Spiderman Remastered PC Optimization Guide - Best RTX Settings for 60 FPS! 

*IMPORTANT:* With RTX or Upscaling enabled, always restart your game when changing settings! There's a weird bug where framerate will drop significantly once the graphics settings menu is displayed on screen. Yes, simply bringing up the graphics menu will cause the FPS drop. I can confirm that just today by simply toggling AO and framerate went down by 20 FPS, like really? 😐 I hope there's a patch to fix this but for now, always ALT+F4 after changing settings and then boot the game again. Just mash ESC and Enter once the game starts.

This was such a well made video, from voice over to the editing, it felt really professional, great job man , keep up the good work.

This was such an excellent and well-made video. Your speech and text on screen matched what you were explaining. Your voice was very clear, and the mic quality was fantastic. You had great comparison shots between different settings. And it wasn't over 10 minutes long. Just excellent. The only thing, I'd add are probably still shots of scenes with quick screenshot changes back and forth between differing settings to immediately see the difference between images. Also, the screenshot fade-ins are great as well. Excellent video. Professionally made!

ALSO IMPORTANT: If you are still confused with the RTX performance scaling, let me clarify further: 1. If you are GPU limited, (GPU Usage at 99 percent) Use RTX Set 1 - Reflection Resolution: High Geometry Detail: Very High. 2. if you are CPU bottlenecked, (GPU Usage is below 90 percent) Use RTX Set 2 - Reflection Resolution: Very High Geometry Detail: High. So it's not actually Upscaling itself that demands this reversal of RTX options. It's just upscaling gives you a huge FPS boost that it exposes CPU bottlenecks at higher framerates. Thus, using Very High RTX Geometry DESPITE only using High Reflection Resolution will give you worse performance because the GPU actually demands more load while the CPU is getting overloaded due to the Geometry settings being super CPU-intensive. And this why we should reverse the settings and transfer the load from the CPU to the GPU by switching the settings to Reflection Resolution: Very High and Geometry Detail: High. On the other hand, Digital Foundry's RTX optimized settings (RTX Set 1) is tested on a GPU limited scenario where GPU usage is fully utilized at 99 percent. This is actually the ideal scenario but if you want higher framerates, you can either use upscaling or reduce Reflection Resolution (which is GPU-intensive) to High. CPU-bottleneck is not an issue in this scenario that's why Geometry Detail is recommended to Very High. Of course, if balancing the RTX settings seems too much of a hassle, just turn them off for now to have peace of mind. Just wait for a patch to improve its current state.

Very good man. I was waiting for a video like this 🤝

I'm so happy to find this video, great job at editing the video with a voiceover, totally loved it!

Your tutorials are appreciated. You explain everytNice tutorialng so simply and show the fundantals of producing. Many people and myself thank

great guide dude thanks

this was super helpful ur amazing thank u

Well made video brotha! Keep up the hard work

Wow thumbs up 👍 before this my gpu runs like 70-80%++. Now its 98-99% thanks a lot for this setting!

Thanks for this! I was already playing with group 3 apart from having reflection resolution to high and geo quality to high, changed that to very high and left reflection alone, one thing I will say is make sure to restart the game lol. although this game has the feature to see graphical changes in real-time performance wise its costly I was stuttering when swinging after some changes, restarted and I'm swinging at 60fps constant. so make sure to just restart the game quick to get accurate stats.

great video, excellent attention to detail(pun intended lol), and very informative. Liked and sub'd.

Great video as always

Thank you, it's very helpful for me gudluck 🌹

thanks man. it really helps.

*UPDATE (09/01/2022): Version 1.831.2* is out: - Fixed issues that could cause negative CPU performance impact when using certain controllers. - Further visual finetuning of HBAO+. - Fixed an issue that could cause input loss after enabling Photo Mode during cinematics. - Sticker placement in Photo Mode is not constrained to 16:9 anymore. - Fixed an issue that prevented users from moving lights and stickers in Photo Mode in scenes where the player does not have control over the camera. - Fixed a crash that would occur on Intel Sandy Bridge and Ivy Bridge CPUs with ray-tracing enabled. - Added performance and memory use logging. *UPDATE: Version 1.817.1* is now out for PC and here are notable improvements: - Fixed various ray-tracing related crashes *(But Graphics Settings Menu FPS drop is still appearing)* - Improved Windows version check, to prevent false positives - Visual improvements to HBAO+ *(But SSAO still looks more visually pronounced and a better performance setting)* - Fixed the issue where ray-traced reflections in stainless steel were rendered distorted - Various visual improvements to NVIDIA DLSS - Fixed an issue that could freeze the game if the player would switch between graphics presets during cut-scenes - Fixed an issue where the Side Mission popups would be stretched when playing in a widescreen resolution - Improvements related to stability issues when using Alt-Tab - Fixed various visual glitches *UPDATE (08/25/2022): Version 1.824.1.0 is now out and here are the patch notes:* -Marvel’s Spider-Man Remastered v1.824.1.0 Patch Release Notes -Added sharpness sliders for NVIDIA DLSS and AMD FSR 2.0 upscaling. -Added a sharpness slider that controls in-game sharpness. -Added an option to force the aspect ratio to 32:9, 21:9, etc. -Finetuned the spawn rates for Crowd and Traffic Density settings, to better reflect various modes. -Implemented a fix for a bug that turned objects into spiked distorted geometry. -Fixed white artifacts appearing around buildings while swinging trough the city. -Fixed various ray-tracing related crashes, including a crash that would occur when enabling ray-tracing on PCs with Intel Ivy Bridge CPUs. -Various visual fixes related to ray-tracing on the Very High Geometry Detail setting. -Fixed a bug that prevented some players from progressing in the Spider-Hack mission. -Fixed black blobs and sparkling pixel artifacts on characters when using Dynamic Resolution Scaling in combination with AMD Radeon GPUs. -Enabled Gyro Aiming on Steam Deck for Black Cat Stakeouts and interactable objects. -Various UI fixes for Steam Deck. -Fixed an issue that prevented the game from launching when the installation folder contained non-Latin characters. -Improved field of view and cinematic blur transitions. -Improved error handling when Controlled Folder Access prevents the launch of the game. -Various visual fixes related to ultrawide aspect ratios and multi monitor setups. -Various fixes related to mouse and keyboard controls. -Stability fixes related to Dynamic Resolution Scaling in combination with AMD Radeon GPUs. -Various stability fixes and improved logging.

thank you so much .. nice work 👍

I would switch between 2nd and 4th and choose one which is more appealing to me , Btw Thanks For this as there are very less who made an optimization guide ✨

Im struggling to find the right preset. Which option u guys like the most: - 4k, max settings, no RT, DLSS Balanced 60 fps - 4k, mid/high settings, high RT, DLSS Balanced, 40-50 fps Is it worth enabling RT?

Just in time Tnxs

we have the same exact specs so this will be useful thanks

Such a thorough video!! Really appreciate all the work you put into it! Plus I've been going through the other comments, you seem very knowledgeable about the topics being discussed! I've got a Ryzen 7 3700x with a RTX 3070, gonna try Set 2 when I reach home, last night the game was fine for the most part but diving down towards the street, and some street level swinging in general had frame drops.

Idk if I missed it, but the RTX settings, what resolution did you use? Because I have a similar set up, but I have a 5800x and I struggle getting to keep it at 60fps.

IDK, the I5 10400 with 3070 doesn't do much as your video. As i turn on DLSS, the FPS got worse, and toggle between RT setting didn't made GPU and CPU's ultilisation higher, but mine got between 80-99% all the time so i guess that all my pc can do.

Windows 11 22H2 has made this game run with very low CPU usage on my rigs (5800X and 6700XT + 5800X3D + 6900XT) whereas it used to be 60 to 70 percent usage on the CPU it is now 4 or 5 percent for the same performance.

I have a 3080 but probably would still go for group 3, just as a little buffer for some heavy load moments where I dont wanna dip below 60fps

I’m getting 100+ fps max settings no dlss at 1440p but the game looks really dark for me and really sharp and blurry at same time

enabling ray tracing on my 5900hx 3070 laptop makes the gpu usage low around 60-70% and frames drop below 60 and hover around 40-55 when swinging around the city.. with ray tracing off i get 70-100 fps maxed out.. it's really sad since the game looks really pretty with rtx on

i have the same cpu and a 3070ti yet my gpu usage never stays in the 90s with preset 3

really needed a video like this, I have a 3080 ti paired with a 5800x and had a lot of moments where the fps would dip in the 40s or the 50s when swinging through the city (with rt). Gonna try group 3 tomorrow and see if it helps

For me it just depends on the location sometimes i got high gpu usage and sometimes i got high cpu usage

I tried this non rtx settings (1080p) on my rtx 3060 now the game looks much more beautiful. Also I choose dlaa

my gpu usage is 90% but my cpu usage is always 5..does it cause FPS drop how toincrease my cpu usage also

Got same setup as you, just lower Mhz Ram (2400, I know will upgrade soon) and Sata SSD, My fps tanks on RTX settings (20-30, sometimes 40-50), On optimized settings with no RTX I get around 70-80 with drops till 40. Is this a Defective GPU issue? Or should I upgrade my Ram and SSD asap? Edit: Just read your pinned comment, it's the bug that is making the drops. Will still upgrade tho.

I'm running a Ryzen 9 3900X 12 Core and a 3080 RTX I hope I won't have or see any problems.

Any help guys? Am using rtx 3070ti and ryzen 5 5600x My gpu will drop to 50% (this game only) I have tried both set ups

Hello, I used the recommended settings (3) but I still have significant fps drops 60 to 45, but more precisely when I jump from building to building and fall towards the road. I have an rtx 3080, 16gb of ram 3200mhz c16, and an i5 10400f and I play in 4k I don't understand do you have any idea?

I’m so confused because I’m “bootlenecking” when I swing primarily and it’s my memory that’s maxing out not my cpu or gpu what should I do? I want the benefits of ray tracing and up scaling I just don’t want to keep stuttering like this

I’m surprised you’re able to have crowd and traffic levels at high. My Ryzen 7 3600X is struggling when swinging at street level. I also have an RTX 3060 so it’s really off putting knowing I can run this game if it had proper optimization and less CPU intensive

My pc has a gtx 1650 super, ryzen 5 2600g, 8gb ram but lagging and stuttering in lowest settings, can you help me?

I have a Ryzen 5 3600 and a RTX 3070. My GPU usage is ~60% and CPU stays at ~75%. Am I CPU bottlenecked?

Q: If I buy today, do I still get the free expansion or suits that comes with pre-order purchased?

I have a Ryzen 5900x and 3080 (really not meaning to brag), but I've actually dipped below 60 fps on occasion swinging through the city. I can never seem to hit those FPS marks you are. I'm following the RTX Optimized settings. I don't know if the game just has poor optimization and needs to be patched, or new drivers need to fix this, or if my CPU is just too weak or what. But it doesn't seem to be able to handle it with RTX on. Off though I easily sail through at 120 FPS no issues. So yeah, not sure what to do here. Should I just disable it and hope for a fix? Or is there an issue on my end?

Hi, I have I9 9900k and RTX 2060 super but for some reason My GPU is only utilized at 50 to 60% and CPU at 30 to 48%. I tried lowering down all the settings yet the same result. Any thing you can recommend me to fix this issue.

Hello, i have an msi laptop gp66 with i7-10750H and rtx 3060 laptop gpu and 16gb ram, game runs nice but i think that my laptop can run it better. my gpu usage is 40-50% , my cpu usage is 20-30% while im playing and i have 60-90fps in medium - low settings. Today i tried playing this game in high setting and my fps where 55-60fps very stable. I don’t understand why it runs in low at 70 or 90 fps, maybe the laptop isnt using all the gpu performance . Can anybody help me please. Thanks🙏🏽

hello I have an rx 6600 and I have many fps drops the graphics never reaches 100% of use it stays between 70 and 80% what do you think it could be? i have a ryzen 7 2700

Can someone pls help me. I'm getting between 60% - 70% GPU usage which seems to be not normal. I was getting around 90% percent until my AMD chipset driver was updated not sure if that's the issue.

I have RTX 3060 Ti with 32 ram( lenovo legion 5) , which group would you reccommed for me?

Cant change upscale quality! Why?

which software are you using to show FPS, CPU, GPU, etc?

I have a rtx 3080 and literally no Performance Chance between native 1440p and dlss upscaling. Is this a Bug?

Do your settings still apply since the new update on Aug 25th? There are dlss and ray tracing improvements.

is it good settings on gtx 1650?

I have a ryzen 9 5900x and a 3080 but while in open world my gpu stays at 60% usage and and like 55 fps, in cut scenes it works fine, it spikes to 95% on average and and I have like 100fps, this is so frustrating, does anyone know why my gpu usage is so low in the open world?

Can anyone explain the ghosting when hes breathing at like 1:45 i see this in my game too and it annoys me

I have mp3 format s and i want to make it puncNice tutorialer plzz help buddy

The game is still laggy and skipping a lot for me. I have a 3060 ti and have fooled around with the settings several times and nothing seems to help.

thanks for the video.i have an issue.i have a rtx 3070 too and ray tracing setting is totally off in setting.i cant on or off it do you know this problem?

you are hammering your cpu with very high lod + weather particles. use high preset + very high TQ + 16x + DLDSR + DLSS Quality for best picture quality. turn on RT if you've got spare perf.

RTX 3080 5900X No matter what I do I cant get the GPU to give me more then 50-60% RTX on CPU-90-97% GPU 50-60% RTX off CPU 80-90% GPU 60-70% Any ideas?

i have i59600kf with rtx 2060super and 16gb ram the cpu is in 90% usage but my gpu is in 30%-40% usage can u help me ?

Gtx 1060 3gb with i5 7400 is it bottleneck :((?

Buildings far off wont render properly for me for some reason, any idea why?

My rtx 3070 using for 75% why??

Bro I'm having significant frame drops when swinging 40 to 45fps even on low setting RT off , TAA and no upscale. Rtx3060 i5 11400f 16gb 3600mhz Is my CPU not enough for this game? 🤔 🙃 All I want is 1080p 60fps with no RT

I turned off the ray tracing and the game wanted to fly XD

Thank you for the tutorial, because of you I'm getting 60 FPS with everything set on very high with my 3080

how to disable Raytracing if the game does not start? When I try to start the initial app, it gives Directx 12 error. :(

Do I have a problem? All of the examples looked “almost” the same… :/

It's 4th one for me

My pc settings everything on low 😅

Bro i have 1650ti ryzen 5 and my laptop is 8gb ram is this enough for run this game?

I wait the snow mod this game.

mine too

This game is very cpu intesive.

I paid for the tensor cores I will enjoy the tensor cores

my 3090 R95900x struggles to keep a constant 60 or above on RTX with no upscaling (yes I am aware of the graphics menu bug thanks to you). Feels really shitty to get 20 less fps on a 3090 compared to your setup.

Did I miss the place where you told us the Res you are running. I game at 4K so you need to mention this shit!

Can i use dlaa in amd gpu

蜘蛛人的光追效果不好，沒開RT也沒關係。

When you're CPU usage Goes past your GPU usage that is a Bottle neck And this does not matter What your usage percentage is at As soon as the CPU usage passes the GPU usage bottleneck

dad

your indepth level of optimization is bar none, most other optimization guides just set everything to low, 🤣

Just buy a 3090 lol Problem solved

I have a 3060 ti and using Upscaling Decreases my Gpu Usage while Playing with no scaling increases it to 90-99 most of the times , All of these are with RT on. On RT off the usage is near to 50-70 On I5 11400f , The bottleneck is crazy on this game🥲