Тёмный
No video :(

Starkey 2005-2012 Mustang Puddle Lamp Kit Installation 

Starkey Products
Подписаться 2,1 тыс.
Просмотров 22 тыс.
50% 1

Puddle lamps became an option on 2013 Mustangs, but were absent on 2005-2012 Mustang trims. Now available from Starkey is a high quality puddle lamp kit for any 2005-2012 Mustang. Our lamps use LED bulbs and are designed to be low profile and easy to install! Multiple colors available!
Follow along as Jason installs the Puddle Lamp Kit on this 2010 Mustang Coupe. At the end of the video you'll see the lights in use at night.
Puddle Lamp Kit - Part Number 3490 =
www.starkey-pro...

Опубликовано:

 

28 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@billh3860
@billh3860 7 лет назад
Just now finding out why you guys likely elected to NOT perform this task on the '05-09 models. I'm working at the drivers side inner left side cowl and am just about at my wits end because of the coachwork and the double-wall I find here on my 'vert. I'm so far into it that I want to keep going but, hey! This is nuts!
@Mikey3200
@Mikey3200 9 лет назад
So much work for something so simple, I hate being lazy...
@bbstar54
@bbstar54 9 лет назад
Mikey3200 I would only deem it useful if it were the pony logo one's. I was surprised to see just regular lights there.
@StarkeyProducts
@StarkeyProducts 9 лет назад
bbstar54 Thanks for the feedback. We actually explored this option but Ford has been plagued with problems involving their new projector pony puddle lamps. The pony logo is chipping off/ smudging, etc after only a few months. While this doesn't project a pony, it is much easier to install (the pony projection lamps must be epoxied into place when retrofitting) and is more reliable.
@steveo0217
@steveo0217 4 года назад
Do they have this with the mustang logo for thea 2012 rather than just a plain light
@georgegualeii9273
@georgegualeii9273 8 лет назад
When feeding the wire through the connector into the cabin, there's barely are room. Will the wires still be okay as long as they are on the side with the notch?
@StarkeyProducts
@StarkeyProducts 8 лет назад
+George Guale II Yes the will be just fine as long as they are fed on either notched side. The wires have a low enough profile that it won't be an issue.
@magdalenamagadan4712
@magdalenamagadan4712 3 года назад
If I want to add a Flaming Horse Logo Car Door Laser Projector Shadow LED Light for Mustang 2014 can I connect to the same hornest or do I need to connect different wiring
@StarkeyProducts
@StarkeyProducts 3 года назад
Should be able to connect to the same circuit with no problems, as long as the LED you are using is intended for 12v systems. Good luck!
@stevied5648
@stevied5648 5 лет назад
so what happens when you're driving and turn on your map light? Will the puddle light come on as well? I don't want to get pulled over. Thanks
@StarkeyProducts
@StarkeyProducts 5 лет назад
Stevie - great question. No they will not come on if you use the push button above to activate the map lights individually. - Jason
@stevied5648
@stevied5648 5 лет назад
@@StarkeyProducts Thanks
@lancebrown8823
@lancebrown8823 4 года назад
Will this work for 2020 Mustang GT base model 301A wirh no heat or blinker.
@StarkeyProducts
@StarkeyProducts 4 года назад
Hi Lance - We havent tested it on the 2015+ platform, but you should definitely be able to connect to power inside the passenger compartment like our #3640 Footwell lighting kit does.
@bridgettlozano2979
@bridgettlozano2979 9 лет назад
Would anybody happen to know if any fuse could be the problem to this kit not lighting up?
@StarkeyProducts
@StarkeyProducts 9 лет назад
Bridgett Lozano It could be an issue, do your overhead map lights still function? If they do, it is not a fuse issue. I would recommend taking a look at the wiring behind the A-pillar next and make sure it is connected properly. Feel free to call our tech support line or email us if you need assistance!
@7gators7fan7
@7gators7fan7 6 лет назад
Can this be used for a 2017 model?
@StarkeyProducts
@StarkeyProducts 6 лет назад
You definitely could, however the wiring you tap into inside the car would be different. Also the 2015-2017 mirrors come apart a little differently and it is more difficult to take them apart, which is one of the reasons we never created a kit for the 15-17's.
@whpony96
@whpony96 Год назад
Every-time I see wire-taps used I just cringe...(By all means keep using wire-taps if you want to hunt down intermittent connection problems down the road.)
@cooleo9853
@cooleo9853 7 лет назад
way to much work
@Buyford28
@Buyford28 4 года назад
WAY TOO MUCH WORK for this guy.
Далее
2013-2014 Mustang LED Puddle Lamp Kit Installation
8:03
WELCOME TO THE FAMILY, MOE! (Brawl Stars Animation)
00:40
🎙ПОЮ ВЖИВУЮ!
3:17:56
Просмотров 1,5 млн
How to TRANSFORM Your 05-09 Mustang Steering Wheel
4:00
5 Tips and Tricks For Your 2005-2009 Ford Mustang
4:04
2005-2009 Mustang Fog Lights Wont Turn On
1:43
Просмотров 24 тыс.