Join the Channel! / @speedysgarage
Parts Used:
Headlights: amzn.to/2X1Bam8
Side/Marker Lights: amzn.to/2tnX7hq
Electrical Connectors: amzn.to/2BtT33V
Projector: amzn.to/2N8tbze
Shroud: amzn.to/2TLYJ0g
Bulb: amzn.to/3NHdKyU
Ballast: amzn.to/2tlwKJe
Igniter: amzn.to/2Gmr8XP
Harness: amzn.to/2Goohxh
LED Halo: amzn.to/3NrCNVo
LED Strip: amzn.to/2Ea8akV
Power Probe: amzn.to/2UYvQ13
I needed to see the light, literally, and upgraded the old halogen headlights in Project SportRunner to modern HID projectors. It was a fun, but involved project.
Here are the parts and tools needed:
HID Retrofit Kit (Got mine from www.theretrofitsource.com)
Second set of headlights/marker lights (optional but HIGHLY recommended if cost effective for your application)
I added the butyl glue for headlight reassembly, but didn't need it. It's cheap so I'd have some on hand just in case.
Wax and grease remover, primer, paint, and clear for buckets/shrouds. I used Duplicolor products.
Red scuff pads
Weatherpak connectors (optional but highly recommended)
Work gloves
Razor knife
Putty knife
Scissors
Oven
Block of un-pressure treated wood
Plastic bags
Ratchets/sockets/wrenches in at least 8mm, 10mm, and 12mm
Flat head and philips screw drivers
Painter's tape
Acetone
Drill and 1/16 and 1/4 or step drill bits
Rubber gromets 1/4" size
Mesh and corrugated wire loom
Heat shrink
Plenty of zip ties
Self drilling stainless screws #12 x 3/4"
JB Kwik epoxy
Needle nose and wire cutters
Plastic clamps (optional but help)
Silver and black Sharpie markers or equivalent
Patience
Anything else I forgot :)
23 фев 2018
