Star-lord Helmet Build [Star-Lord Cosplay from Guardians of the Galaxy]

Подписаться 34 тыс.

Просмотров 73 тыс.

50% 1

Check Out My Site For Models and Things I Use In My Builds!
www.3dprintedp...
Filament I use for all my builds: ZYLTECH. Love this stuff. Use the link to get 15% OFF your order. COUPON CODE: 3dprintedprops
CHECK OUT ALL THE THINGS I USED FOR THIS PROJECT
www.3dprintedpr...
You Can Send Me Stuff @
P.O Box 813
Little Falls, NY 13365
Star-lord helmet build! I've been dying to finish this build. It's an iconic piece os Star-lord's costume and it really turned out great.
DO3D HELMET
do3d.com/produc...
RISU's Star-lord Eyes
goo.gl/6S9kJ1
Adafruit Breadboard-friendly SPDT Slide Switch
goo.gl/NfFVQj
TAMIYA 6mm Masking Tape with 2pcs Refill
goo.gl/4xZMgZ
3D Filament
HATCHBOX 3D PLA-1KG1.75-BLK PLA 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black: goo.gl/xRg2Ly
Rust-Oleum 7270830 Metallic Spray, Gold Rush, 11-Ounce
goo.gl/ECFve8
Dupli-Color EBGM04337 Gunmetal Metallic General Motors Exact-Match Automotive Paint - 8 oz. Aerosol
goo.gl/hzzXyC
Dupli-Color BTY1530 Silver Metallic Toyota Exact-Match Automotive Paint - 8 oz. Aerosol
goo.gl/6q23Kz
Rust-Oleum Automotive 260510 12-Ounce 2 In 1 Filler and Sandable Primer Spray, Gray
goo.gl/wiviNi
Gorilla Epoxy, .85 oz., Clear
goo.gl/8pzgvi
Tamiya USA TAM87080 Weathering Pastel Set B
goo.gl/r4FRNX
Liquitex BASICS Acrylic Paint Tube 4 oz, 6-Piece Set
goo.gl/Z8cay9
Liquitex BASICS Acrylic Paint Tube 24-Piece Set
goo.gl/wkABdu
Tools
TEKTON 6655 Needle File Set, 10-Piece
goo.gl/nJZFAf
ANBES Soldering Iron Kit Electronics, 60W Adjustable Temperature Welding Tool, 5pcs Soldering Tips, Desoldering Pump, Soldering Iron Stand, Tweezers.
goo.gl/5gMT3h
Genesis GHG1500A Dual Temperature Heat Gun Kit, Grey
goo.gl/RXKG1m
Studio Equipment
Canon EOS REBEL T7i Video Creator Kit
goo.gl/ghahWm
Transcend SDXC UHS-I U3 64GB High Speed Flash Memory Card, R95, W60MB/s (TS64GSDU3)
goo.gl/hdUzow
YONGNUO YN600 Air LED Camera Video Light with Color Temperature 5500K
goo.gl/G6t2fm
YONGNUO American Standard Adapter Power Switching Charger DC for Yongnuo LED Video Light YN-600 YN600
goo.gl/hui7ik
YONGNUO YN300 Air LED Camera Video Light with Adjustable Color Temperature 3200K-5500K for Canon Nikon Pentax Olympas Samsung
goo.gl/baf1Af
12 Pack Acoustic Panels Studio Foam Wedges 2" X 12" X 12"
goo.gl/yDUX5c
Rode VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardiod
goo.gl/zCqvoB
Neewer 3 Pieces 6ft/75 inch/190cm Photography Tripod Light Stands For Studio Kits,Video, Lights, Softboxes, Reflectors, etc.
goo.gl/AtwhxJ
2 Pcs Tripod Mini Ball Head for HTC VIVE Base Station,for Oculus Rift Sensor ,for lighthouses,Camera Camcorder, MDW Holder for HTC VIVE
goo.gl/9qh63v
LimoStudio AGG1501 Photography Continuous 600 Lumen LED Light Set for Table Top Studio Portable Lighting Kit with Gel Filters, Set of 2
goo.gl/XH1gu7
Star-lord helmet, starlord helmet, star-lord mask, starlord mask, guardians of the galaxy, gotg, star lord, star-lord, LEDs, RPF, costume, cosplay, replica, prop, how to, tutorial, peter quill, Guardians of the Galaxy Vol. 2, CR-10, CR10, 3D Printing, 3D Printed, 3D Printer,Do3D, Risu, Cosplay LED, kevin solo, 3d printed props, 3D cosplay

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@BrokenNerd 6 лет назад

Dude, I’m loving this....I’m so glad UncleJessy tuned me into your channel. This came out awesome man!!!!!

@3DPrintedProps 6 лет назад

I'm watching all your stuff right now too! Awesome stuff!

@sandragon2714 5 лет назад

Great build. Thank you for explaining how hard it was with the gluing parts. And for explaining your problems. Takes away some of my own frustrations when I mess up. Basketball idea was awesome.

@3DPrintedProps 5 лет назад

Thanks! Yeah, nothing really ever goes 100% right, but thats the fun. Figuring it out. :)

@TheRealKingDong 6 лет назад

OK just a tip from someone that made prob over a 100 3d printed helmets..one dont use xtc,,,also if gooed up as you say them your mix wasnt right or you lay on to heavy or was to cold to set proper (need at room temp or warming room). Here's my finish (paint not included) in less the 2 day program. One get your self 2 part bar top expoxy (amazon your friend)same thing as xtc but better cheaper and you get way more. make sure you mix to directions and only use small amount as you put on 3 thin coats with a min of 8hours in between coats. slap some filler primer on...wet sand a little (as you shouldnt need to sand that much) slap some filler primer on again to make sure all smooth and your done your prep. When I see guys sanding props for days or even weeks it kills me! Maybe I should do a video as I feel when I see all these lets finish a 3d prop and a hour of the video sanding it just wrong...WRONG I SAY! lol Great video though for sure. Would of like to seen it without a kit you had to buy..but hey Im cheap! lol

@3DPrintedProps 6 лет назад

TelliMantelli nice. Would love to see that vid.

@rodaking2124 4 года назад

Awesome build

@3DPrintedProps 4 года назад

Thanks man! I'm working on a Bloodhound helmet right now that I can't wait to share!

@speliac 3 года назад

If you ever do another build where you need small, circular screens, they sell packs of them at smoke shops. I don't know if they have different size specifications, like say "number 5 screens", "small screens", "half inch screens", or whatever, but they do come in different sizes. I went in with a friend a couple of times when she bought them, but it was years ago, so I don't remember exactly what she asked for, but if you ask for "screens" that will at least get you started, and you can discuss sizes from there. Or probably Google "pipe screens". They're stamp cut out as pretty much perfect circles, so it'd save you some fiddling around.

@g-ready1887 2 года назад

"WAIT" lol definitely my biggest problem 😅 I have this on my printer now and I wanted to see how cool it can be ... dude you killed!!! 👏👏👏😎👍

@3DPrintedProps 2 года назад

Thanks man, it was my first really big success. I love that helmet.

@innerparson736 6 лет назад

Excellent work Kevin, you have a really good eye for detail and it completely paid off. It sounds like most of the time was on taping and spray painting; would it be more economical to paint the mask with a brush? Also at 14:40 maybe printing a tiny filler piece to fit in that gap would have saved a lot of work trying to glue epoxy it. But the basketball idea to get the mask to fit was brilliant. Where there's a will there's a way.

@3DPrintedProps 6 лет назад

Great idea, I was going to use some of that clay that hardens but I was out.

@Howard_T_Duck 6 лет назад

Great work Kev!

@reinmannol 6 лет назад

Absolutely Amazing!!!!

@3DHP 6 лет назад

Awesome Job,You Rock.........

@kevinvolo5208 6 лет назад

Thanks man!

@davidschwartz3383 6 лет назад

Sick Kevin!

@3DPrintedProps 6 лет назад

Thanks!

@lildude6906 6 лет назад

Absolutely insane! Incredible job. Any plans for weathering?

@3DPrintedProps 6 лет назад

Ha, you know, I was going to do that and I just had to take a break from it. It was a killer. So yes, I'll be doing a weathering vid soon. It's going to be tough to mess the thing up though. :P

@yonallb 6 лет назад

First coffee! lol, this is the fist video of yours I have seen. Seriously nice work. Will stay subscribed.

@darnellio Год назад

What kind of clear coat would you recommend for this helmet? I feel like a gloss would be the wrong choice but have limited experience with painting helmets. Thanks in advance!

@luiscarreno5228 Год назад

hola, muy bueno, pero ahora no me lo puedo sacar, se me atoro llevo 2 horas tratando de sacarmelo, algun consejo?

@1937Brett Год назад

What do you know of using resign instead of filler primer to fill gaps

@sjmaguirepdx 10 месяцев назад

BTW - The link to the Star-Lord eyes on the RPF doesn't work... Anyway, thanks for the video. Will definitely be checking out more of your builds.

@robbygrant6441 3 года назад

Amazing work! What kind of black base lacquer did you use :)?

@3DPrintedProps 3 года назад

Was a while back but I think it was a Rust-Oleum brand.

@fiznits237 Год назад

What paint did you use for like the main silver metal color?

@keanbobeanbo1486 5 лет назад

This video convinced me to get this file to work on, nice work! I am trying to figure out how to slice the pipes off for separate printing, did you do plane cutting or is there an easier way to split the file? I am using meshmixer at the moment and am afraid I'll make it asymmetrical if i try to eyeball it. Any pointers would be greatly appreciated! Keep up the good work!

@3DPrintedProps 5 лет назад

I don't believe I had to cut them off. I think I just chose separate model and it separated pretty much everything, and I picked what I wanted to export as stls.

@keanbobeanbo1486 5 лет назад

That's what I was afraid of. The model they sent me is a completely fused piece, and separate shells won't work on it. I'll send them an email and see if they can send me the un-fused version. Thanks!

@MrGZM90 4 года назад

I like to add the top on the mask.

@originallyawesometv5382 5 лет назад

You could do a really good drax cosplay you look just like Dave Bautista

@3DPrintedProps 5 лет назад

I think you're the second person to say that. I don't see it, but cool. :)

@alpachino468 5 лет назад

@Originally Awesome TV - I think you ought to get your eyes tested, dude...

@Custom3dPrinting4U 5 лет назад

Can you share your exploded view STL files? Or no

@3DPrintedProps 5 лет назад

Sorry, can't share those, they are paid files from DO3D.

@Custom3dPrinting4U 5 лет назад

@@3DPrintedProps all good. Thank u

@TheRealKingDong 6 лет назад

Also I know it may seem simple to you but can you show how you put the elastics on the inside as i think thats a great alternative to magnets and shitload easier! lol thanks!

@3DPrintedProps 6 лет назад

I'll see if I have some video. But what I did was tape the helmet together with blue tape, cut the elastic to there was enough to give some stretch, then super glue it to the helmet. I used little clamps to hold the elastic down to dry. That was it. I was going to do magnets but then I was like, I need this to have a little give, and elastic popped into my head. :)

@TheRealKingDong 6 лет назад

3D Printed Props was the like waistband type of elastic?

@3DPrintedProps 6 лет назад

Yeah, I'm pretty sure it was this. www.joann.com/dritz%23174%3B-1.5-soft-waistband-elastic-black/15377427.html#q=Elastic%2BWAISTBAND&start=1

@jameslopez7685 6 лет назад

wow amazing & add more video

@dianestrickland4859 6 лет назад

Spend a great time

@pixeljunkyNL 3 года назад

Hi. Great work! I have the EXF-Collectible's Star lord helmet. Planning to add the red light lenses. Do you have any advice? I'm not that crafty as you though...

@3DPrintedProps 3 года назад

Well I bought those lenses. I found them on RPF. But all you would need is to cut and sandwich some plexi with LED in-between.

@danielwalker8961 5 лет назад

Bro... HOW DO YOU MAKE THE BASE? YOU DIDNT TELL US!

@3DPrintedProps 5 лет назад

Hey, What do you mean by base? thnx

@danielwalker8961 5 лет назад

@@3DPrintedProps the part before you sprayed it

@fanatic2866 6 лет назад

Would you still prefer the 3d printed version with all that work over a resin kit? (with less hassle to it?)

@3DPrintedProps 6 лет назад

Fanatic good question. I'd still do this because I really learned a lot.

@fanatic2866 6 лет назад

3D Printed Props Is it true that you save a lot of money with 3d printed props? How much did you have to spend in total?

@3DPrintedProps 6 лет назад

Good question. A roll of filament coats about 13-20 bucks. I get hatchbox so it runs 20. That helmet took pretty much a whole roll I think. So I'm in 20 for the helmet. But yeah, it took weeks to finish here and there when I could. And u need other things like sanding paper, Bondo, paints, etc. But if I had to put a tag on it, just materials is say 20 for filament, 15 paint but I have plenty left, eyes were 15 think. So 50 bucks. Not bad. And I learned a lot and of course i.love making stuff.