Sony RX100 IV Won't Turn ON | Main Board Replacement And Teardown | Fix | 4K

Подписаться 10 тыс.

Просмотров 6 тыс.

50% 1

If Your sony RX100IV won't turn on? Watch this main board replacement and teardown video:s.click.aliexpress.com/e/_AqcUTN
get 80% off at NordVPN:
go.nordvpn.net/SH4AV
FREE stuff on : takeaparttech.com/download/
My KIT: kit.co/TakeApart
Support Us on Patreon : / takeapart
visit our web: www.takeaparttech.com
FB:
/ takeapartyt
Book Your next Holiday here: www.booking.com/index.html?ai...
Thank You and have a look in links bellow for parts or gadgets you need! :
RX100IV main board:
s.click.aliexpress.com/e/_AqcUTN
RX100IV lens assy:
s.click.aliexpress.com/e/_ATrUZv
RX100IV shutter button PCB:
s.click.aliexpress.com/e/_9H6XDz
RX100IV viewfinder:
s.click.aliexpress.com/e/_9ztNnp
RX100IV flash assy:
s.click.aliexpress.com/e/_ALp2r5
RX100 hand grip:
amzn.to/38sL9bX
amzn.to/3noZZVb
Tool KIT :
s.click.aliexpress.com/e/_A7i5xv
#takeapart #sonyrx100iv
way to donate via cryptocurrency:
BTC :
19PJUJFmuDWYdW321mGn9qLUXaH5dnWPbj
ETH:
0xf2dcd9ad4ce2939ce2323e469c097008cbbd4ec3
ZEC:
t1WgUTwKYaQj4g2Rojsik4fqqmrUfpa8mcK
disclaimer:
TakeApart is not responsible for any damage on your devices or property caused by following this video, this video is informative only ! Disassembling, modifying or trying to repair electronic devices, gadgets is not recommended for untrained persons. Applying any liquid into or onto electronic devices is bad idea and you should never do so if you are not a trained professional!

Хобби

Опубликовано:

7 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@newblor 6 месяцев назад

Excellent guide. Thanks! I took a punt on a dirt cheap IV with no power but a like new body from a reputable seller - reported no LEDs, no life at all. From experience with compact cameras, I know that half the time this is simply a ribbon cable coming loose. Usually battery to main board or top control board. Followed your steps to get to the main board. Disconnected and reconnect all cables, battery in and voila! I now have a fully working IV for next to nothing and an hour of my time.

@takeapart 6 месяцев назад

thanks for watching!

@aspionerov 3 дня назад

8:10 This is a close-up of a memory card reader. In your opinion, if the SD card cannot be inserted, then you need to bend the springs back. Or change the bottom block?

@Cekios 3 года назад

Nice video, How did you know to replace the main board? What happened to the camera.

@takeapart 3 года назад

Hi, it was bricked... red light next to the sd card just kept blinking red ... code for processor error.

@Cekios 3 года назад

@@takeapart Ah ok, nice to know. I have a problem with my rx100 m3. The turn of turn on sign shows up. This happened from a drop. I replaced the lens and the sensor, still no fix. Maybe it's the mainboard?

@takeapart 3 года назад

yes sounds like it!

@jorgereinozo6650 3 года назад

Hi TAKEAPART, I have a RX100 V showing zero signs of life, no charge light, not even that red light process error, thing won't even charge on a full battery.Will try to replace mainb Great work!

@takeapart 3 года назад

hi, yes it is probably that main board… internal components can be little bit different from IV . thanks for watching

@michaelbasaraba1325 Месяц назад

I know it’s been two years but was the MB the issue for you when with no blinking lights?

@takeapart Месяц назад

@michaelbasaraba1325 yes

@michaelbasaraba1325 Месяц назад

@@takeaparteven with no blinking lights?

@vitalygoncharov4370 3 года назад

Thak you for the video! But why didn't you add thermal paste on motherboard chip?

@takeapart 3 года назад

thermal pad does the job... I didn’t had any paste at the time.

@gp6885 3 месяца назад

Hi.😊 I need to replace the flex cable that has the speaker on it. Can I use a soldering iron to take the speaker off and put it on the new flex cable? Or will it be too hot and damage the flex.

@takeapart 3 месяца назад

yes desolder speaker… it will be fine

@Babube Год назад

Hi! Im having exactly the same problem in my rx100 IV. Do you think that by using not original micro usb cables might have helped to do the damage? Thanks a lot for this guide! It was the only true help i found

@takeapart Год назад

Hi, it is hard to answer… this little beast does a lot and it can take a toll sometimes…. I wouldn’t say a cable was the issue

@arnoldpalmeroy2993 9 месяцев назад

Hi Babube, Yes! This is what happened to mine. You need to use the more expensive phone style micro-USB Charger. The cheap ones will fry the motherboard. Our countermeasure to stop this from happening again is to purchase the external battery charger (Sony ACCTRDCX) and never using the micro-usb port on the board.

@nishiyamashima9797 7 месяцев назад

@@arnoldpalmeroy2993 More likely the charger would fry the port. You shouldn't cheap out on both charger or cables.

@juansanchezroco1669 3 года назад

Hi, good video, how do you fix bent part next to viewfinder?

@takeapart 3 года назад

hi, I just bent it back by hand… easy fix

@juansanchezroco1669 3 года назад

@@takeapart Thanks, I will try.

@takeapart 3 года назад

thanks for watching

@stacker0523 2 года назад

Nice video! keep up with good work! My RX100VA is currently does not recognize memory card. And red light blinks 4 times when I put SD card in. Is this on motherboard or SD card slot?

@takeapart 2 года назад

hi, I would say sd card slot …. look inside with torch(look for bent terminals) if the terminal/ s are not broken you should be able to straighten them out with pair of tweezers. thanks for support and watching!

@stacker0523 2 года назад

@@takeapart Very thank you for quick response! I've disassembled it and slot, terminals looks fine. Replacing SD slot part would work for this?

@takeapart 2 года назад

hard to tell… just double check those terminals… even slight bent will affect functionality.

@stacker0523 2 года назад

@@takeapart Okay I'll try it Thanks!

@takeapart 2 года назад

let me know how it went

@rafaelgonzalezcapelo7318 Месяц назад

Hello, I have the same model of camera and the error is: when I turn it on, the lens automatically comes and goes and the photograph cannot be taken. Do you know what happens to him? Best regards, Rafael.

@takeapart Месяц назад

something is broken or stuck in lens assembly (my guess)

@diddlybopper 2 года назад

Is the repair a service you offer? my RX100 powers up but no LCD zoom not working etc.Will check the error code.

@takeapart 2 года назад

Hi, I can not recommend any service… sorry… thanks for watching

@pupettomontmartre 29 дней назад

Hi i have the same camera. It works well excepts for some problem: when left in a cold place (under 10 celsius degrees) it loses the settings data and it prompts asking to insert language and time. The other problems, the battery gauge doesnt work, it doesnt appear on screen with any display setting. Also i cant change the display brightness (function not available, the menu tells). I think this is in some way is related to the battery gauge problem. What do you think it can cause the problems and what i should try to check? Thanks in advance, the video is really useful!

@takeapart 29 дней назад

probably battery management PCB… (one attached to battery compartment) .

@pupettomontmartre 29 дней назад

Thanks for the prompt answer, i'll try to see if the batteryt PCB is a part of the camera easy to reach!

@takeapart 29 дней назад

@pupettomontmartre well, it requires quite a lot digging…. but doable

@arnoldpalmeroy2993 9 месяцев назад

My RX100 IV was completely dead, no signs of life whatsoever. I think it was caused by using a cheap micro-usb charger. I purchased a new board on eBay (the AliExpress link no longer works) and installed it following these instructions. A couple things to note: The video skips the removal of the control buttons. They fortunately slide off and the ribbon connector just pulls out. The video puts the lower left ribbon cables UNDER the copper plate. The factory routing has them OVER the copper plate. Not sure if this makes a difference. My antenna glue (to glue the antenna to the main board) was no longer functional. I used the tiniest amount of Clear Gorilla Glue to re-adhere the antenna. It worked well. There's no need to glue the antenna to the body, it just tucks underneath the outer case. Be careful adjusting the rear cover screws. The center two screws can interfere with the flash release. If the flash release no longer works, simply loosen one of the two screws until it does. I did not find any need to purchase new thermal pad. You can re-use the old one from the old chip without issue. After re-assembly, the camera works great! This video was extremely helpful. However, this is NOT an easy thing to accomplish. It is very doable if you take your time.

@takeapart 9 месяцев назад

thanks for watching and your input

@arnoldpalmeroy2993 9 месяцев назад

Thank you for the video, you saved my camera! @@takeapart

@user-vb6tb6mh6x 4 месяца назад

Hi! Can you help please my rx100 mark 5 turns on and off repeatedly. What should be the problem?

@takeapart 4 месяца назад

hi, hard to tell… maybe a main board.

@jackspiceradams Год назад

I fried my RX100 M3 by putting too much voltage in with a dummy battery. Will I need to replace all the boards inside or just the main board?

@takeapart Год назад

hi, I would try board near battery compartment first.

@jackspiceradams Год назад

@@takeapart thank you! I will try that

@dorfschmidt4833 Год назад

Caution, cable to the NFC antenne can tear, if you bend it like you do.

@takeapart Год назад

hi,yes be careful! thanks for your tip

@dorfschmidt4833 Год назад

@@takeapart I learnt the hard way, thankfully it did not reach the traces.

@yanperus4001 3 года назад

I have the same problem on the M1. Is it possible to put a board from M3-M5 on M1 model?

@takeapart 3 года назад

hi, I don’t think so …. if you need new board please follow links in description

@yanperus4001 3 года назад

@@takeapart There are no RX100 M1 boards on aliexpress. Only M4-M5 models

@takeapart 3 года назад

getin touch with seller and ask … they will be happy to create new listing for you .

@yanperus4001 3 года назад

@@takeapart ok

@aminesemlali8607 7 месяцев назад

After a small drop, my mark 7 wont turn on and no led. Where should i check first? I opened it but don't not know where to check.

@takeapart 7 месяцев назад

hi, check all connectors first

@01findus 2 года назад

My Sony RX100 MK IV is completely dead after a drop. Not even the red LED is blinking next to the battery. Any idea?

@takeapart 2 года назад

hi, hard to guess… I would open it as check connectors first

@mohamadchebli1653 2 года назад

my camera not turning on 2 long red blink and 6 short blink red ... what could be the issue . how can i get the red led blink code

@takeapart 2 года назад

hi, it is very hard to find out what exactly the code mean. I would say it is Motherboard issue.

@TheoreticalLimit Год назад

After research, I strongly suspect it to be a power issue (over or under voltage, or short circuit) then when detected prevents the image processor to start. The rx series are designed to be debugged through usb, using a multi terminal protocol cable (15 pins). So, normally, if you take out the battery and plug a USB cable, it should bypass the hang event and boot intime a certain step, and you should the encounter some functionality issues because a par le the board shutdown itself to prevent any further damage. The mtp USB port has uart access and it's enabled in the Sony rx kernels. I've ordered a mtp USB connector and I'll try to access the UART console, so I could examine logs and boot sequence. I've learned that those Sony boards are strongly inspired from beaglebone boards, which are almost impossible to brick. So the most probable issues are physical damages. (Ribbons, internal battery, capacitors, DC/DC converters...)

@xgwang2750 Год назад

I got same issue with 2 long and 6 short red blink on my rx1rm2. Have you fixed your camera and got the reason why it happens?

@TheoreticalLimit Год назад

@@xgwang2750 Not yet. I didn't have many times to do it.

@makemystronger..freemegapi6800 Год назад

My rx100 is over..reboot after push power button..im installed open camera and fails download app at reeboot camera is fails..!! How to fix hard reset whit button not possible

@takeapart Год назад

it is difficult to troubleshoot…. if you positive that there are no mechanical issues… and battery is good… I would bet on main board…