No video :(

Starting a Boat on the Trailer with a fake a lake motor flusher

Подписаться 23 тыс.

Просмотров 43 тыс.

50% 1

Product Links:
Engine Hose adapter: amzn.to/3m0q7pS
Here’s how I start my 2008 Mastercraft X2 while it’s on the trailer out of the water, I’m using a flush buddy fake a lake motor flusher. This allows me to flush the engine, or get it up to temperature so I can change the oil and also to test it out before I take it to the lake. The above links are my Amazon Affiliate links, as an Amazon Associate, I earn from qualifying purchases. Thank you for supporting my channel!

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@wadehaynes9851 2 года назад

Nice boat - thanks for the demo!

@Myksgarage 2 года назад

👍

@Myksgarage 3 года назад

Link to the flusher used: amzn.to/3m0q7pS

@martinschubert8388 2 года назад

She sounds great!

@Myksgarage 2 года назад

Yeah, it has a nice rumble when out of the water!

@mariopantoja3908 2 года назад

Great video no BS like so many others nice job buddy 👍

@Myksgarage 2 года назад

Thank you!!

@riveradventures7185 4 года назад

Start engine first. When it's running water gets blown out not running it can get into the piston through the exhaust port. I've had that problem before then you'll hydrolock your engine.

@Myksgarage 4 года назад

That’s true for a jetski engine. It would be very hard for water to get past the impeller, which is not moving, Therefore this is a safe way to start the engine.

@riveradventures7185 4 года назад

It's a beautiful boat by the way 👍

@Myksgarage 4 года назад

Thanks!!

@whitleyca 2 года назад

Hey Myk - GREAT video. Very informative. I just picked up the 'fake-a-lake' to get our boat ready for the season; run the motor, check for leaks, etc. I usually do this on the ramp when not busy, but now that I have the flusher attachment... Curious of any risks to be aware of if I run the boat longer than it takes to get to temp so I can crawl around the engine doing the inspection?

@Myksgarage 2 года назад

I’m not aware of any risks. I would just idle the motor if you have to rev it put it in neutral you want to make sure to not put it in gear and move the prop out of the water. Best of luck!

@arturogonzalez1155 Год назад

I saw that the temperature is going up , if I do this for to long , the boat will overheat ? Cause I saw that the temperature needle was passing the middle , thanx a lot

@Myksgarage Год назад

You want to make sure you have enough water flow and only keep it in neutral. Check your temperature next time you're out on the lake, could be either you need a new impeller or a thermostat.