@jasonmangila The high beam on the headlights are generally fixed. However, you still have the option to adjust them to the height desired. Thanks and good luck.
These also come with brackets that you needed to fit onto your vehicle. did you miss that? if anything, please review this video again to see if you have missed anything.
@jasonmangila Almost all the projectors have a screw in the back that can help you adjust the low beam. There will be either two or four. For up down left right. Please check with your selling to make sure. Thanks and good luck
apologies on that, you are correct sir. but unfortunately we do not have an aftermarket tail lights on our website so therefore we couldn't give you a correct answer. but yes, the only difference from 02-04 and 06-07 are the face-lifts and pre-face lifts. tail lights are about the same unless you are driving the wagon
@SuperRoscoe666 Sir, we do remind everyone that there is a separate installation instructions on how to wire your halos and leds, it is stated in middle of the video. our installation instructions do not provide that also.
this set is exactly what I want on my wrx, but after watching this video I see how much work is required. Based on my resources I know this would be a big pain and would just have to take it somewhere to be done for me.
This dudes video showed wayyy too many steps at the beginning, only thing you have to do to install the lights is to take off the grill and you can remove both headlights and replace them
Once you take out your old headlights you wont have the ballast anymore so technically you wont have the factory HID's anymore. So yes youll be fine with these headlights.
I agree.. I'm not ire when the previous owner pit these one but the lenses are yellowed and textterd. H1s are a pain to change.. why not just use the factory style bulbs
@Specdtuninginfo ok thanks also something i should of ask was about the high beams as well was, are these fixed like the stock assembly? not sure how high beams are aimed where your from?
I'm sure these will perform much better than stock, but aesthetically IMHO these are rice. the 3 LED's above the low and high beam? For what? And not 1 pair but 2 pairs of angel eyes? I've looked for a nice set of prjectors since 05' and I haven't found one yet
Great thanks for your feedback! Is there another hole for parking lights, because compared to factory lights again the parking orange light is located in that exact place where the indicator hole is.
Ok I'm planning in getting these lights for my 05 Sti. My question is my car comes with HIDS. What bulb comes with the low beam are they gonna be able to handle the power from my stock HIDS ?
NO, theres a reason why they give you a specific year because of fitment. The only way to actually make it fit is if you can convert your 02-04 to an 06 and rewire.
This may be a silly question but are these headlights more designed for LHD, RHD or can work effectively in both WRXs. I am considering these, but thought i'd ask first.
It depends on the Web sites you get them from, the one I got them from, since it was local to me sold them in RHD, so just check the description to be safe
I have just bought these lights,the leds dont replace the indicators if you pause it at 8.26 you can see the indicator holes in the far corner, I have silva tec bulbs which appear silver but flash orange
How does one go about replacing the 3 little led bulbs per headlight? What's the part number or bulb type and size? Tha j you. 2 of mine finally burned out
Hello! I have a question about the turn signals. On the OEM headlights, the turn signal is that orange section in the top middle. With these halo lights, the 3 LED's take the place of that section. My question is, are the 3 LED's the turning signal on these halo headlights? Also, will the turn signal with the new headlights be orange? In all the photos and videos I have seen, the 3 LED are illuminated white. Please let me know. Thank you in advance!
I bought these lights for my 2005 Sti, which was said was compatible with. I attempted to install and none of the plastic clips from the new headlights would fit with the ones on my car. Am I overlooking something?
Hi, The black and white cables are for the HALO and/or LED lights in the headlights. You would have to splice and then tap them into the corner light harness or low beam harness to the corresponding wires. The black/negative wire should be tapped to a corresponding negative wire in the harness and the white/positive wire should be tapped into the corresponding positive wire in the harness.
Can these housing handle 6000k Hid bulbs, I bought these and they came with hids and ballasts, and I'm curious if they will go good together and be able to handle it?
R Rod No HID's were installed. The headlights are equipped with H1 halogen bulbs. The high and the low beam are a simple plug and play. You will need to wire the halo and LED bulbs to your daytime running lights.
amazing how hard it is to find projector headlights for the 04-05 wrx WITHOUT those darn tri-LED things. AB-SOLUTELY ANNOYING. considering getting eyebrows with these. otherwise i have seen these as a great product! btw does anyone know what size HID bulb these take?
@@akidim13 Here's an update. The connectors are all the same. It worked on my TS. I did have to splice some wires but overall it took about 20 minutes to put both headlights in. The only pain in the ass was removing the bumper which is sadly necessary.
@@0yCrazyb cool bro I appreciate it , gonna get me them too, how you like them so far, also what wires did you have to splice ? Was it the daytime running lights one ??
