Как чистить аэрограф @Gexodrom

Spraying with the NEOECO NCT SJ83

Глеб теперь знает движения! #iribaby #shorts

СКОРО ЮТУБ ЗАБЛОКИРУЮТ! ПРОЩАЕМСЯ

Олимпиада провалилась, даже не начавшись! Зачем парижане массово саботируют игры?

Воскресный утренний стрим!

Spraying Acrylics with a NEOECO Airbrush

GrandpaMark's Hobbies

Подписаться 5 тыс.

Просмотров 10 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Spraying Acrylics with a NEOECO Airbrush
When I got my new NEOECO airbrush and realized how easy it was to do great work I decided to do a How Too video on using it. Well, a little while ago the kind people at NEOECO contacted me and asked if I planned on making that video. I told them I was, and they said they would like to send me a few things to use in the video. They quickly sent me a NEOECO compressor, cleaning pot, and cleaning supplies and tools. Now I am not one to promote anything that I don’t like, so I tested the compressor and was very happy with it.
Now it was time to get down to business and make a video.
I used Tamiya’s Acrylics because that is just about the only paint I use.
I also used Tamiya’s Acrylic thinner and Tamiya’s Retarder.
I always start out with 2 pipettes of paint and 1 of thinner. Then I always add 13 drops of Retarder. This is when I give everything a good stir and see where my mix is. I am looking for a thin milk almost water consistency to the paint. In the video you can see I had to add just a little more thinner.
Then I set the compressor on high (green) and did a spoon test. I liked the way it was spraying so I went ahead and sprayed the roadster body.
After that it was cleanup time and with the cleaning rags that NEOECO adds to the compressor cleanup was easy.
I hope you enjoyed the video and I hope it helps.
Here is what I used.
Gaahleri Airbrushes' and supplies: www.gaahleri.com/?ref=Grandpa...
NEOECO Airbrush
www.amazon.com/NEOECO-Multi-P...
NEOECO compressor (This is on aliexpress.us and is a legitimate site given to me from NEOECO)
www.aliexpress.us/item/325680...
Tamiya Thinner
www.amazon.com/Tamiya-81040-X...
Tamiya Retarder
www.amazon.com/Tamiya-America...
Airbrush Cleaner
www.amazon.com/Master-Airbrus...
Pipettes
www.amazon.com/gp/product/B01...

Опубликовано:

26 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@SuperTexasBlues 2 месяца назад

budget hints... always helpful... SUBSCRIBED

@grandpamarkshobbies 2 месяца назад

Thank you very much. I try and keep most of my builds on the cheap, but with as much detail as I can.

@65marlin327 Год назад

I bought two of those. They're amazingly packaged with all those brushes and rods, but also spare O-rings, three sizes of tips and needles, three cups, the quick connect, long hose, and more! ALL for around $40! Very impressive product, and their product support is second to none, too. Thanks for the video.

@grandpamarkshobbies Год назад

Thanks for watching. It is a fantastic deal for sure, and my dealings with them have been amazing. I honestly think they really care about their customers satisfaction and they want to make sure you are happy. That is a rare thing anymore.

@billh3-21 6 месяцев назад

Thanks grampa, just got my air brush. Thanks again.

@grandpamarkshobbies 6 месяцев назад

Oooo good. I hope you like it.

@Karmann63 Год назад

Hi from Norway. I am a grandpa too 😂Great video! You have a very nice voice to listen to and you speak very clearly. Keep up the good work 😃

@grandpamarkshobbies Год назад

You just made my day. Thank you very much.

@rickswindell806 3 месяца назад

i used an airbrush about 30 years ago and painted fishing rods. then haven't used it since. forgot about it till now. then just purchased a nedeco and was having a lot of trouble with it paint not flowing etc. after watching you video, i saw several things i was doing wrong. thanks, great video, and very informative.

@grandpamarkshobbies 3 месяца назад

Thank you very much. You just made my day.

@RobFerrellDrumStudio Год назад

I always wanted an airbrush when I was building models! I still remember how much difference swapping to spray paints made. I can only imagine how much difference a legit air brush like this would make!

@grandpamarkshobbies Год назад

When I was young I had no clue of what an airbrush was. LOL I would be happy with a kit after I used a gallon of Testers paint and an old craft brush. LOL Now with this thing I can put down the paint so smooth. What a difference. LOL Hey, have a great weekend, and thanks again for watching.

@NEOECO-Airbrush Год назад

Thank you for the so detail video. Enjoy it indeed. And it can help a lot of people who just entering airbrushing world and wanna enjoy that. Thanks!

@grandpamarkshobbies Год назад

Thank you very much for watching. I can't tell you how impressed I am with this airbrush. I've used some VERY EXPENSIVE airbrushes that friends have, and are way out of my price range, but no kidding, this airbrush is just as good as them in every way. I've painted 5 models with it now and it's done a great job for me every single time. I love it.

@dvl9532 3 месяца назад

Great video and a splendid brush up on brushing😂 THANKS!

@grandpamarkshobbies 3 месяца назад

Thank you very much.

@robertlafontaine4238 Год назад

Excellent video! Thank you!

@grandpamarkshobbies Год назад

Thank you very much. Thanks for watching.

@ModelCarMinion Год назад

Great tutorial, covered a lot of issues that are good to be reminded of.

@grandpamarkshobbies Год назад

Thank you very much. I wanted to cover as much as I could, but didn't want to get too heavy with it. If that makes sense.

@alancyr3100 Год назад

Great tutorial! Looks like a great option for the beginner or the occasional airbrusher like myself. I like it. Thanks for sharing.

@grandpamarkshobbies Год назад

Thank you very much for watching. I hope it helps

@kyledehartsscaleworks Год назад

Just catching up on videos after my week at the racetrack. Great tutorial. Neat little compressor. One of my airbrushes is the neoeco and I really like it. More than worth the price.

@grandpamarkshobbies Год назад

It sure is. Love it.

@michaelcooke2559 Год назад

Very nice video. This product looks really nice. It seems to be a well thought out item. Definitely worth looking at purchasing. Thanks for sharing.

@grandpamarkshobbies Год назад

Thank you very much. It works great. I would recommend it.

@markellison1364 Год назад

Very informative video. I also clean my airbrush like you do at they end of my spraying session.

@grandpamarkshobbies Год назад

Thank you very much. I've finished my sessions like that for years and have never had any major problems with my airbrushes. It just pays to do it that way.

@sauloteixeira07 6 месяцев назад

Thanks for the review! I have one big compressor for general purpose. I feel like I'm in some sort old boat motor room when that thing is on. 😂😂 At neoeco's level of noise, I can even paint during the night! Certainly, will buy it next month. I'm quite low on cash right now. 😅

@grandpamarkshobbies 6 месяцев назад

I've found that it does not like to spray Vallejo primers. But it is crazy quiet and if your paint is thinned right it works well.

@sauloteixeira07 6 месяцев назад

@@grandpamarkshobbies I use mostly some local standard hobby paint. But I do have some vallejo on the bench. Glad to know it beforehand. Thinned down paint and some patience can get us far.😂😁

@grandpamarkshobbies 6 месяцев назад

Yes sir.

@johnmulligan9299 6 месяцев назад

very professional.

@grandpamarkshobbies 6 месяцев назад

Thank you very much.

@pguerracs Год назад

I think that the moisture traps intake is the clear side and the output the metal side. The way it's install the flow is revers.

@grandpamarkshobbies Год назад

There is only one way to thread it onto the unit and the hose. Input is Female threads, output to hose is Male threads.

@pguerracs Год назад

What I see around it is attached to the airgun

@grandpamarkshobbies Год назад

LOL. You got me there. I'll switch it around next time I use it. That will just be a bit bulky to hold.

@jeffreyn.greene6233 Год назад

Great video. I think you have solved a problem I have been having with splattering.

@grandpamarkshobbies Год назад

Thank you very much for watching. I'm so glad I helped.

@Leadfootkurtis Год назад

My kiddo is a super awesome artist and he has been talking about getting an airbrush and this set up would be perfect. Performance and design seem top notch sir.

@grandpamarkshobbies Год назад

It is an outstanding kit. I've been able to lay down some great work with it. I'm not sure if you've looked at it, but it comes with a whole set of replacement O rings and Teflon guides. It also has 3 cup sizes, a quick disconnect, long (good quality) hose, air separator, cleaning tools, and 3 tip sizes. For $39.00 it's a crazy deal. (and I'm not even working for them) I'm just really happy with the airbrush.

@Leadfootkurtis Год назад

@@grandpamarkshobbies I’ve looked it up and I’m surprised at the deal and it’s a quality airbrush, not harbor fake junk. They carry replacement parts also. At that price I should get one for my kiddo and myself lol 😛

@grandpamarkshobbies Год назад

I agree. I was surprised that it came with all the cleaning tools, and replacement o rings too. I am very happy with it.

@birddoggsboneyard Год назад

Great vid as always😁 I got one of these a while back after watching a review from Barbarossa Rex ? I just love this airbrush, I like that it has a Mac valve on it for easy adjustment. I only got the brush, didn’t know they had a mini compressor, just used my old compressor. Goes great with my Gaahlari .3 one🤪

@grandpamarkshobbies Год назад

That is were I saw it first, and had to get one. I love it.

@tonybear7071 Год назад

thx for this I will give it a try soon

@grandpamarkshobbies Год назад

Thanks for watching. I hope it helps.

@geoffhipwell2198 Год назад

Impressive!! I've gotta get one for myself. 👍🦘

@grandpamarkshobbies Год назад

Thank you very much. I really like this airbrush. It's so much easier to use than my old one. And if you get the one that comes with the compressor you will like that too.

@WhiteTigerFire 10 месяцев назад

Thanks For Teaching Me Some Stuff Like it alot .S Baum...

@grandpamarkshobbies 10 месяцев назад

Thank you. I'm going to be doing a few more airbrushing videos here real soon. With much better filming quality.

@billaicklen9914 8 месяцев назад

Like your style - great video! 44:51

@grandpamarkshobbies 7 месяцев назад

Thank you very much.

@patrickwells8302 Год назад

I am impressed with the compressor. I will look into those wipes as well. I have not seen those before. looks to beat paper towels by a long shot. Thanks for the video.

@grandpamarkshobbies Год назад

I am going to write NEOECO to see where I can get them. They sent me a link to where to get that compressor. They didn't think they would sell in the US. I think the response here has shown otherwise. I'll update the description with the new links as soon as I get them.

@patrickwells8302 Год назад

@@grandpamarkshobbies I donated one of my old AB to a friend but now they need a compressor. I thought this looked like a good one to get them started. the link you have here is the only place I have seen that particular compressor listed for sale. Thanks again

@grandpamarkshobbies Год назад

I'm so glad I could help. Thanks again for watching.

@Bruces-Eclectic-World Год назад

Well that was a nice refresher for me on how to paint after 4+ years... Thanks and I will try your method and see how it goes. I have never used retarder(I'm a bit a retired. lol) in my paint, if memory serves I used floor shine as a lever and window wash as a thinner... Lol I looked for that air pump and did not find it with that name. I did find a kit that has that pump but did not like the brush. I have 2 brushes and don't really need another one. My homemade fridge air compressor is quite but takes a while to fill the tank but it does work great. Anyway thanks for the video! LLAP 🖖

@grandpamarkshobbies Год назад

Bruce, I use to use Pledge back in the day, but the Tamiya Retarder doesn't change the gloss like the Pledge did. The NEOECO group is going to be putting up a website soon and I'm hoping they will be offering that compressor there. It will be a great help for people who are just getting into the hobby or for people (like me) who have limited space. But I sure do like that airbrush. It does such a better more consistent job than my old one. Thank you very much for watching, and have a great weekend.

@Bruces-Eclectic-World Год назад

@@grandpamarkshobbies I did order the thinner and retarder Mark on Amazonion to give it a try. What can it hurt right? Lol Have a great weekend as well. I just seen Jake in the pump video. He looks awesome! Buster (In the Pic) pasted away Dec 10th 2021 and I still have Tip he is 12. I started the channel with Buster & Tip in mind when he was still alive not knowing he would be gone soon. He was 17 on his passing but full of life as a new puppy, just his body gave up like ours. 😥 So now the channel is in his Honor. I do miss him so much still but one day well be together again... 🙏 LLAP 🖖

@CassidysWorkshop Год назад

I caught this over on the Neoeco site, and since I have one of these (love it), thought I'd come back here and catch it directly from the horse's mouth...so to speak.

@grandpamarkshobbies Год назад

Thank you very much. I'll have to jump over there and check it out. I do love that setup.

@CassidysWorkshop Год назад

@@grandpamarkshobbies Have you found a place to order their Airbrush Wipes separately? I've been looking unsuccessfully so far. I had used Artool Studio wipes, but my box of them is starting to dry out, and I'd like to try these next. I've sent an email to the address in the description in their video How to clean the airbrush? -- Beginners' Guide using your video, but haven't heard back yet. Guess they're still working on their website. Great tutorial video as usual.

@grandpamarkshobbies Год назад

I sent them an email, and they will be sending some to Amazon as soon as they can. They will let me know when they do and I will shoot out a note on the community page with the link.

@CassidysWorkshop Год назад

@@grandpamarkshobbies Awesome, thanks.

@davemagariner1930 Год назад

I wish you good luck with that airbrush. The one I had (6 months) after several deep cleaning in the past I needed to do another cleaning after a long paint session, but the needle collar broke off in the airbrush body when trying to dismantle. The only good thing about the Neoeco airbrush is they're cheap!

@grandpamarkshobbies Год назад

Thanks for the heads up. I'll watch out. Have you tried to contact them?

@franktozier3184 Год назад

Just got my NEOECO airbrush. It is the updated version. The nopssle is the updated version.

@grandpamarkshobbies Год назад

Outstanding!!!!! I hope you like it as much as I do.

@nigelr07 7 месяцев назад

Just looking to start modelling after a xxx yr lay off. Ordered a NEOECO airbrush and compressor as I've always wanted to use one. Looking forward to receiving it, some excellent information here that I'll certainly be referring to as I attempt to get back into the hobby 😊 Great video, thanks.

@grandpamarkshobbies 7 месяцев назад

Thank you very much. After I made that video I started thinning the paint just a smidge more and it made a big difference.

@nigelr07 7 месяцев назад

@@grandpamarkshobbiesinteresting, I would never have thought to thin it as much. Think I'll need to practise a fair bit before committing to my first "real" spray. Thanks again

@grandpamarkshobbies 7 месяцев назад

If you can get them, buy a large box of white disposable spoons. Those are the perfect thing to practice on. I use them all the time. Every time I spray a project I will spray a spoon first just to make sure my mix and air are correct. Them and the cheap plastic poppets are an airbrushes friend.

@flyboy2610 Год назад

Grandpa, you really should spray a couple of paint cups worth of cleaner through the brush before you pull the needle out. Any residual paint on your needle just gpt pulled back through the body of the airbrush. I have the updated version of that airbrush and really like it! I think Neoeco has made a good airbrush at a good price.

@grandpamarkshobbies Год назад

Thank you. I usually do that. I think having the camera right in front of my face really messed me up. I love the airbrush, and also the good people at NEOECO. They really seem to care about their customers. Thanks again for watching, and have a great week.

@chrisweaver41 7 месяцев назад

Thanks for this Q&A I was wondering why not spray cleaner before disassembling from the cup into the cleaning pot.

@grandpamarkshobbies 7 месяцев назад

I'm sorry, it was all me that day. What I do is remove all the paint I can with a pipette, then I wipe out the cup with a paper towel that I put some cleaner on. Then I put just enough cleaner into the cup to come up even with the bottom of the cup. (Just a little bit) then I put my finger over the front of the nozzle and slowly pull back until the cleaner starts to bubble just a little bit. I let it bubble for a few seconds, then I spray it into my cleaning pot. I usually do that three times. Then I start taking it apart.

@GnarfletheGarthok309 Год назад

Awesome video Mark! Very good tutorial on deep cleaning the airbrush. I wouldn't mind getting this compressor for a 2nd or for travel/camping. Do you know what the psi ranges are for the three settings?

@grandpamarkshobbies Год назад

Thanks for watching. I can't tell you how much easier it is to clean this airbrush over my old syphon feed. As for that compressor, it didn't give ranges for the three settings. It just says MAX PRESSURE is 25. So I'm guessing that is the high pressure setting. I would usually spray right around 20 and honestly I can't tell any difference. What I like the most is when I clean my brush I would lower the regulator, then have to dial it back in to spray again working out the pressure drift in my regulator. With this I just hit the button and I'm all set again. I really like that. But anyhow I hope that helps, and have a great weekend.

@billffromnh 4 месяца назад

A very well done video, I'm not an airbrush beginner, but I have a quick question on the compressor. Does it constantly have to be plugged into a power source in order to run, or can it be charged up so it can be used in remote locations? Thanks.

@grandpamarkshobbies 4 месяца назад

No, it does not charge. . . It also died on me last weekend. I did use it a lot though.

@billffromnh 4 месяца назад

Thanks for the update. I'll keep my pancake compressor around a bit longer.

@ChairMan71196 Год назад

Before you took it apart you should’ve kept the gun in the cleaner and put your cleaner in while spraying and keep adding till it’s clear then you take it apart.

@grandpamarkshobbies Год назад

You are 100% right. That video got started at 5am, and I had to re shoot it 4 times before my camera/computer/brain all meshed up. I didn't even realize that I didn't back wash it until my wife pointed it out to me. I usually wipe out the bowl, run the rest of the paint out of it. Run a few bowls through it, then I back flush it a few times to brake up whatever else is left over, then I run another few through the front, then I pull the pin. I was just so tired that I skipped that whole part.

@ChairMan71196 Год назад

@@grandpamarkshobbies I k ow how it is when you’re so tired and aggravated your brain don’t want to brain anymore, I’ve ran heavy equipment like that several times, sketchy situations. Lol

@grandpamarkshobbies Год назад

Ohhhh man that's funny.

@mikecup212 10 месяцев назад

Hello, I just found your channel, I’m getting back into building cars after 40 years, just wondering do you wash all your bare plastic with soap and water before you paint them? Thanks for the video

@grandpamarkshobbies 10 месяцев назад

Welcome back to the hobby. I do wash all my parts. Usually first thing. I put just a few drops of Dawn dish soap in warm water, and use a soft toothbrush to give everything (except the clear parts) a quick scrubbing. When I'm done scrubbing the parts I lay them on a towel. Then I rinse my tote with clear water. I then put warm clear water in the tote and rinse all the parts. I'll lay them on the towel and dry them with paper towels. Not sure if I need to do this or not, but that's what I did in the 70's and I've just kept doing it.

@Jimmy-sb3fc 4 месяца назад

Thank you So much for this comprehensive video! Hey, I have a question: 2 days ago I sprayed a spoon (Roughed up with 800 grit sand paper) with acrylic paint, and I'm able to scratch the paint off. Am I missing something? I don't want to use it on a model before I figure out the issue(s). Thanks again!!

@grandpamarkshobbies 4 месяца назад

Thanks for the kind words. Some paints take longer to harden. I usually let my Tamiya paints harden for about four days before I really mess with them too much. As for other paints, I'm not sure. I know that some paints need primer first to hold onto something. Tamiya paints do well on their own as long as you start out with a few very light coats to give it something to bite into. Even with Tamiya paints I wait four to five days before I tape for stripes. That way I'm sure the paint is good and cured.

@Jimmy-sb3fc 4 месяца назад

Thank you so much,@@grandpamarkshobbies !

@blueline308 Год назад

If it's free you gotta say it's the best. No trust in your opinions at all.

@grandpamarkshobbies Год назад

I will be honest with you, I told them if I don't like it I wouldn't make the video. Then I opened the box and said (Oh Man) and didn't have any hope at all. But when I tried it I was surprised at how well it did. I've worked way to hard to build up this channel to do a recommend on a product that didn't work, or I had problems with. I have too much respect for all of you to do that. This exceeded all my expectations.

@billaicklen9914 8 месяцев назад

Where do I find your cleaner the masters?

@grandpamarkshobbies 7 месяцев назад

I get it on Amazon. I really like this for acrylic paint. It's the second bottle I've used of it. Here's the link. www.amazon.com/Master-Airbrush-Cleaner-16-Ounce-Bottle/dp/B0BN77JPWP/ref=sr_1_7_pp?crid=3C3GIAFCD0YBA&keywords=airbrush+cleaner&qid=1701485152&sprefix=airbrush+cleaner%2Caps%2C133&sr=8-7

@billaicklen9914 7 месяцев назад

So nice of you to reply. Thanks again looking forward to seeing your other videos. I’m now a subscriber.

@grandpamarkshobbies 7 месяцев назад

You are very welcome. Thanks for subscribing.

@waynewootton5385 Год назад

how much dose a rig like that cost thank you grandpa

@grandpamarkshobbies Год назад

Here's a link to the airbrush. It comes with everything except the compressor. www.amazon.com/NEOECO-Multi-Purpose-Airbrush-Dual-Action-Gravity/dp/B0B757WWD8/ref=sr_1_2_sspa?crid=1O2UY2KDQ175C&keywords=neoeco&qid=1686874409&sprefix=neoeco%2Caps%2C120&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1 And you can pick up a compressor for about 60 bucks at Harbor Freight.

@waynewootton5385 Год назад

hey grandpa please don't build no more 32 fords I'm 32 ford out every one build themplease ????

@grandpamarkshobbies Год назад

LOL. I have a few more to do before I can call them done. I may have a problem. LOL

@kamdavulu Год назад

You should use the camera further away

@grandpamarkshobbies Год назад

I sure wish I could have. I have very little room and it was right on my chest.

@jj-icejoe6642 Год назад

This is the old model

@grandpamarkshobbies Год назад

Yes it is.

Далее

Как чистить аэрограф @Gexodrom

35:01

Как чистить аэрограф @Gexodrom

Просмотров 34 тыс.

Spraying with the NEOECO NCT SJ83

16:46

Spraying with the NEOECO NCT SJ83

Просмотров 6 тыс.

Глеб теперь знает движения! #iribaby #shorts

00:14

Глеб теперь знает движения! #iribaby #shorts

Просмотров 132 тыс.

СКОРО ЮТУБ ЗАБЛОКИРУЮТ! ПРОЩАЕМСЯ

5:22:40

СКОРО ЮТУБ ЗАБЛОКИРУЮТ! ПРОЩАЕМСЯ

Просмотров 1,1 млн

Олимпиада провалилась, даже не начавшись! Зачем парижане массово саботируют игры?

01:57

Олимпиада провалилась, даже не начавшись! Зачем парижане массово саботируют игры?

Просмотров 845 тыс.

Воскресный утренний стрим!

1:00:16

Воскресный утренний стрим!

Просмотров 222 тыс.

NEOECO SJ83 AIRBRUSH TEST AND REVIEW

26:39

NEOECO SJ83 AIRBRUSH TEST AND REVIEW

Просмотров 8 тыс.

Что такое аэрограф и как им пользоваться

19:35

Что такое аэрограф и как им пользоваться

Просмотров 265 тыс.

Beginners guide to the airbrush

23:43

Beginners guide to the airbrush

Просмотров 11 тыс.

Focus on Tools, Gaahleri, Swallowtail trigger airbrush

44:50

Focus on Tools, Gaahleri, Swallowtail trigger airbrush

Просмотров 957

Cheap Airbrush Blew My Mind - Must Have!

11:08

Cheap Airbrush Blew My Mind - Must Have!

Просмотров 58 тыс.

NEOECO 3 in 1 Airbrush Testing & Review + Bonus

8:53

NEOECO 3 in 1 Airbrush Testing & Review + Bonus

Просмотров 12 тыс.

Use This Hack When Airbrushing Acrylics - Airbrushing Tips & Tricks

24:41

Use This Hack When Airbrushing Acrylics - Airbrushing Tips & Tricks

Просмотров 24 тыс.

Acrylic Paint Home Brew Thinner and Airbrush Cleaner e002

17:16

Acrylic Paint Home Brew Thinner and Airbrush Cleaner e002

Просмотров 259 тыс.

Our *NEW* ULTRA! Watch our Gamechanging new Painting Process for Starting Out in Airbrush!

32:39

Our *NEW* ULTRA! Watch our Gamechanging new Painting Process for Starting Out in Airbrush!

Просмотров 86 тыс.

Testing The All New Updated NEOECO Airbrush - Great $40 Airbrush

29:05

Testing The All New Updated NEOECO Airbrush - Great $40 Airbrush

Просмотров 41 тыс.

Сапсёрф сломался пополам #обзор #интересно #редбулл

0:15

Сапсёрф сломался пополам #обзор #интересно #редбулл

Просмотров 6 млн

FlexIQ Orbito #настольныеигры #boardgames #games #игры #настолки #настольные_игры

0:32

FlexIQ Orbito #настольныеигры #boardgames #games #игры #настолки #настольные_игры

Просмотров 4,3 млн

CAA Conversion kit at ZAHAL 🎯

0:14

CAA Conversion kit at ZAHAL 🎯

Просмотров 73 млн

ОБМЕНЯЛ СКРЕПКУ НА ЛЮКСОВЫЙ АВТО! ЛИТВИН, ТАМАЕВ, СУБО, СТИЛ!

1:38:25

ОБМЕНЯЛ СКРЕПКУ НА ЛЮКСОВЫЙ АВТО! ЛИТВИН, ТАМАЕВ, СУБО, СТИЛ!

Просмотров 4,9 млн

FlexIQ Orbito #настольныеигры #boardgames #games #игры #настолки #настольные_игры

0:32

FlexIQ Orbito #настольныеигры #boardgames #games #игры #настолки #настольные_игры

Просмотров 4,3 млн

Как бесплатно замутить iphone 15 pro max

0:59

Как бесплатно замутить iphone 15 pro max

Просмотров 7 млн

В Турции погибла самая главная байкерша России «МотоТаня» #мототаня #новости #байкер #мотоцикл #шок

0:43

В Турции погибла самая главная байкерша России «МотоТаня» #мототаня #новости #байкер #мотоцикл #шок

Просмотров 3,5 млн