Acrylic Paint Home Brew Thinner and Airbrush Cleaner e002

Подписаться 13 тыс.

Просмотров 258 тыс.

50% 1

These are my favorite Home Brew Acrylic Paint Thinner and Airbrush Cleaner Recipes!
- GRUMPYS NEW MAKE AMERICA MODEL AGAIN MUGS!!: shop.spreadshirt.com/gosm-off...
- Email: GrumpyOldScaleModeler@gmail.com
- Address:
PO Box 622
Hollywood, Maryland
20636
This is is a quick down and dirty covering my favorite acrylic home brew paint thinner and airbrush cleaner.
This is my personal go to and the recipe plus mixing instructions are included.
Here is the recipe as used:
Cleaner:
1. 100ml of Windex
2. 150ml Distilled Water
3. Approx 70ml of Alcohol ( just added to the top of the neck)
4. 10 drops od Glycerin
Thinner:
1. 175ml of Distilled Water
2. 75ml of Alcohol is what I called for but like with the cleaner I added up to the neck for approx 135ml
3. 10-15 drops of Glycerin
Below you'll find a few of the items used in this vid,
Squeeze Bottles : www.amazon.com/gp/product/B00...
Windex: www.amazon.com/gp/product/B07...
Glycerin: www.amazon.com/gp/product/B00...
My Equipment:
Canon EOS Rebel SL2 amzn.to/2Eh4ehB
Studio Lights amzn.to/2YxKZYT
Ultimate Lavalier Mic amzn.to/2JO4Sae
AmazonBasics 60-Inch Tripod amzn.to/2EcMzHW

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 447

@skierkickjoe 6 лет назад

Thanks for the advice! I mixed both today and absolutely love the cleaning solution. Inexpensive and very effective.

@l0udcheese 5 лет назад

7:40 if u want to skip right to the mixtures

@Fredb 5 лет назад

thanks ;-)

@NeonsStyleHD 4 года назад

Thanks

@chadjaeckel 4 года назад

looking for this was making me Grumpy

@righteyeblink8996 4 года назад

thanks

@Brandlin 4 года назад

Dear Lord - 7 minutes of monotone contentless preamble ....

@ralphschubert6230 3 года назад

I have used a the home brew on two occasions now with excellent results. Airbrushing with acrylics is fun again!

@philod902 5 лет назад

New to airbrushing, This was very helpful, thank you.

@1Stevencat 4 года назад

The background set-up looks magnificent!

@cappuchinofonzarelli537 5 лет назад

Thanks a million, keep up the excellence!!

@robbrady3096 6 лет назад

Thank you my friend, just made up 900 mls for the cost of $15. My normal airbrush cleaner costs me $20 for 250mls. I then tested it cleaning up one of my cheap chinese airbrush's and it worked wonders. I don't know if the addition of glycerin makes a difference but the trigger and needle seem much smoother. Once again Thank YOU

@masoudsotoudeh9243 5 лет назад

Thank you so much for sharing your knowledge and experience.

@goofyartist 4 года назад

You’re a class act...Thanks for the info!!!

@franklinwoodturningcraftsh998 2 года назад

Thanks for sharing, exactly what i was looking for. I tried these both out today and WOW ! Fantastic stuff !

@josephstanczak4340 5 лет назад

Great video - gonna give this a try. You can also use the water from a dehumidifier, just filter it to get any contaminants from the container out. But it is chemical free.

@thegaper1090 4 года назад

Tried it and it works great with my Paasche Talon. I will never spend $12.00 on a bottle of cleaner or thinner again. Great video that actually helps save some cash. Can’t say that for most of the informercials on RU-vid. Thanks my model building brother! 👍😊

@thisfool260 3 года назад

So while this video is older I'd like to put this out there. The problem of the chrome being stripped off from the inside of the paint cup is not only a problem with "cheaper" airbrushes. If you do a search you will see it's common in most airbrushes including my favorite iwata. While this will happen naturally over time ammonia will really speed it up and it makes it a pain trying to clean the cup for a color change. The quickest way to strip the inside of the cup is leaving cleaner in it. Do not under any circumstances leave cleaner in your brush for extended periods. Overnight is all it takes. The manual on my brush says no longer than 10 minutes.

@xanderguldie Год назад

I airbrush all the time and I never understood why people would want to leave cleaner in their airbrush anyways. Just get the paint out ASAP, clean it, spray some alcohol through it and you're done in two minutes.

@gazsto Год назад

@@xanderguldie What would you recommend for thinners? seen so many, 2-1 (water/IPA) ratios with 10mlFlow improver and 1ml retarders added to 200ml mixes. In the above mix he's used Glycerin, which many recommend, would it work with the above formula do you know? Just new to airbrushing and trying to gather the best solutions and mixes, found a window cleaner solution without Ammonia, so not so harmful.

@xanderguldie Год назад

@user-rz7pw5rk5t For cleaning, I use a couple of different things. Usually, I start with warm water, then my homebrew cleaner, which consists of windex, isopropyl, and a couple of drops of glycerine. Depending on how much paint I used, I'll flush my airbrush with a little bit of acetone. For thinners, I dont like to use retarders unless I need the paint to dry slowly for some reason. I mix rubbing alcohol with water 1:1, and that's it. But it depends on what kind of acrylics you're using. So I recommend you experiment with the ratios.

@gazsto Год назад

@@xanderguldie Thanks and very much appreciated!

@cobosenriquez 5 лет назад

Excellent info, thank you, I learn quite a bit, please keep it up...

@strinity511 7 месяцев назад

I have been using your recipe for 3 years now. I will never buy thinner for acrylic, this recipe is amazing. The cleaner is just as amazing as well

@Myoldaccount-mu7of 5 лет назад

I made the cleaner tonight and it works great! Thanks. I'm going to try the thinner tomorrow after I replace my messed up compressor.

@Efin89 4 года назад

How did the thinner work for you?

@michaelsingletary5550 5 лет назад

Lysol All Purpose Cleaner works as a great airbrush cleaner for acrylic paint. It can also be used to remove acrylic paint from parts you made a mistake on. It is inexpensive (smells nice too).

@tammyadair2301 Год назад

Do you use straight Lysol?

@SuperTexasBlues Год назад

@@tammyadair2301 yep, straight out of the spray bottle...into the cup... spray it out, change colors, keep painting youll need a full cleaning when finished, but its a great flush between colors

@1FelixTheCat 5 лет назад

I watched 15 other "homebrew" videos. Ultimately came back, subscribed and tried the cleaner. Thank you ! Works excellent ! Greetings from Cape Cod , Massachusetts ! Felix.

@GrumpyModeler 5 лет назад

Felix The cat And his bag of tricks I glad that it works for you. Remember, the Thinner is not recommended for all acrylic paints. I might need to do a side by side if all the brands.

@cruzmzuniga8400 5 лет назад

This was great information. i will give it a try and hopefully save some money on the long run. Thank you

@reforgedcriterion1471 4 года назад

Love these squeeze bottles, glad I found this vid.

@mdrony114 3 года назад

Sir,pls sent me enamel peint making video

@clane4485 5 лет назад

Those Pampered Chef measuring cups are the best. I use them for EVERYTHING. I've even marinated chicken in them.

@GrumpyModeler 5 лет назад

Chris Lane I use the heck out of em.

@stevecsongvay3455 3 года назад

Thank you! Works like a charm.

@davidhefner5668 3 года назад

Got the stuff to make it today....

@fickionfork 2 года назад

Your recipe is the best i will try it on soon . every ingredient it so easy to find in my home town .thank a lot sir

@ModelMinutes 6 лет назад

Thanks for sharing! Interesting stuff :)

@JSAnstock 4 года назад

Great information, thank you. I found a free source of distilled water, if you have access to a condenser type clothes dryer. The water produced by these is distilled. I put it through a filter (a lint free cloth in a funnel seems to be sufficient) and save it in cleanded out pop (soda) bottles. Lots of uses for it, including this now. Hope this helps someone 🤞

@johnathanbooth1865 5 лет назад

Thank you for the video! It was super informative! I'm going to the grocery store right now!!

@Danny_Harris-Arts 2 года назад

good stuff! I started using the thinner mix and was impressed at how well it worked vs store bought, i wont be buying commercially made any more. doesnt matter much but i put the glycerin in first then it pretty much is mixed by the time I add the water and alcohol

@alejandroagnese550 4 года назад

Excellent video! thanks from Argentina!

@neilward6557 3 года назад

Many thanks from Yorkshire for your information .

@BeaRrug66 3 года назад

Thank heavens! No more spending mega bucks for +am!ya thinner and airbrush cleaner!

@georgehwynn374 5 лет назад

To the Grumpy Modeler; i had just make up your cleaner,& thinner formula > The cleaner works good on old dry up acrylic paint ,& the thinner i will try later. Following your formula recipe it was quick, & easy to do.. Thank you .

@lusty444 4 года назад

A great informative video. When I I first got into this hobby I wanted to do modeling now I have to become a Chemist!

@joeb564 Год назад

Definitely an educational process.

@wilfredjones3008 3 года назад

Well i got to say that was interesting my first time watching your youtube channel you speak slowly and clearly ,now I can make some thinner and cleaner for a fraction of the price thanks

@chadjaeckel 4 года назад

Very useful, thank you for this.

@kargandarr 3 года назад

I saw a video last night where someone else was making their recipe for thinner. They had 2 mixes with one of them similar to yours with the exception of ammonia while the other used windshield cleaner in the other one. They didn't measure the glycerin in any way and just poured a small amount into their mix. The rest of it was 1:2 glass cleaner to water for their glass cleaner mix and 1:1 when using windshield cleaner with both getting alcohol and glycerine.

@ligerTitan 3 года назад

It work for me thanks man keep it up

@jfuscojr 3 года назад

I just did my first refill. Lasted me about two years.

@klaasbakker4304 5 лет назад

Excellent!

@ilkergundogdu8368 4 года назад

Thankyou so much, you are awesome!

@donalexander4113 6 лет назад

Great video once more. Perfect timing too. I just ran out of my airbrush cleaner and need this stuff bad. I even ordered the two bottles. Question for you. What brands of acrylic paint can you use the thinner on? I mostly use Bombshell Brew paint and Vallejo

@vbaltrunaite 3 года назад

Hello, what kind of paints would you recommend for the textile? Could I just thinner for basic acrylic paints (water based) and use it without spending a lot of money?

@jrdchemist 2 года назад

Definitely trying this when the brand-name stuff has been used up. Thank you for sharing!

@Harleyboi04 4 года назад

Totally new to airbrushing so this is my first video on cleaners and thinners. I like how simple the ingredients are and certainly makes good sense. The proof will be in the application I guess, so here goes nothing. Thanks for you mixture ingredients.

@GrumpyModeler 4 года назад

Acrylics only!

@moniquehagansOnly 5 лет назад

Thank you for this video. Can you use mineral oil in place of the glycerin? Or just go with the glycerin?

@contirossini 5 лет назад

you should not add OIL to acrylic ink (even when it does not mixes whit water)... so, no, keep whit the glycerin.

@lancelehman1105 5 лет назад

Great videos on great topics! The one thing I use that is different is Liquitex Flow Aid as a leveler. Or does the glycerine tackle this?

@twobyfour 4 года назад

From what I`ve read, you can use a drop of glycerine. Save the flow aid for paint as its more expensive.

@w.rustylane5650 4 месяца назад

Revisiting this video as my recipe has changed. I now use Simple Green instead of non ammonia Windex. I also use a little flow enhancer in the thinner. Cheers from eastern TN

@Bob0sModelFabWorx 6 лет назад

As a side note to the Ammonia harming rubber seals. The most common (non Chinese) brand of seal is EPDM Rubber. Ammonia is only harmful to the rubber if used in concentrated form and left to sit. With the diluted amount used in Windex, and the diluted even more with your solution, there will be no harmful effects. The only seal that Ammonia will really cause damage is with Viton seals.

@kevinm3751 6 лет назад

My Master airbrushes in fact had Viton seals and cleaning with Windex did in fact totally destroy the O rings. It is worth noting to that Nitrile (Buna-N rubber ) seals will also not fair well with high PH type cleaning solutions.

@jamesanderson9747 3 года назад

Hi very detail video, thumbs up!Just 2 questions . 1)i already have 100% alcohol(commercial type),do i still add in the same proportion too? 2)I'm using angelus leather paint.does it work too? and do you know the ratio for your thinner:angelus paint?

@henrysscrollsawworks6367 5 лет назад

love the videos

@p40tomahawk41 3 года назад

Also,in the thinner,is there a mixture with a paint extender for the open time with the paint...thanks

@BloodRavenX 3 года назад

Would switching the windex with windshield fluid still work the same

@fouadfakhoury1 Год назад

Thank you for this great video, a question, is there any difference in Isopropyl based alcohol vs Ethanol based Alcohol when it comes to making those cleaner and thinner mixes?

@FredWilbury 5 лет назад

Thanks Grumpy ....from the old man Railway modeller.....regards Fred

@timminer5774 3 года назад

75 or 100ml of Windex? You say 2 different amounts in the vid. Your cleaner recipe in the description is 320 ml like someone pointed out.

@rafaelc.gonzales9060 Год назад

I copied this recipe and the recipe I'm very shocking that it works and we trying to find a cheapest way to do it this way is the best way to do it was great hands down everybody should thank you once again for your help

@Allessio777 4 года назад

Do bottles need shaken before each use, or is the suspension permanent?

@43rocket 5 лет назад

will your thinner brew work as a reducer to for better paint flow and non clogging??

@terrythomas790 4 года назад

Use a strainer also

@p40tomahawk41 3 года назад

Thanks for the info...I will try that...quick question...since I have a bunch of 99% Iso Alcohol.....could you still use that or would you water it down a bit before adding to rest of ingredients.....thanks

@keimahane Год назад

Thank you, this will save me a ton and no smell in the house.

@JamesWilliams-hx4vu 4 года назад

An excellent source of distilled water, if you have access to it, is a home dehumidifier. We heat with an unvented gas heater and use the dehumidifier to keep from getting mold etc in the winter. Any time of year tho just run it for an hour or two for a batch of fresh pure H2O.

@curtcotham6993 4 года назад

James Williams full of heavy metals though depending on your dehumi

@thecraftykricket 2 года назад

Question about thinner! My airbrush say to dilute acrylic paint 7 parts water to 1part pain. To me it looks to thin what would you recommend to dilute paint with the thinner?

@Georgeolddrones 5 лет назад

Love the video . Thanks 👍George in uk

@w.rustylane5650 4 года назад

I use the same recipes for thinner and cleaner. Cheaper than buying the commercial "stuff". The alcohol is usually 70% isopropyl. I use the non-ammonia Windex. I use the water soluble glycerin. And I make my own distilled water. Make a gallon every night in my water distiller.

@franco3584 5 лет назад

Awesome Info , Thanks

@betsychiu1663 4 года назад

Hello, I live outside the state and w don't have Windex here, is there any possible replacement that I can use to clean the airbrush? Thank you.

@GryphonArmorer 5 лет назад

I might try your recipe for the cleaner, because my recipe is a little different and think it's a little lacking. But I really like my thinner. I'll share my recipes below. Cleaner: in a 500ml squeeze bottle (all "measurements" are approximate) 1 part distilled H2O 2.5 parts windshield washer fluid (blue H2O) or rain-x windshield washer fluid (orange H2O, works better (reduced tip dry) but costs more) .5 - 1 part 90% ISO propanol alcohol 15 - 20 drops glycerin Thinner : in a 500ml squeeze bottle (all "measurements" are approximate) 2 part distilled H2O 1 part 90% Isopropyl alcohol 10 - 12 drops glycerin (flow aid & slight retarder) 10 drops propylene glycol (retarder) I use the glycol (a "second" retarder) to counter the faster drying effects of the alcohol. Some might say cut back on the alcohol, and I have tried that and it seems like it isn't as smooth (i.e. orange peeling or pigment speckles) and get a lot of wave dry without glycol. Also with this recipe I've noticed less tip dry.

@cappuchinofonzarelli537 5 лет назад

thanks

@todddoom 5 лет назад

Where do you get glycol?

@BennyCFD 4 года назад

Try this.... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-e30WyB8KsB0.html

@reforgedcriterion1471 4 года назад

I've picked up most of this stuff. Have you not found washer fluid to work as a thinner? I've talked with some old timers who use it religiously as a thinner.. I have everything but a good supply of ipa obviously because of the current pandemic. I'm just trying to find a better recipe. One guy makes up his own car paint that is super high gloss high definition which is 2 parts paint, 1 part washer fluid, and 1 part pledge.

@jelly8594 Год назад

Finally someone that mentions propylene glycol!👌 Did you by chance also try your mix without Glycerin?

@williamaviles2647 4 года назад

Thank you for info. Can I use 70% alcohol.

@donaldshroyer8633 3 года назад

I've seen suggestions to use windshield washer fluid as the thinner. Compared to your idea, it would have no ammonia. Have you any experience with or do you have an opinion about that?

@pawpawstew 2 года назад

Windshield washer fluid is made with methanol (wood alcohol), which is very dangerous to breath if atomized.

@juanbarrera8542 4 года назад

Is this thinner good for maintaining the paint pigments?

@zeroa6 5 лет назад

Awesome! subbed.

@chrisapattee 5 лет назад

I use leather dye mostly, will this cleaner work for that as well? They are alcohol based. Thank you!

@kevinkelly1529 5 лет назад

Yes it will. But you're better off increasing the percentage of alcohol when using alcohol-based inks and paints.

@CarlosDelaoGunEngraver 5 лет назад

question are you familiar with Angelus paint, its used or shoes, its an acrylic, but for shoes, does that make a difference? can this be used for that paint?

@GrumpyModeler 5 лет назад

No I am sorry I don't have any experience with that paint.

@collenyoung2812 3 года назад

Very helpful video, is the idea to run the airbrush cleaner through the airbrush? Or is the purpose to disassemble the airbrush and scrub the parts with it?

@nathanpartridge3565 4 года назад

I was sick and tired of $8.75 for a bottle of Tamiya thinner. Used your home brew mix and it works perfect! I did use Vallejo flow improver (15 drops) since I had that instead of straight glycerin.

@luisdanielmirandagomez7582 3 года назад

was usefull?

@pilot4701 2 года назад

I wasn't sure this would work with tamiya since it's alcohol based acrylic.

@jrgreiner Год назад

@@pilot4701 Actually, Tamiya acrylic is a solvent based "hybrid" acrylic. I haven't tried Grump's mixture with it and while I know what I'm about to mention "ruins" dealing with this paint because it's acrylic, but *THE* best thinner I've ever used with Tamiya acrylics (and still do) is Mr. Color Leveling Thinner, which is a LACQUER thinner. I usually mix 60-70 (sometimes even more)? % thinner to about 30-40% paint and it airbrushes flawlessly, never clogs the airbrush tip and dries smoothly and durable. Having said that, you must then clean your airbrush with regular 'ol lacquer thinner but believe me, once you try it, you won't go back.

@alexthehopeless3778 Год назад

The fact that you even have to say "don't eat it" is already a testament

@katieshousecs 4 года назад

I hear that you should stay away from products with ammonia for the cleaner, does that also go for the home new thinner?

@WayneEarls 3 года назад

Been using windex on car windows with chrome trim all my life.

@darkuser6550 5 лет назад

Is there any difference if i use vegetal glycerin (the one ised in kitchen?) Btw great how-to, thanks for sharing

@timminer5774 3 года назад

Good luck finding non vegetable glycerin

@mikepulsomagnetico8573 4 года назад

Very good attitude. Thank You. Do you suggest some paint cleaner for enamel.?

@creativecraft100 3 года назад

It was a great video and demonstration actually. Hopefully you teach us how to clean an airbrush because it’s my difficult part 😄

@thedieiscast9729 5 лет назад

Thanks for the information.

@DjRoan_only_top_kizz 3 года назад

can i use 90 grade PINK denaturate alcol instead of transparent iso 91? Will the pink contaminate the acrilic color? Thanks

@tonymammel3542 5 лет назад

Thanks for posting this video, you presented it very well and in a clear concise manner! Just a point of curiosity for me, why are you using the 90% alcohol and thinning it down? Why not go for a lower percentage off the shelf (we have 50 and about 70% available where I live in Canada) and add less water or maybe no water at all? I’m certainly no chemist, just left me wondering.

@cathy3046 5 лет назад

91% is easily accessible here in the U.S. I can get it every bit as easily as the 70%, but I also use it during prep of my items, so I prefer the 91% anyway. :)

@igorrabinovich3386 20 часов назад

Thanks a lot for your advise. Did you test your thinner with AK 3rd gen paints? A lot of modellers have issues to thin it properly for airbrushing. Thanks again.

@azdave2721 5 лет назад

Excellent video. This is Exactly what I was looking for. Thanks. I plan on making several bottles. What was that stand your plane was on? I’m interested in getting a few stands like that for painting. Thanks again.

@GrumpyModeler 5 лет назад

Thank you I am glad that you found what you were looking for! The stand is actually made by JH Models. A quick google search will bring them up. Note that some assembly is required! Thanks for watching!

@martinj9251 2 года назад

Very handy, Question can you use spray tin primer. Then go over the top with Acrylic air brush paint? Very new to this 😳

@nikushim6665 2 года назад

the seals aspect is true, just depends on what they are made of. Dont use windex, go to the automotive section and buy store brand windshield wiper fluid its generally ammonia free and a hell of alot cheaper. Gallon of walmart brand stuff is like three bucks.

@JustDave87 3 года назад

Since squeeze bottles are not sealed on the spout, would you need to worry about the alcohol evaporating quicker than if the bottle was sealed?

@timminer5774 3 года назад

I found some 250ml condiment bottle that have caps on Amazon.

@waynereeves6023 3 года назад

I used windex 70 % and metholated spirits 20% and 10% water and it is ok for cleaning

@OBERSTATC 4 года назад

Thank you so much

@GrumpyModeler 4 года назад

You're most welcome

@Galdorx 2 года назад

Hi There, im gonna make some thinner and Cleaner for my Airbrush. In this mix, can i use something else than Glycerin, i cant get that in Norway. Nowone have it.

@josemanuelperezbautista3597 3 года назад

Hi, thanks for this useful information. By the way , I'll appreciate if you tell us how much milimeters of isopropyl alcohol you add to the cleaner mix.

@timminer5774 3 года назад

Not millimeters. Milliliters

@harryschmus8579 2 года назад

Are the cleaner and thinner suitable for acrylic urethane primers

@ameliabuns4058 4 года назад

can those water based acrylic paints be used on plastic?

@alijafri1648 4 года назад

Can I use this home brew thinner with Mr. Surfacer primer 1500?

@genekloszewski5484 3 года назад

Thank you!, took a while to get answers!,

@Myoldaccount-mu7of 5 лет назад

Great video. Can windshield wiper fluid be used instead of windex?

@djmeatman 5 лет назад

Andrew B. Richardson yes

@pawpawstew 2 года назад

Windshield washer fluid is made with methanol (wood alcohol). Methanol vapors are toxic. Bad stuff.

@scottp.5055 3 года назад

Is it 100 ml of Windex or 75 ml? You said 100 ml first then marked 75ml when you started making the cleaner.

@andrewkeeney701 5 лет назад

Very well done video. Will this work for thinning and spraying acrylic craft paints? I saw another video where Golden (namebrand) GAC 200 was used to give craft paint a protective finish. Have you used that if you have used craft paints? Thanks.

@GrumpyModeler 5 лет назад

It’s should work, I would suggest that if you attempt it that you do it in a test subject first!!!