SPE's NEW 6.7 Powerstroke HIGH FLOW OIL FILTER HOUSING with CAT FILTERS

Подписаться 8 тыс.

Просмотров 15 тыс.

50% 1

SPE 6.7 Powerstroke High Flow Oil filter housing with CAT oil filters.
Through years of testing at SPE our team has developed an oil filter housing that not only utilizes CAT filtration but also adds the huge flow needed to keep these engines alive under extreme conditions.
CHECK OUT THE PRODUCT HERE:
www.spemotorsp...
#powerstroke #caterpillar #diesel
Follow us on instagram:
/ spe.motorsport
Follow us on Facebook:
/ snyderperformanceengin...

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@nickvogel7934 Год назад

OF COURSE. The day after I buy 2 oil filters from the stealership. Dan, I’ll see you in 10k miles!

@jameshaskell6572 Год назад

Just gonna throw this out there because I see the keyboard mechanics starting already. The restrictions that create pressure in the system are the bearings and piston cooling nozzles and the rifling galleys in the block. Make more flow after the pump and through the filter is only helping matters. You always always want the least amount of pressure drop through the filter in probably every filter application. I’m sure someone will come up with one that u don’t. Nice job as always guys making power strokes great again. Also little food for thought,why do you think it is that ford never gives us a oil pressure gauge? They use a dummy switch for a reason … where in the circuit does that dummy switch go? Do your research for the answer and you will see that what spe has done will only help everyone

@josephpeltier6979 Год назад

This honestly needs to be pinned as the top comment

@d0uble_O Год назад

wow you guys did it 😎

@gabegutierrez3127 Год назад

So that stainless steel adapter means it’s for the cat filters. Is that removable to go back to ford filters as a worst case scenario. Or only for cat filters. Thanks.

@brandonhahaj1820 Год назад

Bought it, received it. Dropped the oil, removed stock housing….realized I had received the wrong housing….damn it. For the record I did order the right one. I should have doubled checked before I went to working 🤷‍♂️ just buyer beware. Dan is the man but the shipping department is average 😅

@rangervapes571 Год назад

Question about the 1/8 & 1/4 ports. My assumption is they are pre filter ports? I have a pre oiler that needs to be plumbed pre filter.

@richardbowles7690 4 месяца назад

Did you ever get an answer? What pre-oiler are you using?

@richardbowles7690 4 месяца назад

What is difference in pressure drop? (PSI) Also, I have read that Cat filters do not have bypass valve. Is that a concern? In cold weather?

@joshuakazfields4374 Год назад

Ordered mine. Hopefully all goes well.

@dougcjohn 5 месяцев назад

I read a concern for the filter bypass valve. Cat has the bypass in the mount, Ford has bypass in the filter… both focused more towards cold engine & oil, not dirty oil. Is there a concern for colder climate, cold engine starts if lacking a bypass valve.

@richardbowles7690 4 месяца назад

Did you ever get an answer? I am also concerned because of reading that Cat filters do not have bypass valve.

@dougcjohn 4 месяца назад

@@richardbowles7690 no, didn’t get any reply… thus I won’t use CAT Filters. I’ll take notice of lacking a by-pass valve. Obviously important if both Ford & CAT include in their designs… if not present, that’s a concern to me if 2 highly innovated Companies think it’s important enough to include.

@nathanmaddux2911 6 месяцев назад

How much more oil is added because of the larger filter

@nickjanssen3583 11 месяцев назад

I am always looking for better filtration and overall performance, but alot of folks are saying that since the cat filters dont have a bypass built into them, you could get oil starvation on a cold start. What are your thoughts on this? I like the higher performing filter media, but I am worried that combined with no bypass could be a problem on a cold start.

@jforu33 2 месяца назад

It's not the Bypass valve you should be worried about. It's the lack of a Flowback valve that holds back oil in the engine to prevent dry starts (especially in cold climates.) that you should be worried about..

@gunnerfox434 Год назад

With running a larger oil filter, are you going to have to add more oil to the system?

@SPEMotorsport Год назад

Yes, the larger 1r-1807 filter adds roughly 1 quart to the engines capacity. The shorter filter option is slightly less.

@gunnerfox434 Год назад

@@SPEMotorsport Just to be clear with the SPE oil pan and this new oil housing with the larger CAT filter the oil capacity would be 17 quarts?

@waynemackie3035 Год назад

Is a copy of the installation instructions available on your website? Thanks.

@edwardmontgomery9516 Год назад

Is the CAT filter better than Donaldson filters? As far as micron comparison the Donaldson looks to be better. I may be missing something. I use Donaldson filters on most of my applications.

@HSKFabrications Год назад

The donaldson will fit this adaptor if you wanna go that route.

@21armyn Год назад

solution for a problem? i got a 2020 f450 with 130k miles and a 2019 f550 with 170k miles no oil related problem. ive never seen anyone on the forums or social media page that has complained regarding on oil pressure problem with the 6.7's. i mean come on SPE i like the idea but saying its a ISSUE or a PROBLEM is kinda gimmicky..

@SPEMotorsport Год назад

If you see some of the casting variances that we have seen on the factory housings you would understand. Some of the engines we have torn down over the years with bearing issues whether main or rod bearing problems usually had casting flash or misshaped passages in the filter housing. Its a bottle neck in the oil system if you look at all the other passages in the engine (on the pressure side) they are machined not cast. So yes it may not be a problem for everyone but it can be for some. We like creating the best products we can based off of data we personally see and or experience. If you look at our comparison photos its very evident that the machined passages are more consistent and larger, there is no down fall to that.

@kenthuntsingersr7501 Год назад

not a gimmick,just good marketing.

@rangervapes571 Год назад

Are the AUX ports post or pre filtered oil? Wanting to add a pre oiler pulling from the drain pan and pushing through the filter

@richardbowles7690 4 месяца назад

Did you ever get an answer to this question? What pre-oiler are you considering?

@rangervapes571 4 месяца назад

@@richardbowles7690 No I never did, but decided against a pre-oiler after getting an oil pressure gauge and it is near instant oil pressure

@richardbowles7690 4 месяца назад

@@rangervapes571 Thanks for quick reply. Comforting to know of near-instant oil pressure.

@harleydavidson1620 Год назад

I'm assuming you also sell the Cat filters ? Whats the price of just the Cat filters ?

@timivy6395 Год назад

Do I have to torque the 5mm Allen bolts? If so what too?

@ryanadams8490 Год назад

What are the recommended oil change intervals running the cat filters short Vs long?

@SPEMotorsport Год назад

That's very relative to the type of oil and how your using the vehicle. We always recommend having a 3rd party lab test the oil periodically through its use to gain a base to judge off of, as far as mileage/engine hours. On the flip side increasing the capacity will always increase the life of the oil because you have more oil in the system. From Testing we found the oil degrades long before the filter does. Being the filters were designed for much larger capacity applications this makes sense.

@ryanadams8490 Год назад

Awesome, thank you for the reply. I guess my next question is would you just test the oil every 5K miles?

@naterod5617 Год назад

Do the CAT oil filters have an anti drain back valve on them?

@SPEMotorsport Год назад

No, The CAT 1R-1807 oil filter was designed to function vertically so it doesn't need an anti-drain-back valve. It is not needed in the 6.7 PSD application. The fl2051s was designed so it can be used in different mounting locations for different applications. We designed our housing to be perfectly vertical.

@colekiely3865 7 месяцев назад

Can I add an oil pressure sensor in the aux ports

@cavemanjoe79 8 месяцев назад

The smaller CAT filter looks about the same size as my 7.3 filter.

@ryanpanik8989 Год назад

Would love to see you guys design a upper oil pan with a gasket that won’t leak

@KAWABAGGER06 Год назад

Man you arent wrong. Ive had mine resealed 2 times since last summer

@nicholasross4379 Год назад

You need to replace the crankcase filter on top

@HSKFabrications Год назад

The 2011 pan has a machined groove with an o-ring. They fit all the 6 7s

@MYLOVEISTHEBESTTOME Год назад

where the bypass valve

@RealMrBen Год назад

Ill go with the adapter,. I can see higher flow for fuel, but oil? How is the oil pressure after install? I bet its lower, I got a work truck not a dragster. Do like how high it is.

@SPEMotorsport Год назад

The Dragster is used as an extreme test bed its not designed for that application. Oil pressure is the same, technically better because at higher volumes their is no pressure drop across the housing. We have been testing this for over a year in work truck applications with very good results.

@RealMrBen Год назад

@@SPEMotorsport would like to see that testing, maybe put it on the products page. Cant see how cat filter them self with there size not lower it enough.

@gliv2 Год назад

I have the unit in my truck, oil pressure is the same not lower. What I did notice is when a cold start up occurs, the motor warms up to operating temp slightly faster.

@jamesp982 Год назад

My next purchase

@jeradweeks Год назад

Price???

@SPEMotorsport Год назад

www.spemotorsport.com/collections/powerstroke-engine-components/products/spe-6-7l-powerstroke-oil-filter-housing-fits-2011?variant=41064949940335

@LoneStarViking90 Год назад

Now just out-do S&S and build a better CP4 replacement.

@KAWABAGGER06 Год назад

Im pretty sure the dcr will be a end all fix for the cp4

@jforu33 2 месяца назад

What about a flow back valve??... Gonna end up with a ton of seized engines..

@SPEMotorsport Месяц назад

Incorrect. We have every generation of 6.7 running this filter setup of our own. Some logging 50k miles (on this filter setup currently). No issues and no abnormal wear. Our test vehicles have a strict regimen and tests similar to what the factory does (including oil sample tests). Helps us ensure quality products.