a task for someone who is either computer hardware, electronic, lego-mind savvy since there are a lot of parts. I had to break a lot of tabs, figure out various alternatives (problem solving), and made good use of aluminum tape to patch or replace factory tapes. Remember, we are suppose to be opening these units so some of the pieces I had to hot glue back. I plan to do a complete review with pictures. After all the hardwork (Homeschool TV Repair Project), it worked !!!! "Let's GOOOOOOOOOOOOOOOOOOOOOOO"

Thank you!! following your video and a couple more from other creators I was able to fix my lg 65um7100pla using a new KIT of lights bought from aliexpress...

I followed all these directions, mind you I'm pretty handy person, I run a handyman business. Anyway I can see the LEDs are working but now I've got no picture at all. Before I had blue picture. Any ideas?

Parent got a 15 yr old panasonic, perfect picture unlike my 5yr old toshiba with this problem.

Help! 2 wires going to the strip came out of the connector going to one of the strips. How do I know which is positive or negative? I also had to remove the backlights after installing them because I did not place them correctly. I used a backlight tester and they all work individually but how do I know if they work correctly all together?

It would be good to note to Mark where the LED strips will go. And to just pull through the standoffs as most of them will break.

Firstly Thank you for this very well done video!!!.....i had this done last week by a pro and when viewed on a solid color background (white of grey) there are horizontal streak across the whole screen and some part of the screen are darker smudges . My question would be if the backlights are replaced should not the screen look like new or are the streaks not related to the backlights? Another thing the PRO said was that the Power supply had to be 'upgraded' but it was not actually replaced......is this a ploy to get more money it made me wonder... i paid 600$ CAD for the LED replace if anyone else had this done i would like to know if the cost of repair was reasonable.

What is the reflective plastic sheet that fits over the LED strips called? And can I buy a replacement?

Great video, helped me a lot. Where can I find replacement Standoffs? most of mine broke when I removed them.

Are the KDLs much different form the KD in this respect?

I don't see any Telefunken TV tutorials, and my Telefunken is a 50 inch with 14 leds per solid strip... I can't seem to find spares as well... Do the led strips have to be original??

There seems to be a big 2-piece crack in the lower part of the TV's panel. Even if it's scratched, it's garbage for me! It didn't test either the old led bars or the new led bars immediately after installing them. Also, at the end of the video, it could not show that the TV was working. Or did they use junk television to shoot video? Still an informative video, thank you.

I have a Vizio e601i-a3e, yes it old...but doesn't get used much, so I would rather repair than buy new if possible. If the TV hasn't been on for a while it will come on and sometimes work fine for 10 min, sometimes longer. Sometimes it seems to flash a little bit and then the screen will eventually go black. Sound is still on and I can see things on the screen with a flash light. It will turn itself off after the screen turns black. I can continue to turn it back on it it may work for a little while, bit the duration seems to get shorter every time. No lines or anything else wrong when the picture is visible. Would this be the T-con board?

I have a purplish, violetish color on the screen of this same exact model. Do you think replace in the LED strips would help? And if you think so where can I buy the LED strips from?

Another question..... The LED on this particular Sony model had turned Purple , i have some much older Monitors that never lost their clear white glow... Does SONY used mediocre LED ?

Toshiba 40L310U 1. Dimming in one corner of screen. 2. bought a new TV gave the dim corner TV to next door neighbor. 3. Year later, neighbor informed me TV finally gave out. Black screen, flashlight test showed faint image, haven't tested sound yet. Leaning towards bad backlight strips. My question: how dangerous is trying to fix on my own for the first time. Confused about grounding.

What are the little devices called to grip the screen that you used?

Anyone else have their TV completely taped together inside completely unlike this video? We tried to remove the panel like the video shows, and it got caught on a bit of cloth tape and broke the display.

Having a hard time finding led strips for Toshiba 40L310U

How exactly did you remove the ribbon cable? You didn’t show that really well, I’m stuck trying to disconnect it

Cfl lasted a lot longer all these led sets seem to be is ewaste lucky if you get 4 or 5 years use out off them

Hello sir i need KD-70X6700E MODEL MOTHERBOARD CAN ANYBODY HELP TO FIND THIS BOARD PLEASE

Great video but if your doing this for the 1st time there is alot more tape than this video shows... alot more

My KD 70x690e, developed a constant blue tint all over the screen. I lowered the blue to zero in advanced settings and helped a bit but it is still there very much. My question is if I replace the led strips will that solve my problem?

Model. TLEDD-50FHD Telefunken

obrigado por compartilhar

No comment or no info??

It looks abit complicated for diy

Too much fannyijg around. Best get a new tele

This not a 70inch but a 60 or 65