Splatrball SRB400 vs SRB1200 Gel Blasters - What's the difference between them? Which one is better? 

Thanks 👍

Good to know. My SRB400 was purchased around February, so they changed the battery sometime since then.

Both have had 7.4V 1800 mAh Li-Ion batteries since they started. Strain reliefs were added to 400 cable connectors later.

@@engineerablecan you take the tip off of the SRB1200?

wait WHAT

@@ChaoticMarioBros_YT yes they had the srb at Walmart for 40 them it went to. 80

:O it was 40 dollars??!?!??

I just paid 81$:40

OOOOOOOOOOOOMMMMMMMMMMMMGGGGGGGGGGGGGG

It's not a durable blaster. I haven't had a lot of issues, but many people have. I think a lot of problems are caused by shooting full auto for too long periods of time. So keep your shots in short bursts.

That sucks! I doubt Splatrball will sell with metal gears. Gel blasters or airsoft guns that come stock with metal gears cost $200+ I believe that the reason the gears strip so quickly in Splatrball is that they don't have the motor adjustment screw that pushes the motor into the bevel gear for proper engagement. Here's my metal gear upgrade, but ain't for the faint of heart - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3o4r5-Xr93U.html

I got a higher power battery on mine and it’s fine

@@engineerable what splatter gun with metal gears would you recommend & where can I purchase one?

Nice!

😂, you still can link it for those who haven't seen the tracer mod ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c3-62DxvW4A.html

@@engineerable Does the splatrball gun shoot more accurately than the UnlocX gel blaster gun? And does it shoot more accurately ONLY in semi-auto mode or does it shoot more accurately than the UnlocX in auto mode as well?

@@qlixte1896 Splatrball sucks in semi auto. Before buying one, I thought semi auto would be preferred mode, but with Gel blasters, it's better to have it on full auto and shoot bursts. UNLOCX has comparable accuracy and FPS in pistol mode, which is cool because it's a much shorter gun.

Tbh single shot mode sucks. It often shoots 2 at a time, which reduces accuracy. If I want to shoot one shot, I usually leave it on full auto and just quickly pull the trigger. It works better than single shot.

@@engineerable ya thats true I was thinking about that and if I'm in a fight or something with my friends im more than likely not gonna use a single shot

@@ConnorStizzy Plus with Gel blasters relatively poor accuracy at a distance, you need to fire bursts in the hopes that one will hit.

Performance is basically the same because they use the same gearbox and barrel. SRB1200 has slightly faster rate of fire, probably due to the elimination of the single fire mechanism.

@@engineerable thanks

Cool, working on it, stay tuned!

Yes thanks

P

This would be a well loved video

Plz

They have the same internals, equal fps, so...

"cheap" blasters won't last. SRB400 is ok, but UNLOCX pistol is better and less expensive.

@@engineerable ok thanks I will look into UnlocX instead of SRB

@@engineerable also does the unlocX work with other gel balls ? Or only unlocX ones?

@@pocoyo.4 Any 7-8 mm gel ball will work.

@@engineerable thanks soo much your the best , I’m buying my UNLOCX pistol this week! 😄(most of my friends told me to get a SRB 400 but know I won’t, and. I’ll beat them)

Srb

Srb

Yes, they are cross compatible

@@whatthefunyuns no, the mags are not compatible with Hydro Strike

@engineerable but they look like same shape as my pulsar pro mag

Do you have a pulsar pro

Yes, working on it, stay tuned!

LETS GO V!NCE ARMY

What's wrong with it?

Yes, I did it. This is how ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qQKaKdEUPCs.html

And here's part 2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lKiQMAdOd2E.html

Splatrball sucks in semi auto. Before buying one, I thought semi auto would be preferred mode, but with Gel blasters, it's better to have it on full auto and shoot bursts. UNLOCX has comparable accuracy and FPS in pistol mode, which is cool because it's a much shorter gun.

@@engineerable So having the longer barrel attachment equipped on the UnlocX makes it less accurate, but taking that off so the barrel becomes as short as possible makes it comparable and similar to the splatrball gun in accuracy? Does the longer barrel attachment really reduce accuracy that much? Or can it be negligible?

@@qlixte1896 The barrel extension does reduce accuracy. The problem is that the extension has a much larger ID, and therefore the air can flow around the gel balls and the balls can roll along the wall creating an uncontrolled spin. The gel balls spin off all over the place when the extension is on. Cylinder volume to barrel length ratio, and gel ball spin (hop up) are the factors that affect accuracy more than barrel length. I will be modding the UNLOCX extension with a hop up, and that should prove accuracy.

@@engineerable Is the brand of the Gel balls I'm using for the Unlocx a huge factor that affects accuracy as well? Thanks to you, I now plan on getting 2 UnlocX guns but I don't know if buying cheap off brand Gel balls instead of the UnlocX branded Gel balls for my ammo will make the gun shoot the cheap off brand balls less accurately. Have you ever used off brand Gel balls? Is there even a difference in accuracy at all?

@@qlixte1896 Most of my testing has been done with the stock UNLOCX gel balls, which are average/cheap quality. Hardened gel balls usually improve accuracy, range and reliability.

Probably 🤔🤔🤔

They hurt the same. They have the same gearbox.

Lol, usually you buy a replacement "hopper". They are basically universal with all those top load hopper designs

It's not orbeez, they are too big. Order 7-8mm gel balls

Just get splatterball ammo it’s cheap, you can get 20,000 rounds for 10 bucks

@@MoneyIVI It is cheap, but it shoots way better with hardened ammo

Yes, turns off after a minute or so to prevent battery drain.

They shoot the same FPS because it's the same gearbox and spring. The SRB1200 shoots a little bit more rounds per second.

@@engineerable okay thank you so much I just got my srb1200 I put my orbese in water and they don’t look big they grew but I’ve been groins them for about 10 hours or more and they still havnt gotten bigger can u do a video of showing the orbese close up please I want to know what size they should be

@@parkbabyjose7545 7.5mm

I show a list of reasons at the end of the video why the SRB400 is the overall winner.

In this price range the UNLOCX pistol blasters are the best blasters.

@@engineerable can you send me an Amazon link of the best weapon and that it hurts a lot and that it goes far please

@@carlosflow6988 you ever find which blaster has the best accuracy and pain ratio

Neither is durable. They are just OK and you can have lots of fun with them. Expect to spend $150+ for something that shoots harder and is more durable.

@@engineerable can it shoot around 500k rounds without breaking?

@@eliprather3941 probably not. I would expect about 100k rounds. I'm building a test fixture to test gel blaster life span before something breaks. That way we can compare the durability of all blasters.

Ok, is their any budget blasters that are more reliable than the srb400?

@@engineerable what suggestions can you offer for great durable gel blaster for $200 ++? And where can I purchase the hardened gel balls for them?

I think I compared them before and they were the same length. Will have to double check that.

Yes, but you have to use the glow mag or do a glow mod.

Yes

I will be doing giveaways eventually as I accumulate too many blasters, so stay tuned. Also, I only have one SRB1200, and need to keep it for modding.

@@engineerable oh that’s ok I was just asking because I don’t have much money and I was asking when we’re you doing a give away or are you doing one for the srb400?

The trigger switch contacts are probably wearing out. You need to replace with a MOSFET before the contacts are completely bad.

Don't know how

Can you help me

Yes

I bought another SRB400 recently and also noticed that they change to the new battery.

My srb400 doesn’t come with the troubleshooting hole like the old model

@@__.VEX.__ believe it or not the new models have the hole, mine came with the new battery and the troubleshooting hole

@@__.VEX.__ It seems that some blasters come with or without the hole, but just because it has the hole doesn't mean that there is an adjustment screw.

@@Omega-uj6qz Does it have the adjustment screw inside. I noticed that some do not have the screw even if the hole is there.

It's the same, since they use the same internals. SRB1200 shoots a bit faster

Hurts the same, since they use the same internal parts

You must have gotten lucky. My Lightning Blaster G36 shoots under 200 fps

Came with a drum mag? Where'd you buy it?

I got dat trust me

Whitch 1

@@cxmpkev1066 glocc19 gen 3

I don't care you married a goat 🐐 😂

@@engineerable did u do that on purpose cause I see Marie da goat😭😂