SpeedyBee Bee35 Build - Part 1 - Motor, 35A ESC & F405 Mini Flight Controller Install

Подписаться 1,5 тыс.

Просмотров 9 тыс.

50% 1

This is the first episode of my SpeedyBee Bee35 Cinewhoop build. In this video, I go through the components of the build, installation of the motors, ESC, flight Controller, and battery lead.
If you would like to see the rest of the build, here is a link to the build series playlist:
• SpeedBee Bee35 Build S...
-- Components --
If you're interested in purchasing any of the components shown in this build, consider using my affiliate links below.
(I receive a small commission at no extra cost to you, and it helps me make more of these videos)
SpeeedyBee Bee35 Pro/Standard Cinewhoop Frame:
s.click.aliexpress.com/e/_mPF...
SpeedyBee F4 Mini + 35A BLHeli_S ESC Stack:
s.click.aliexpress.com/e/_mrV...
SpeedyBee 2006 1950KV Motors:
s.click.aliexpress.com/e/_mq5...
HappyModel EP2 ExpressLRS Receiver:
s.click.aliexpress.com/e/_mP9...
HQProp T90MMX3 Props:
s.click.aliexpress.com/e/_mLC...
DJI O3 Air Unit
www.dji.com/au/o3-air-unit
-- Bind and Fly Version --
If you like this cinewhoop but not interested in building it from scratch, you can buy the bind and fly here:
s.click.aliexpress.com/e/_mLi...
----------------------------------------
Contact me:
nxp200@gmail.com
If you like my content and wish to support me, please consider joining my patreon:
www.patreon.com/user?u=872035...
Fancy buying me a coffee if my videos have helped you?
www.buymeacoffee.com/nxp200

Опубликовано:

7 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@viinse1427 2 дня назад

Clear info! Thanks for the video

@betaodrone 5 месяцев назад

Hello my friend, your tip was very important for me to configure the OSD of my drone, big hug, we are together

@deaafrizal Месяц назад

great video! how u care about our ears, like u are not making the backsound louder than your voice, the background music & volume is perfect. that's why i subscribe you.

@nxp200 Месяц назад

Thanks so much for your kind words. I'm always trying to improve the quality of my videos for my followers 👍🙏

@deaafrizal Месяц назад

@@nxp200 i exciting to see how this speedybee build flight, will wait for it

@Sonic_Ox 5 месяцев назад

Very timely! I'm in the middle of this very build! A few minor differences but I'm looking forward to your configuration and tuning tips! Thanks for another great series! Happy flying amigo! 🍻

@stewartabel 2 месяца назад

Nice! thanks, i'm following your exact build 🙂

@BentRim 5 месяцев назад

I have all the pieces to put this build together. Looking forward to following along.

@manalive33 5 месяцев назад

Great video, waiting for my pro to arrive, and will be rewatching 👍🏾

@dronefilmsgermany 5 месяцев назад

Really detailed video. Can I connect the O3 without soldering to the FC?

@nxp200 5 месяцев назад

Not with the flight controller that is featured in this build series. The SpeedyBee F405 Mini doesn't have a plug for HD video transmitters such as the O3. You can only solder connect. You may be able to install with another flight controller that has a plug, but you'll need to research for yourself if it will fit inside this frame as I haven't tried with any other FC myself.

@flylion 3 месяца назад

❤Great video, is the power cable an XT60? As for the capacitor, I would like to know the voltage and capacity as well.

@nxp200 3 месяца назад

Yes. XT60 running 6S battery. Capacitor is 35v 470uf

@flylion 3 месяца назад

@@nxp200Thanks, What AWG size are you using for the power cable?

@betaodrone 5 месяцев назад

Hello friend, is there another type of engine that I can put in the FRAME spedebee 35, for example a 2300kv 6s engine

@nxp200 4 месяца назад

That might work, depending on the size of the motor if it can handle the prop weight. Given it is approx 15% higher in KV than the SpeedyBee 2006 1950kv, I would first try with a motor throttle limit of 20% and monitor the motor heat to ensure it doesn't burn up too much.

@zoeconner11 5 месяцев назад

Will anything else fit other than the 03 unit? I bought the frame but don't fly 03 unit.

@nxp200 5 месяцев назад

The "Pro" version of the frame has the aluminium bottom plate that is specifically just for the O3 Air Unit. The aluminium is CNC milled out to fit the O3 perfectly and I don't think any other VTXs can be mounted. The standard kit comes with a carbon fibre bottom plate that has mounting points for analogue and other digital VTXs. I'm in the middle of editing the next video where I install the O3 AU and while I was installing it, it looks like only slim "single PCB" style VTXs will fit if using the carbon fibre bottom plate. There's really not much room in there, given that the flight controller stack is right above the VTX.

@PatientZiro 5 месяцев назад

I saw on the net that walksnail 1s will fit there. I think many VTXs will fit in the non-pro version but for the pro version besides the O3 the Walksnail 1s also fit.

@ayronleandro 2 месяца назад

Hello friend, do you have a link for this screw?

@nxp200 2 месяца назад

If you're referring to the M2 set, here's the listing on AliExpress where I got it: s.click.aliexpress.com/e/_m0Z9Bu6

@zoeconner11 5 месяцев назад

Can I put 2004 2550kV on this? I have some motors laying around. Thanks

@nxp200 5 месяцев назад

I think those motors would be fine to put on this quad. You might want to run them with 4S batteries though, or if using with 6S, put a motor output limit on to ensure they are not over-run and possibly damage.

@adamseal 5 месяцев назад

did u got sponsored for that video?

@nxp200 5 месяцев назад

Nope

@wizzyfka5489 5 месяцев назад

Battery use plss?

@nxp200 5 месяцев назад

I'll be using CNHL Black Series 6S 1300mah and 1100mah

@wizzyfka5489 5 месяцев назад

@@nxp200 my motor is 1404 4500KV ang f4 mini flight controller esc 35A What battery I'm going to use I buy 850 4s 25c orange Ture or not

@nxp200 5 месяцев назад

The 1404 motor seems a little bit small for the Bee35 in my opinion, but may be able to take off and perform simple maneuvers. The 850mah would be a good choice or even a 650mah, since you'll be wanting to reduce as much weight as possible so the motors can handle it. Unsure what the flight time will be like though.

@wizzyfka5489 5 месяцев назад

@@nxp200 ok thanks