This video goes through the modifications to the Spirit Halloween Proton Pack, and where each piece goes from the spongefacemcgee kit on eBay. Mods can be found here: www.ebay.com/u... Music courtesy of bensound.com
Hi man , Your Protón Pack is the one of my dreams , Really good Job! I was wondering if there is a way to plug my smoke machine into the pack , for when the vent sequence starts, the smoke also starts. Thanks. PD: Please make the video about the wand :)
Any tips regarding how to install the ghostlabs42 wand upgrades? I installed the pack lights and soundboard but am a little nervous about the small cuts required to make the vent holes, add the switches, LED, etc…
Hello it took a long time but I recommend a cordless Dremel or similar tool to hollow out the vent holes. Then I used small hobby files to round everything out. I really need to make a wand video for everyone out there. I’ll try and get one done soonest.
Love the videos man, would you happen to have all the links to these items of the products to upgrade the spirit Halloween proton pack. Both the pack and the wand. Please can you send me them. Thanks and much appreciated 👍🏻👍🏻
They attach to a portion of the wand which you have to take apart and drill some new holes into. They other end attaches to the inside of the proton pack with a nut, screw and washer. His kits come with everything you need to attach it.
Are you referring to test mode in the pack board, or in the wand board? There are two different boards, one in each. There is a jumper on the printed circuit board in the wand, it says TEST. It needs to be set to open, in other words don't have anything connected to it.
If it's the board in the proton pack itself, there is a jumper on the board which says TEST. Make sure that the jumper is not covering both pins. If it is will be stuck in test mode.
I was trying to remove the sounds completely from the default pack so I can just have the lights, would I just disconnect the speaker or would I have to do something else?
Im modding my pack its almost dome i just dont have lights but i only need pack lights no wand kit lights or sound just lights and id prefer if it was battery operated do you know any lights that are like that ?
@@suzyorosco2642 Which trigger are you referring to? The Activation button? That needs to be hooked up the board in the wand. Also make sure you didn't pinch the wires when you installed it or damaged the wiring there, it's a really tight fit that requires some holes and filing.
@@superactionguy6000 the firing trigger was working on the wand and turning the sound on but now the sound or trigger doesn't work. Is it possible that the speaker shorted out.
hello I see that you have the same electronic kit as me I plugged them in last week and then I walked with the lights and the sound bug and the indicator light on the sound card is blinking can you help me please
Did you install both the pack lights kit and the wand upgrade kit? If so, it sounds like it's in test mode. That means you have the jumper in the wrong position on the board. See this link for details about how to exit out of test mode: www.ghostlab42.com/img/Spirit_Wand/SpiritWandLights_v1p1.pdf
Bought it on eBay... see link: www.ebay.com/sch/sis.html?_nkw=Rothco+ALICE+Pack+Aluminum+Frame+With+Attachments+20%22+-+Fits+GI+LC-1+Packs&_id=202637137676&&_trksid=p2057872.m2749.l46251
www.thingiverse.com/thing:3617829 Also, I had to change the print orientation since the first time I printed it with PLA it broke when installing the battery.
