SOUNDCRAFT NOTEPAD 12FX (setup and sound test) 

I’m not a fan of the effects on this unit.

it is funny you ask because I have problems to make it work, no sound outputs if I plug it via USB to my computer..

@@dimonwait9079 having this problem too!

Sorry I’m not a Windows person.

There is a 3/4 usb return button below the outputs, just press it to output sound coming from computer. Of course remember to output your computer sound on 3/4.

I m using it on Windows 10 as well as Ubuntu 20.04 And it's working fine no problem

My understanding is you can use one or the Other. Your choice. Manual offers a bit more on this.

Same as you would connect speaker though this mixer is not designed for sub woofer don’t think it will work as expected.

To record in stereo u must choose stereo track IF YOUR DEVICE RECORDS IN STEREO. if not just duplicate the mono track and pan one to left side and one to right side. Mix down to stereo

You need 2 active speakers as this mixer has no power to speakers. Not a good idea to mix active and passive speakers.

@@DebErney thank u so much ! Greetings from Chile.

Say what???

;)

😉

I have tried with no success though it does seem like it should work.

@@DebErney I see. alryti thanks alot! 😊

I have been looking at this and found this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DkqbuBwpfPY.html

My Soundcraft notepad has intermittent problems with the effects not working.

I'm working on a video to post. I have used it with a MacBook Pro, iMac, iPhone and iPad Pro. Seems to work well just with hookup and configuration. I'll let you know how the recording end goes.

@@DebErney I appreciate the reply, I hope to see the video soon, when it's uploaded I hope you send me a link to the video so I won't miss it. your videos are good btw. cheers 👌🏾

@Solar Eclipse I've thought of that because it's cheaper but if so I'd like it to be FireWire or usb 2.0 but preferably the BEHRINGER X32 with all the built in peripherals n stuff. plus less for my project is better, I am working on converting my motorhome in to a mobile recording studio so the smaller the footprint the better (I think that made sense 😊)

I would try 2 of the combo jack inputs.

Deb Erney How can I use the 2 mic inputs in 1 and 2 alongwith the combo jack inputs in 5/6 or 7/8 for recording using GarageBand? What input channel do I need to select ?

This is good for someone just starting DAW recording. My effects come and go on it.

No idea

The manufacturers are very tricky with the descriptions. Yes, the Notepad 12fx has 4 individual, separate tracks. You can record them all 4 at once or in any combination.

You need to read your manual. Channel 11/12 is effects send channel. If only using the left it is a mono channel. FX Return (Notepad 12FX only) The FX return channel takes its input from the output of the internal Lexicon FX processor. • It is a stereo input channel but without input trim control or EQ. • Two jack inputs are provided which, when a jack is plugged in replace the internal effects routing to the FX return channel. Refer to Sections 4.3 and 5.1.3 for more detail.

@@DebErney Yeah. I already read that. Contrary to what the manual says, channel 11/12 acts differently from other stereo channels. Have you actually tried it? If you connect a single source to channel 11, you'll hear it from the left only. I have two 12fxs and they are the same.

First thing I’d check are cables. Then I’d try to update the drivers. If that didn’t work I’d try uninstall and re-install fresh. If your working with PC it is pretty much trial and error. I’ve even had to uninstall all drivers, programs, and regedit to delete all references then re-install before it worked properly. Thats why I use Apple.

You’d have to check the manual.

@@DebErney thank you

You can connect the audio output.

THE ALLEN AND HEATH WAS THE BEST I'VE USED. BUT it only had 2 channels at USB 1 out. Though that wasn't a problem for me. The Notepad 12FX has 4 in/out USB which is where it shines. Sound is OK. Effects I'm not thrilled with.

@@DebErney Hello, what about the Allen & Heath Zedi 10 there are 4 input USB ?

You can use any of the output on the notepad; headphone output, XLR output to any speaker inputs. You may need adapters www.amazon.com/hz/wishlist/ls/20USFX4JXUAUM?ref_=wl_share

You may need to unplug and plug in a few times b4 they sync. You can also try using a small USB hub to supply power. Mine setup right away.

You may also want to have the mixer turned on b4 plugging in.

@@DebErney thank you but i’ve tried all these tips and I also asked the technical team of soundcraft they said that the mixer doesn’t support the iPhone IPad , yeah it sounds strange! :((( But if u ll try it and do it please share with us:)) Greetings from Hungary

@@ufky1 I thought I had a video with the IOS but didn't. Great video idea. I'll get it out and post it Next week for you?

@@DebErney Great:) Thanks a lot

I don't think there is a way to separate the FX/Aux volume. Here is what the manual has to say; The Aux Bus sum is sent to the Aux Master output level control. This sum is made up of the aux send pre-fade contributions from each channel. That is, the sends are taken before the input channel fader and are not affected by the input channel fader levels. The Aux Master Channel can also be used to feed monitors, such as headphones or a stage monitor. Notepad-8FX The Aux bus is additionally sent to the built-in Lexicon effects processing after the bus master control. Notepad 12FX The Aux bus is additionally sent to the built-in Lexicon effects processing before the bus master control. See section 6 for more details.

@@DebErney Thanks for your answer, in reality the "Ouptut Type" key should be used to divide the two functions, but it does not. Do you have any other notions? the manual you mention is unclear on my content. The problem is that nobody complains about this on the internet, so either mine doesn't work or is done in another way. What do you say?

That’s all I got. Sorry

The advantage of the notepad12fx is the 4 channel in/out. The Behringer Q mixers seemed to have a “tinny” sound. At least to me. If you need 4 channels in/out at a very low price the Notepad 12fx is a good buy. I personally prefer spending a little more for the Allen & Heath mixers. Very high quality in and out.

@@DebErney does the allen & Heath record two channels separate or a single stereo.

Also I want to ask about the 1.0 usb of the allen and Heath z10fx . Does it compromise with latency or sound quality while recording.

There could be a number of settings that could be preventing this from recording to USB. I have a video that points out the most obvious problems you can fix. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Fvt1j7BMZLc.html I have a very hard time configuring PC with analog USB equipment where as Mac is much more likely to work. Good luck and watch the video as it goes over USB setup for both Mac and PC on an analog mixer.

I'm trying the same thing and the driver download didn't seem to work as it was telling me it didn't work with my operating system..12fx, Samson QH4 HP amp, audacity and usb connection. I'm getting sound from my speaker system but its horrible. I can't seem to figure out how to get the mixer to work..Thanks..

I use a 1/8” to two 1/4” cable to record my iPhone. OUTPUT TO INPUT.

@@DebErney So same case with the rca jack cable to 3.5mm right?,it should work i hope. Tqsm ya😊👏👍

It has two XLR main outputs, 1 1/4" headphone out, 1 aux output. I use it with my P.A. system. I run the two XLR outputs into the XLR inputs of your speakers. THEY MUST BE ACTIVE SPEAKERS as the mixer does not provide any power to speakers.

@@DebErney Thanks!

Weirdly, there is no power button. You have to plug in or unplug to turn off/on

The iRig is designed for guitar input. you can use the Soundcraft to plug into USB of your computer.

Great video as always Deb!! There is a good example of how to setup to record incoming calls here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PmtniHK8CLk.html

With the proper adapters you can record anything. Run headphone (or lightening to 1/8” adapter) output of iphone into 1/4” (any input) of mixer or recorder.

Here is a good article explaining causes. My guess is your going to have to play with the hardware buffer size. www.creativelive.com/blog/prevent-clicks-pops-digital-distortion-ruining-recordings/

I haven’t really started the USB recording with this yet BUT see my prior reply. If you have problems I’d take it back before the return period is over. Could be defective

Soundcraft doesn't use off/on switches. the units are turned off and on by plug in and unplug.

The sample rates are 44 & 48. I usually record at 48 KHZ.

It was probably the a/c?

@@DebErney I don't think so as I have heard that back in my radio days and the engineer said it was a faulty ground loop due to a broken/faulty wire. 20 mins later it was gone. Not AC unless you have your rig sitting on top of the AC compressor, lol.

General Awareness unfortunately the a/c is right above where I work.

@@DebErney hi Deb. Have you tried using an external fx? I’ve tried by using external channels 11&12 to input & output of an external fx (valeton dapper ves-2 bass), respectively but doesn’t work. It only bypassed the unit’s internal effects but no signs of effect from an external one. Can you help please? Thanks!

Just for anyone reading this.. the new drivers released recently are brilliant. No issues at all.