If you want mount an SSD(Solid State Drive) in Ninja-V, you need a dedicated SSD or a custom caddy. In Ninja-V purchase package, only one caddy is bundled, so if you want to use multiple SSDs, you will need to purchase additional caddys. And the bundled caddy blocks the vents for heat dissipation with the plastic material and is completely in close contact with the main body, so I think that is one of the factors that make Ninja V hotter because it generates a lot of heat during recording operation.
In the modeling process, I wanted to make a simple SSD fixing adapter, and I made a type with a gap between the SSD and the body so that it could be a structure that helps heat dissipation. (Type_B) And it is designed so that it can be replaced immediately without adding a separate device to a general SSD. (Type_A)
Choose one of the two types you like and use it. (For Type B, Need 4 M3 x3mm screws to secure it to SSD)
File sharing is for sharing ideas. Use it for personal use only. Commercial use is not permitted.
Refer to the link below for more information and print file(STL). -Optimized for 3D printing
surplusperson....
If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses.
paypal.me/supl...
Ninja-V에 SSD(Solid state drive)를 장착하려면 전용 SSD 또는 커스텀 캐디가 필요합니다. Ninja V 구매 패키지에는 1개의 캐디만 번들로 제공되므로 여러 개의 SSD를 사용하려면 추가로 캐디를 구매해야 합니다. 그리고 번들 캐디는 플라스틱 재질로 방열용 통풍구를 막고 본체와 완전 밀착되어 있어서 녹화 작업 시 발열이 많이 발생하기 때문에 Ninja V를 더욱 뜨겁게 만드는 요인 중 하나라고 생각합니다.
모델링 과정에서 간단한 SSD 고정 어댑터를 만들고 싶었고, 방열에 도움이 되는 구조가 될 수 있도록 SSD와 본체 사이에 틈이 있는 타입을 만들었습니다. (Type_B) 그리고 일반 SSD에 별도의 장치를 추가하지 않고 바로 교체할 수 있도록 설계되었습니다. (Type_A)
두 가지 유형 중 마음에 드는 것을 선택하여 사용하십시오. B 유형의 경우, SSD에 고정하려면 4개의 M3 x3mm 나사가 필요합니다.
아래 링크에서 출력용 'STL'파일을 다운로드하십시오. (3D 프린팅 최적화 되었습니다)
surplusperson....
#MountainBreezeStudio
#NinjaV
#Atomos
20 окт 2024