No video :(

Sony RX100 Mark IV Disassembly/Assembly! [What's Inside]

Подписаться 75 тыс.

Просмотров 33 тыс.

50% 1

Here's disassembly and assembly of my broken Sony RX100M4. This is NOT A HOWTO GUIDE, I just merely want to document the disassembly process since my camera is broke anyways. This video should help someone out there in the future since there are no disassembly videos of this camera yet (as of publishing this video).
This video is LONG, I didn't edit it because I just wanted to put this out there in case it helps someone but I guess it could be entertaining to watch me mess up lol.
If you like this video, please hit the Like button and subscribe to my channel:
bit.ly/highonan...
Also, this is my 2nd channel, my main channel is here:
/ zedomax
Best way to contact me is on Twitter as I am always tweeting 24/7:
/ zedomax
Follow me on Google Plus here:
plus.google.co...
Follow me on My Facebook Page:
/ howtoblog
Follow me on Instagram:
/ reallyhighonandroid
Follow me on Periscope, my id is "zedomax"
RU-vid Audio Music Credits:
Dub Zap, Champ ------------------------------------------------------------------------------------------
IF YOU NEED HELP ASAP with your Android rooting/custom ROMs,
PLEASE USE the "Android Rehab Center" on our forum here to post your questions:
forum.highonan...
I do try to get back to you if you leave a comment on RU-vid also but sometimes
they get lost and it's hard for me to get back to everyone due to RU-vid comment system,
so please use the forum link above if you need help ASAP.
------------------------------------------------------------------------------------------
This is my SECOND RU-vid Channel, for my MAIN RU-vid Channel, subscribe here:
/ zedomax
------------------------------------------------------------------------------------------
Follow my social media:
/ zedomax
/ reallyhighonandroid
/ howtoblog
------------------------------------------
Join the HighOnAndroid VIP Fans List here:
highonandroid....
------------------------------------------
#HighOnAndroid

Опубликовано:

3 мар 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@MyPupDaisy 7 лет назад

Bought the Sony RX100 IV brand new in the box, pulled it out, getting ready to put the strap on and sneezed real hard and it flipped out of my hand onto the carpet and popped the the one spot on the bottom without a screw out of it's tab spot. Wasn't sure how to fix it. Watched your video (@22:46) to remove the bottom screws, pulled the bottom up enough to drop the tab back in, screwed back together and good as new. HUGE thumbs up. THANK YOU High On Android!

@GioLocated 8 лет назад

My camera was already broken so I didn't mind the fact that this video wasn't a "how to repair" the camera. My favorite parts are 8:40, 13:35, 43:54, and 46:28.

@unusualcomment9731 Год назад

How is the capacitor not fully discharged with one touch and no battery tho?

@slash12rules 6 лет назад

Thanks for posting...My mark II had a spot, and this video was helpful in disassembling, and reassembling my camera...spot's gone, and it was a success.

@michaelromeo5689 4 года назад

Now, THAT"S entertainment. The moral: "if it ain't broke, don't fix it"

@Misigun99 4 года назад

flash capacitor man

@pjpongor 8 лет назад

When removing the screws for the case, mind the location of each screw. There are two different lengths, with the 'top' screws just a bit shorter then the 'side' screws. If your flash will not pop-up when you are done reassembling, you have installed the longer screw into a shorter screw location,....., the screw is blocking the flash release mechanism ....

@clintcook5928 4 года назад

The "Mystery Cable" plugs straight in underneath the power button. There is no lock on it, just pushes in, very hard to get up in there and get it on. It is the one ribbon that came loose when I dropped mine bricking the camera until I plugged it back in and reassembled. I had the circuit boards out before I saw it had just barely disconnected. Probably would not have required as much disassembly had I noticed it earlier.

@Gurujewels 5 лет назад

I bought a RX100M5 on eBay. Its display doesn't flip in the selfie mode. Looks like the magnet on the corner which activates the magnetic switch is missing. If I place a magnet under the display, the LCD is inverted. How can that be fixed. Can I open the LCD and insert a magnet there?

@bratan007 5 лет назад

I just did this to replace the lens on my RX100 M5. Very similar but less connectors on the motherboard... Got zapped about 5 times in the process. I can't find a way to securely connect flash wire without getting zapped over and over again. In the result my flash is not working. I'm working up courage to try again lol

@GadgetReviewVideos 6 лет назад

I’m so glad you say “it’s not a disassembly videos tutorial”, because it’s not.cables are not spare parts, screws are different lengths and need to keep track wear they come from so they go back in the same whole. Capacitor in cameras can kill you, even a 3.1MP cannon elf, or an old film Kodak camera. Any camera with a built in flash. Get a multimeter with a LowZ mode to use so you can discharge that cal. Shorting caps work, but you also risk that voltage shooting into another board by shorting it. Please be carful with high powered capacitors. I don’t need the LCD, but mine is pretty scratched up. Bought a used one that was a demo unit. Still works great, can’t see the scratched when it’s on. But for aesthetics I’ll buy your LCD if you didn’t tear that ribbon cable? Then I can do a video on replacing the V (m5) LCD. The sad part is the LCD works, it’s just the plastic cover. For some reason they removed the screen protector that it came with.

@DeanoTXR53 4 года назад

SO you seem to know what you're talking about... so I have a question. Any idea how to remove the focus ring itself from an rx100 iii? I can't find instructions anywhere and mine is malfunctioning. i can find replacement parts but no instructions on how to remove or swap them

@fpink3 5 лет назад

Wow! Let this be a cautionary tale for anyone that may want to "fix" an even barely-functional Sony RX100 Mark anything. My RX100 MII has a bit of dirt on the sensor. I thought about cleaning it, which led me to this video. I've decided Photoshopping each and every image where the dust is visible is way easier than opening the Sony. The agonizing 3-4 minutes where the stubborn lens/sensor assembly steadfastly resists extrication is my favorite part.

@gwapster13 5 лет назад

A lot of people who will try doing this are gonna screw up. And most likely get zapped by that capacitor too.

@sunnywmq 3 года назад

he scared me evey time when he got shocked. I hope I won't shock myself when I do it - did you take the battery out?

@fabimawn 7 месяцев назад

Well... you aren't buying air with these camera's. I got a cybershot from 2013, (Cyber-shot DSC-HX50V), and upgraded to a RX100 Vii last week, but man, it's the same size and sooo much heavier (now I understand why). Props to Sony to putting all of this engineering in, but what a nightmare to work on it seems!

@danielwilliams7766 7 лет назад

I followed your instructions exactly. Electrocution and all! It really did hurt!

@MF.Productions 5 лет назад

That is actually the capacitor for the flash. The repair manual recommends wrapping it up with insulation tape as it can't be discharged unless one makes a discharger which is too much fuss.

@jesamani75 4 года назад

I dropped my mark iii when I got shocked lol

@llshedk Год назад

I tried this instruction video, and now I need to watch: "How to buy another Sony Rx100v!" Or even "How to set up a GoFundMe to buy another camera for the one you tried to fix." I was screwed (pun intended) when I bought that microscopic screwdriver set! I felt like a toddler trying to eat rice with chopsticks. The caption on this video should read, "This is a not-for-dummy video, only geniuses allowed to play." Or "Discover how to amaze by magically making $900 disappear with a microscopic screwdriver!" Back to the drawing board, maybe take on that 3rd job to pay for this disaster or ransack my kids college fund... although a second mortgage seems most likely.

@nznip 4 года назад

Hello, Where in the video can I see the speaker? The speaker on my camera is broken. Is it feasible to replace it?

@VirtueAbsolute 5 лет назад

Thanks for your helpful video. I think I have the problem of the Top Cover User Control Board ( RL-1038 ). Could you demonstrate how to replace that board? Thank you very much.

@weeeves 7 лет назад

Dude, discharge the flash capacitor by shorting out the two pins on the bottom of the camera (below viewfinder, where your left hand was touching). When you peel back sticky protective cover, you'll see a radial capacitor for the flash. It's quite large. BTW, how does 330v feel? LOL

@VoltageLP 7 лет назад

weeeves how the hell did that tiny cap still have charge after discharging twice on his fingers

@danielwilliams7766 7 лет назад

I electrocuted myself in the same way... it hurt A LOT. I yelled involuntarily. It is a pretty big capacitor.

@GadgetReviewVideos 6 лет назад

VoltageLP Because the body has a high resistance and it never discharged completely. Each time he got shocked was probably a little less, but it still had power left over after each shock. Any camera flash capacitor holds a lot of power at a high voltage.

@gonnabeok 4 года назад

What type/model of screwdriver did you use do case disassembly? (or what screwdriver model should be used regarding to screws used here)

@sleesonphoto 5 лет назад

hi, my sensor needs cleaning due to dust etc working its way in, im confident i can do this on my own, but it looks like the sensor removal panel is accessible from around 10mins into the dissassebly?? before you remove the large circuitboard?? am i correct in thinking that??

@cgfreeandeasy 4 года назад

Wich of these flat-cables are for the Wifi-Module?

@zero00tolerance 7 лет назад

Hello is the Mark IV body the exact same as Mark V for example like the back frame ? thanks

@DeanoTXR53 4 года назад

Any idea how to remove the focus ring itself? I can't find instructions anywhere and mine is malfunctioning

@LifeOfMikey1 8 лет назад

so i had a cheap little chinese made case with a tripod screw that attaches to your camera so the case stays on,, it broke inside the tripod hole and i cant get it out , can i be able take it apart to get it out

@TimeSpace1 7 лет назад

does the metal piece on top of the flash pop up unit come off without need of full disassembly? i dented that piece but the rest of the flash unit works

@FukNewSkool 8 лет назад

Do you have a link to the LCD assembly? Can't find one anywhere.

@ednaldo3703 8 лет назад

Ohh my god, it's so hard to disassembling. i shoudn't be able to do that.

@daves.projects 8 лет назад

you should have just checked the flex cable connections. after a drop they become disconnected. and yeah them capacitors are a bitch.

@Rinkel80 5 лет назад

I should watch your video first before I started screwing. Now I have a burned finger. 185 volt DC tells my multimeter.

@suntzu1409 3 года назад

Smartphones and desktops are much easier to disassemble than these guys. I wish if these were like these smartphones and desktops

@robokhod 5 лет назад

thanks for the good video!

@gustavosaito6724 7 лет назад

What is the thing that looks like a cylindrical battery sitting at the bottom left of the camera, right under the electronic viewfinder? I think that's what got busted in my camera

@VoltageLP 7 лет назад

Gustavo Saito that's the lens motor

@danielwilliams7766 7 лет назад

That's not a motor, that's a capacitor.

@bratan007 5 лет назад

@@danielwilliams7766 you both right. There's a motor there, but capacitor is much deeper...

@silverfox1234 7 лет назад

i need a how to guide to replace the lcd screen on the mark iv.

@kasou2482 7 лет назад

Please how to change sony mark 3 screen without opening the device? If it's possible

@zero00tolerance 7 лет назад

Nooo not at all

@Amir-nj6wb 8 лет назад

my Samsung Galaxy s6 edge wallet case is not working plzzzzzzzzzzzzzzzzzzzzzz can you say how to fix it

@cemaslan2791 5 лет назад

Please anyone can say me how can i find the connector part number of lcd screen on motherboard? Please help me :(

@luter82 4 года назад

How to destroy a 700$ camera and risk your life in the process :) No seriously thanks for the video and for the kinda warning for the electrical shock.

@chiefyolo1470 8 лет назад

max make a video on cm rom for samsung galaxy j1!!! pls!!!

@jesamani75 4 года назад

Watch that capacitor!

@crossistapercaso6080 3 года назад

8:41 @ElectroBOOM

@chrisb6003 7 лет назад

Taking apart a camera the "Dangerous Brian" way! Capacitors can kill, it's bad enough you touched it once, but twice? Oh dear....

@franklinmichael671 4 года назад

18:50

@karmone11 5 лет назад

Best part - 8:41.

@seerastube Год назад

Real enginer 😂😮😅

@MrSandwichk 5 лет назад

show me its sensor.

@guillermomolina6134 7 лет назад

My rx100 m4 does not tur on after a failed firmware update. The sony software is a garbage because bricked my camera. The update firmware process never started because the software warned my that I needed a full charged battery. There is a red light blinking near the memory card. Sony support tell me that the camera need service repair. Its very complicated in my country this. Someone can help me please. Regards