SR5 dash cluster swap (tach & speedo)- 80s pickup/4Runner 

I’ve been wanting to do this for years on my 87 pickup. Just now looking into it…never realized how easy it would be. Thanks for sharing!

Fixing an input shaft leak on my trans so it’s out. Speedo has been out too. I needed this quick little video. Nice and to the point. 👍🏼👍🏼

Just so everyone knows you can’t do this swap and just run the truck right after. You have to get the oil pressure sender from the SR5 trim truck 1985-1992, DLX oil pressure sender will fry the oil gauge on the new cluster ... too high of a voltage. It’s about 25$ for an aftermarket one or find one at the yard for cheaper.

Thanks but!! Been trying figure out for years! I mean years!. In your video just took me 3:42 minutes. Thanks bunch!

Thank you for showing how to remove the speedometer cable.

Ok, excuse my ignorance. I have an 88 pickup with the 22re. What year (s) cluster am I supposed to use to do the swap? Thanks for your help.

Hey bud really appreciate it been going crazy trying to figure how to get the rpm to work

Interesting, I did the cluster swap in my 88 4Runner tonight without adding the wire. Tach works but it seems to read low. And the oil pressure gauge reads high key on and drops when running 🤷

So just plug and play with a sending unit change?? NO wiring changes at the harness with going from a DLX cluster to a full gauge cluster? Is it really that easy

Thanks gonna do this to my 1985 pick up!!!

Hey Duke Offroad, Your videos are great, especially for the beginner gearhead I'm turning into. Really easy to follow. I have an 87 4runner that is giving me some fits, neither the odometer/speedometer are working but the tachometer is. The light in the board went our as well, but the emergency lights (engine/low fuel) still work. The fuel gauge only barely works (but that's been a long time problem, it shows full, half full and then drops to empty when it has about 50 miles left in gas). By pulling this out could I find the problem? Or might you recommend looking for an electric connection issue somewhere else? All my fuses look great. I've had 3 mechanics look at it and they all say it's 'too expensive' to warrant the trouble.

Your video skipped the hardest part. How did you get your hand behind the cluster to release the speedo? Thanks..JC

thanks for the vedio man helped me out alot

Is the tachometer accurate when just hot wiring straight to the coil ground?

Could you do the temp, oil and volt gauges? I want everything to work.

What about the other gauges

Has anyone had issues with the temp gauge not working well after the swap? I have an 89 4runner .

Is that a Daihatsu tachometer?

hallo from which the cable for the rotammet was streamed

What if the two connectors aren’t there for the tach? I have a 86 4Runner.

I can do the same swap onnmy 95 tacoma dlx ?? Any 4runner cluster 1994-1996 can do the job ?

thats work in a diesel hilux ????

You got a 4 speed