SP9073 FANUC ALARM - SPINDLE MOTOR SENSOR ALARM (FANUC) 

Hi. X axis 445 alarm what alarm?.

Thank you sir much sir today I hv faceing same problem of sp 9073 alarm so as your advice in video check encoder cable on motor terminal and tight sensor feed back cable then problem solve, thanks again sir

Nice video

Sir fanuc cnc alarm pe or video bnao

Good explanation What is the difference between Bzi,Czi sensor

Sir other common alarm ka bhi video post kare...like FSSB amp.is insufficient

Sir in my m/c VT-80 fanuc control.when the machine reads the G97 or G96 command there is sudden risein load value ( load 50% shown in display with a sound) Alarm SP -9073 comes during machining. Sir Please provide a solution to this problem

Dear Sir recently in my company Atc interupt twin spindle and twin atc magazine rh side atc interupt restored ok but spindle not on jog and mdi mode but with out alarm shown drive and operator screen,but cycle start button pressing time green light indication shown but no movement takes place but axis function ok please reply me sir.

Sir plz explain how spindle orientation done

Sir , 4 no spindle rotate in manually from hand.

please turn on the subtitle

also need to check Parameters 4133- motor id and Spindle initialze 4019-1000000

Describe all type motor feedback sensors.

Hi sir how to lock feedrate override to100 and spindle override to 100 by parameter

But my showing 9083 spindle motor sensor alarm,what is this difference?

HI, I got that sp9073 alarm, I checked cable pin by pin and there is continuity between ends. Could be a faulty sensor? How I diagnose it?

Sir how can I bypass SP9073 alarm.

Nicc....

Hi Sir Please guide me sp alarm 9001

please turn on the subtitle