SSR 125 Pit Bike Carb Fix - Bike Dies When You Turn off the Choke 

I’d be happy as hell if my pops did this with me

Dont get me wrong, this video helped me and several other videos of your have helped me in the past but you seem like your kids hate doing these videos lol as if you're forcing them to be on camera

Man you helped me a lot, i had bought a new carb and almost thought trow it back, and now my bike work great then ever :D I´m glad you take time with your sons, thats someting they will never forget. +1 subscriber.

Thanks for your help! We need more dads like you.

Thanks I'm going to try this later today

Thanks for Video Helped Alot!

Thank you SO MUCH for this video! I've had my SSR for like a year and have had to ride with choke wide open whole time until now Super Easy I did the repair myself before adjusting idle speed I was able to close it 50% (before even closing it a teeny tiny bit it would die) after repair and adjusting idle speed I can close it 100% and it stays running. Also has WAY more power now! Only thing I need to figure out (maybe regarding idle speed,not sure) is it seems to have a delay now, between when I give it throttle and when it reacts to it, but I'll try to figure that out tomorrow. Thanks Again

I had to replace my motor mount bolt about 1 month ago! But now I have another project. Thanks man

the 2 master mechanics haha that was hella funny... gonna try this to make my carb idle

my bike was like this when I first got it its a 2016 ssr 125cc pitbike thanks for making this video

Super Helpful TIPS Thank You Super Cool Dad 🙏🏽

thanks for the video mate it helped me out ps I have subbed

Does the kick down stand have a cutout switch on it and also does your rear brake master cylinder have a bracket connecting of it to connect to the bike frame ? Cause my master cylinder not fitting provolone like bracket or something missing

What are your thoughts i have air. Coming out of the carb intake so it doesn't hold compression like not should

Where are you guys from I need this done to my bike

I had to use a razor blade are a snapped hair clip for the mixture screw

My pit bike is doing the same thing but never move because my choke is keeping the bike on and applying gas it shuts off and i think the small jet needs to be poked through with that twist wire i didn't have wire like that to clean and hope this fixes my bike.

Hi, what did you done it ?

Ao i have a thing that when i turn on the bike (good weather) the sound is really weird and it sounds like it is slowly dying and the rev isnt as high and then if you rev,shift, or just wait it turns off

Hey wht size axel wrk on the back wheel

What if I have a brand new Mikuni carburetor? It is not trying to kick over and it only started with the choke on, it is brand new...

wasnt this for sale not long ago?

Where do I buy a moter mount bolt

I've always wanted a ssr 125, my current dirt bike got stolen so now I'm going to be saving my money for about 3 years.

What are those brake and shift levers? They don't look stock

You can use a screwdriver bit head and twist it with your thumb and pointer finger instead of a screwdriver with a handle.

What does it mean wen your throttle is super loose ND not giving gas?

There is a flat head screw driver to get at the fuel mixture screw it's called a right angle screw driver

can you help me my pitbike over revs when the choke is off but ok half way, but when i rev it over revs straight after. it that to much air?

what airfilter is that?

So I have owned one of these SSR 125 pit bikes for a couple of years now and I just have to say that they never made the video of the bike running crisp because it is nearly impossible for these Chinese POS carbs to run crisp. You have to just work with what you got and run a ratio that is the best. Either too lean or too Rich. One thing that i will say is that these bikes take for ever to warm up! waay longer then any other bike i've owned and they run different and in my case a lot better after they are FULLY warmed up. I love mine its great to mob around on. NOTE: before going on a ride just do an overall check of the bike. my exhaust has fallen off, my motor mounts have come loose, my front wheel has come loose, my chain guide has come loose, my swing arm adjustment screws have come out. my seat bolts have come out. even though they are super fun bikes, they are CHEAP bikes make sure you don't hurt yourselves on them.

I have a bike like this one and I have reg hang for a couple of seconds....could that be a dirty jet or something?

those boys look very sad why I don't know

i think they want you to use one of those angled screwdrivers like a allen wrench but that would be tedius lol

I got the same bike, you guys mind telling me what size main and pilot jets your using in your carbs, mine has a 35 pilot and 92 main, but I can't seem to find a good tune for it, I can get it to idle like a champ but when I go for a ride and it reaches operating temp (choke off) when I try n give it gas it will bog out, my spark plug is black, you guys mind telling me what u have your mixture screw and idle screw set to? Would really appreciate it

Can you use a flat screwdriver head bit on a socket wrench to get to your adjustment screw? I agree the position of the screw is terrible.

Where should I buy this bike from?

This should fix my bike... right Evan?

Help me! When I try to run my pitbike won't start. What does is that the gas flow into the air filter! How do I fix it?

Me and my dad did the same thing we always was working on cars or bikes

Mine dies when I give it more then 1/4 of throttle if that but runs fine if I keep it in that range

try a quater drive socket with a flat head bit in it

My brand new carburetor is only running on choke what could that be

and my carb is the same as this what kind of carb is it actually known as?

Everytime I kick my SSR125, it litterally sounds like a rubber ducky is stuck in the motor. It makes a horrific wheezing noise. Please help.

Breakdown start to finish before you begin this process and show the whole process. Have a taotao 125 and having a carb issue. Cannot get it to run correctly.

What year is this

hi can you buy a ssr exhaust from ebay or Amazon and review it please I want to buy one but I don't now if there good or how they sound

Can you use dw-40 to clean the jet ?

Hello I got the exact same bike. It runs Great at low rpm but when I give it a little throttle it stops running. Do you have any suggestions?

I have the same bike but can you do a vid of what to use if you lost you gas cap

instead of using carb cleaner can you use starting fluif

My bike used to start and idle for 10 seconds or so and cut out whether i reved it or not and now it just doesn’t start now

I have a Stomp 140 with carb problems. it's got a 26mm Mikuni carb. it runs and goes fine but when I give it more than 3/4 throttle it sounds like it's hitting a rev limiter. I've tried adjusting the air/fuel mixture. it's on the middle clip on the needle and I've tried lifting and lowering it one clip the re adjusting the air and fuel screws but still does it. Does anyone have any ideas? Thanks

I think my chain might be too tight but thats how it came in

Lol I wish it was the easy to get the carb out on my Kawasaki klx 140G

Should the wire run completely through the pilot jet or is mine just completely clogged?

I have a few more questions in regards to the CARB on the SSR. My Son is riding the 110. Is the Choke OPEN position when the lever is horizontal and flat? or is it Open when the Lever is pushed downward? The engine dies if the lever is in the horizontal position, unfortunately the poorly worded owner's manual doesn't say what position is open choke and what is closed. Second problem is we're getting fuel overflow while he rides, which leads me to guess Choke is open and the carb is taking on too much fuel, but when I close it the engine dies. How would I fix this?

Every time I go to first gear my bike turns off , what’s the issue ?

Mine was dying after i turnd the choke off, i added more fuel to the ratio cause i thought it was running lean, now it idles fine after i turn choke off but it dies when i come to a stop after riding for a bit, still a bit lean? Or ingota do some adjusting? Or is it something internal

Please let me know the number on your high and low jets

Question, my ssr 125tr is leaking gas straight through the carb and out the overflow tube even when the bike isnt started. i turn the fuel on and it just starts pour out gas, any ideas here?

Dial it in luv it

I changed my carb but it still wont work

I've been having problems with my pit bike, it idles fine with choke on but once I turn it off it Boggs out. If I try to keep it on it back fires n sounds nasty, idk what the problem with it is. Also the tip of my spark plug was burnt. Any ideas

Hey, Bro, what year is this bike? The reason I ask is because I just bought this same bike off of Marketplace, and I can't figure out the year. Knowing the year if your bike will help me out a bit more.

My bike is also having a problem to idle..could this fix that too??

Where do you get your parts ?

Bet its just a cold air leak gaskets blow out on them china bikes on the intake

Guys, i would change that Carb as fast as you can say "Crapycarbio"! Just buy a cheap Chinese Carb like Molkt. At least it got the screws on the right place, very easy to reach

could have just adjusted the idle screw

do they come with electric start

How many screws out did you go on the mixture screw

What are the number on high and low jet ?

what happend to the vids?

super dad

Is that a 26mm carb?

they need at least a 200cc

My bike does when I try to take off in first bogs out and dies

What type of bike is that

My bike is the opposite it dies when the choke is on plz help my son is sad

Can you put bigger carbs on these bikes??

My motor mount bolt broke too for my SSR can you comment a link on where to find

how much does bike cost you ?

My pit bike doesnt start with choke it starts 1st kick no choke

make sure you not using choke opposite like i was lol

it's run because the engine is already warmed up

I am 5'4,will I fit on this bike?

I cleaned my pilot jet but when the choke is off it dies

My ssr is back firing, I have a video on my page, can anyone help

aye bro ur not supposed to spray carb cleaner in the engine while running or when gas is in the carb it can catch fire thats y ur bike was backfiring

Motor mount bolt shears off,...ahhh,..good old chinese steel ,.hahaha !!!

So what did you do to get it tuned? Kinda worthless video if you don’t accomplish the task

Why doesn't my bike run how it suppose to run i run it and it like stalls and doesn't want to run how it's suppose to it's slow for what it has to run . Do I need to clean my carb ?

You won't have these issues if you use non ethanol gas

You didn't tell us any of the steps you took to get the bike to idol properly after you put the carb back on

Nice but he granny shifts

is u giving out free dirt bike cr125 I want one

That is a tiny bike

them boys are way too tall in this video for these.. should have gotten them on some 125cc actual dirt bikes!!!