Sound for Video Session: Sound Devices 888 Setup & Q&A

Подписаться 25 тыс.

Просмотров 7 тыс.

50% 1

In this week's Sound for Video Session, we'll walk through the basic setup of the Sound Devices 888, how to configure inputs and a tour through some of the menus. We'll then answer your sound related questions.
If you’d like to learn how to make great dialogue audio for your film and video projects, please have a look at my courses at school.learnlightandsound.com including processing dialogue audio in Adobe Audition and DaVinci Resolve/Fairlight, recording sound, how to use the Zoom F4, F6, F8, and F8n, and how to get the most from the Sound Devices MixPre series of recorders. We have a course on sound for live-streaming with the ATEM Mini and just added Introduction to Izotope RX for Dialogue Audio.
Gear used or mentioned in this episode. The links below are Amazon.com, B&H Photo, Sweetwater, DVE Store, or other affiliate links. As an affiliate, I earn from qualifying purchases:
- Sound Devices 888 field mixer/recorder - B&H, Sweetwater geni.us/zAryW4J
- Sound Devices 833 field mixer/recorder - B&H, Sweetwater geni.us/Toim
- Sound Devices A20 Mini wireless transmitter - B&H geni.us/bpYlc
- Earthworks SV33 studio vocal microphone - B&H, Sweetwater geni.us/jfIw
- Earthworks ETHOS microphone - B&H, Sweetwater geni.us/8G8UdBB
- Universal Audio Volt 276 USB audio interface - B&H, Sweetwater, Amazon geni.us/H5pbQ7
- Earthworks SR314 - B&H, Sweetwater geni.us/AqRF
- Epiphan Pearl Nano live stream encoder - B&H, DVE Store, Amazon geni.us/qXyXR5
- Panasonic GH5 camera - B&H, Amazon geni.us/InspOl
- Canon C70 Camera - B&H geni.us/ABYB
- Canon RF 24-70 f/2.8L IS lens - B&H, Amazon geni.us/qwsEs
- TA3-M to XLR-F Adapter cable to feed microphones to C70 or Blackmagic Pocket cameras - B&H bhpho.to/3o2dTOS
- ATEM Mini Extreme & Extreme ISO - B&H, DVE Store, Amazon geni.us/b8my
- Allen & Heath SQ5 Digital Mixer - B&H, Sweetwater, Amazon geni.us/sRxFU90
- Sound Devices MixPre II Series Recorders - B&H, Sweetwater, Amazon geni.us/O8e0
- Rupert Neve Designs Shelford Channel, pre-amp, EQ, compressor - Sweetwater, B&H geni.us/9ZfE77
Take your films to the next level with music from Musicbed. Sign up for a free account to listen for yourself: geni.us/G7by
Copyright 2022, Curtis Judd
Index
00:00 Start
2:58 Beginning of stream
3:33 Agenda
4:38 SoundDevices 8-Series Setup
47:55 Troubleshooting slight differences in L and R waveforms
49:28 Can you livestream with a MixPre and use NoiseAssist?
50:42 Headphone jack settings on a computer
1:03:40 Wrap-up
1:03:55 End of stream

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@marklholloway 8 дней назад

I was banging my head wondering how I'd get four AES outputs from the A20-RX to the 833 or 888 if the only AES input is XLR 1. Then I realized you mentioned the SL-2 not only makes everything cable-less from the RX to the 888 but it also provides a pure digital path to the recorder. That's brilliant! Thanks again for the overview and lesson.

@wandilek.9874 2 года назад

Curtis Judd you are a blessing to me. I couldn't afford to enrol for a sound course, I've just been learned a lot from you. Thank you very much for being so kind and caring 😊 I hope soon you'll teach us how to send channels to the director, producer, client on set, setting a private line between yourself, boom operator and sound utility.

@curtisjudd 2 года назад

Thanks Wandile.

@oumadennieokuku9733 9 месяцев назад

Great job O.D.O AUDIO Uganda

@jasonarvizu5296 2 года назад

Phenomenal job, Casey! Means a lot for you to take the time to help others in the community. THANK YOU!

@curtisjudd 2 года назад

Thanks, Jason.

@andrewp1513 2 года назад

Thanks for the answer Curtis. The dialogue recording I have is from a spoken word/music performance livestream. Mic one goes into an analogue mixing board, and the mixer main L & R outs go into the Panasonic GH4/YAGH audio unit. I’m not sure how much of a stereo image makes it to the zoom meeting, and I’ve always wondered if I need both L and R outputs of the mixer to go to the camera, especially in regards to dialogue. However, it’s a cheap yet robust setup that’s working well. Thanks again Curtis

@curtisjudd 2 года назад

For spoken word, I'd stick with mono. Thanks for the question, Andrew!

@andrewp1513 2 года назад

Thanks Curtis

@dnz8000 Год назад

Thanks for another great video, Curtis! I just got the 833 and are having trouble getting sound from usb input in the headphones. Any videos or articles on how to use it as an USB interface?

@miguelsotto-mayor7325 2 года назад

Thank you for the video. You made it exactly in the right moment for me. My 888 and SL-2 will arrive tomorrow, hopefully. 😊 I also use IKEA Ladda batteries and tried rechargeable lithium, but had problems with that because I was not able to see when they die. I tried with my wisy and G4 transmitters and suddenly without warning they stop working. Have you had the same experience? What brand of lithium batteries are you using? Thanks!

@curtisjudd 2 года назад

I just bought a set of Lankoo AA Li-Ion rechargeables. Yes, every battery chemistry works a little differently. Ideally, the device needs to be configured to know which chemistry it is working with. Not all devices support that.

@loui425 3 месяца назад

Hi curtis, I know you touch on it towards the start of this video but where do you recommend your LR mix hitting on the meters for a live broadcast mix of speech (3 or 4 stick mics)? Average around -18dBFS peaking at -10 or peaking at -18dBFS?

@mathewcoulliette2233 9 месяцев назад

Hi Curtis, Hope you are well. Hope you are enjoying your 888. I have been reading the manual for the 833. I was wondering if you would be so kind as to explain what “Bus Sends on Faders” means. I have not heard anyone on RU-vid explain it. Thanks Mathew

@curtisjudd 9 месяцев назад

Hi Matthew, that's for sending audio to another bus and controlling the level at which it is sent, if I understand it correctly.

@mathewcoulliette2233 9 месяцев назад

@@curtisjudd why would I need to send audio from 1 bus to another bus?

@curtisjudd 9 месяцев назад

@@mathewcoulliette2233 to make multiple custom mixes for different people either on set or in post production.

@hengung5891 Год назад

I'm interested in sound for film and tv. Is the 833 enough for most productions or should I be looking into the 888? Thanks in advance!

@curtisjudd Год назад

That depends on the types of productions you plan to work. The 888 is much bigger and heavier - I usually have it on a cart. It would be quite a lot to carry in a bag all day. Also, it depends on how many inputs and outputs you need.

@mathewcoulliette2233 10 месяцев назад

Hi Curtis, How are you? I think I know what my Ultimate Audio Setup is! I want a Sound Devices 888 with the A-20-Nexus attached to it. I want (6) A-20-Tx Transmitters with Sanken COS-11D Omni Lavalier Microphones and acessories. I would also have a Mixpre-10 II in a bag for Bag-Drops or Hooking it up to Church or DJ sound mixing boards. Do you still have your Learning Light and Sound website? I would love to buy a course from you on the Sound Devices 888 mixer/recorder. I would also buy a course from you for the A-20-Nexus. Let me know if you make either of those; otherwise, have fun and take care! Mathew A Coulliette

@curtisjudd 10 месяцев назад

Hi Matthew, sounds like a really nice kit! I do not have any courses on the Sound Devices 8xx series or the Nexus, unfortunately. Have fun and make some great sound!