Тёмный

Starting a laser engraving business the right way. 

Laser Engraving with Matt
Подписаться 22 тыс.
Просмотров 13 тыс.
50% 1

XTOOL MACHNES: US Store: bit.ly/3RaWeVo
UK Store: bit.ly/3uvqvW4
EU Store: bit.ly/47pTjh3
Carving Pumpkins with the XTOOL Diode:
• Carving a Pumpkin with...
Tractor Cut Files along with other SVG & PDF Files:
www.etsy.com/shop/Engravingwi...
Join my Patreon Group for 1 on 1 and group support:
/ laserengravingwithmatt
Check out our vlog channel, @Matt & Sara: / @mattsara2802
Don't forget to LIKE, COMMENT & SUBSCRIBE!
Click that 🔔 to be notified when our next video comes out!
Shop our favorites:
Thunder Laser: www.thunderlaserusa.com/machines
UV Laser: www.wiselylaser.com/Air-cooli...
XTool:
www.xtool.com/?ref=w86Oew0Jk4...
Mactron Fiber Laser: mactron.aliexpress.us/store/g...
Etsy Search Engine tool: salesamurai.io/.
Use Coupon Code: MATT20 for 20% off
Electric Sander: amzn.to/3MW8Hts
Vacuum: amzn.to/3MWsxVq
Vacuum Bags: amzn.to/3unFelI
Compressed Air: amzn.to/3Rc779p
Glue I love: amzn.to/3sTbpJl
Laser Dark: www.laserdark.com/order
Transfer Tape: amzn.to/3TjUHKo
Brilliance Spray: amzn.to/3LVTp84
Ruler: amzn.to/443IkIN
Caliper: amzn.to/436a3ap
Business Cards: amzn.to/3pgtuzr
JDS Patches: shop.jdsindustries.com
Item #PTHSET3A
Awesome Hats: amzn.to/3qLluGX
Cermark Black Spray: amzn.to/3qqndkM
Blue Tape: amzn.to/3qASP7z
Desk: bit.ly/3LhfYUC
Keyboard: amzn.to/3FB1MCm
Sanding Disks for glass: amzn.to/2JCm9W4
Laser Clamp Pins: www.etsy.com/listing/13720156...
Best book for beginning your business (Hard copy or audio): amzn.to/3tVg0ef
3D Printer: s.zbanx.com/r/bjgWdKwKDDxY
ref=w86Oew0Jk4nD&
Powder Paint: amzn.to/3Nhq5qS
Gasket Making Material: amzn.to/3ls4C2h
Blue Tape: amzn.to/3FNzS3a
LA's Totally Awesome Degreaser: amzn.to/3tGhmaT
Super Clean Degreaser: amzn.to/3oIvBt5
M8 Fan: amzn.to/2Z08qQr
External Hard Drive: amzn.to/32OVoqy
Cermark: amzn.to/3EKxbAj
Bottle Openers: amzn.to/3i1xsoS
Dusting Spray: amzn.to/3znltIM
Rubbing Alcohol: amzn.to/3Bv3OQb
Q-tips: amzn.to/3BihFZK
💡 Lightbox : amzn.to/31h1GLC
Corel Draw Software: amzn.to/3pG3wzW
Sandpaper Blocks: amzn.to/3pVQVrV
Clear Coat: amzn.to/2LOM3qr
🖨️ Our favorite label printer the Rollo: amzn.to/2IVCVyV
🏷️ Flat 4x6 labels compatible with the Rollo printer: amzn.to/3pMawvO
📸 Camera: amzn.to/3iuYsLE
🔺 Tripod: amzn.to/2QgipJM
Scale: amzn.to/37IE2L7
Drop us a line ...
Laser Engraving with Matt
PO Box 9
Carver, MN 55315
Send Business Inquiries to: homesteadingyt@gmail.com
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting us so we can continue to provide you with free content each week!
Music: Courtesy of Epidemic Sound
#laserengravingbusiness #laserengraving #laserengravingforbeginners

Хобби

Опубликовано:

 

2 фев 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 63   
@TactlessWookie
@TactlessWookie 5 месяцев назад
Matt, thank you. It's nice that you show us the fails in addition to the nice end product. I've learned a lot from you!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks and I am glad to help.
@plscholl6304
@plscholl6304 5 месяцев назад
Really appreciate you showing all the real challenges engravers face.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Absolutely 😃
@stevencallahan6815
@stevencallahan6815 5 месяцев назад
You are a inspiration to me thank you very much for all of your videos. You are easy to understand and very informative. My wife and I have had her part-time business for about 7 years. We did the whole vinyl Cricut thing when it started, as well as small items with a glowforge and I just got a nova 35 and going to quit my FT job in a few months when our 1st baby comes and do lasering for a living. When I started researching thunder, I found you, and I'm so glad I did. Again, great videos, buddy. Glad I got to see you again!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thats awesome and congrats 🎉
@GetRealwithMike
@GetRealwithMike 4 месяца назад
That's awesome. Simple and clean. And it was nice to see I'm not the only one having issues with equipment. That's what set your videos apart from the others.
@laserengravingwithmatt
@laserengravingwithmatt 4 месяца назад
😃
@rickpouley7561
@rickpouley7561 5 месяцев назад
Great tractor idea for sure.. Looking forward to the rest of your videos.. Keep up the good work.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks
@EverydayArmyWife
@EverydayArmyWife 5 месяцев назад
I really appreciate your videos and your willingness to show us the basics!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks 😊
@Kurutzkraft
@Kurutzkraft 5 месяцев назад
Great video Matt :) thanks for the tips and tricks.
@tennesseewoodsigns8637
@tennesseewoodsigns8637 5 месяцев назад
Thanks Matt! Looking forward to the rest of this series!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
thanks
@jaycunningham2723
@jaycunningham2723 5 месяцев назад
It's always real with you Matt! Enjoy your videos. Having fun running my Thunder 35/100.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks. I love my 35/100
@russmartin6330
@russmartin6330 2 месяца назад
Great video! Thanks for inspiring all of us!!
@laserengravingwithmatt
@laserengravingwithmatt Месяц назад
😃
@Pens-and-morez
@Pens-and-morez 5 месяцев назад
My guy, I’m just getting into laser engraving trying to get into that full time spot, just followed thanks for the tips
@minnesotamaker1846
@minnesotamaker1846 5 месяцев назад
Great video Matt. Looking forward to the next one.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
😃
@chrishead2391
@chrishead2391 5 месяцев назад
Yes, Love this idea, please keep it going!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
😃
@GoCreateSomething
@GoCreateSomething 5 месяцев назад
That tractor window is a good place for a baby picture. It would be pretty simple to make a little stand so people can use it as a picture frame later.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
That is a brilliant idea
@lightspeedlaserengraving6048
@lightspeedlaserengraving6048 5 месяцев назад
😅great video. Looking forward to the rest of this series
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks 😃
@sgtserginsky
@sgtserginsky 5 месяцев назад
Thanks for sharing. I strongly agree that LB is much better software than xcs. The only good thing about is the camera feature. Suggestion. I wanted to share that my computer is in a different room than my machine. I can still use LB to run my P2. I use a usb over ethernet adapter with a 50ft ethernet cable. Works fine for me.
@scamp1203
@scamp1203 5 месяцев назад
Thanks Matt I enjoyed your video. Getting my first laser delivered on monday it's an ikier 36w diode. I'm hoping that's a OK laser to start with .I would love to get to where your at someday. I'll be watching and learning. Cheers!!
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Congrats 🎉
@Hesawheleft
@Hesawheleft 5 месяцев назад
Thanks Matt! I love the tractor idea. Just getting started on engraving. I love it. What was that glue recommendation? I couldn’t catch it in the video.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks. The glue is in the description
@Hader07
@Hader07 5 месяцев назад
i have a question, but it may be more than can be answered here on RU-vid. if you are starting out on a limited budget would you get a k40 type LASER or would you get a LED LASER
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
That’s a toss up
@dillongoines4174
@dillongoines4174 5 месяцев назад
What kind of plywood do you on these types of projects? I’ve had problems with voids and things not cutting cleanly every time ive ever tried to buy 4x8 sheets of thinner plywood locally
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
I got the second cut stuff from HoneDeopt. 1/4 inch birch but it’s actually .20 mm
@austincotton4245
@austincotton4245 5 месяцев назад
Yo Matt. Does your router have a dual band connection? As in does it automatically switch between 5 & 2.4 connection? My S1 would not stay connected to my network and I had to go into my network and adjust it to be two different networks with a dedicated 2.4 connection for my S1.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
I didn’t even think of that. Thanks I will check that out.
@hussainalhabib1154
@hussainalhabib1154 Месяц назад
Great video I would like to ask what kind of paint did you use ?
@laserengravingwithmatt
@laserengravingwithmatt 29 дней назад
PPG out door
@wayneheywood4545
@wayneheywood4545 5 месяцев назад
Just bought a K40 . Im a diode guy till now. Any tips ? Appreciate your work and effort. Keep it up.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Have patience and you will be fine
@samsanderson7159
@samsanderson7159 5 месяцев назад
Are you just using interior latex or something like acrylic paint?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
I use ppg exterior paint. 😃
@RubberheadStudios0001
@RubberheadStudios0001 5 месяцев назад
Matt do you cut mild steel or stainless with your lasers?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
No
@garynunncreative
@garynunncreative 2 месяца назад
what kind and brand of paint is that you are using?
@laserengravingwithmatt
@laserengravingwithmatt 2 месяца назад
Outdoor paint
@stewartwhittier3455
@stewartwhittier3455 5 месяцев назад
Good job Matt. Name of glue?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks. It’s in the description.
@AcrylicMemories
@AcrylicMemories 5 месяцев назад
but why wouldn't you just make adjustments and cut the same board again instead of wasting it?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
I did. It was charring the edges, so bad I didn’t want to use it. I also like to show all my mistakes because I’m not perfect.
@robr6925
@robr6925 5 месяцев назад
Does this laser have air assist?
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Yup. It’s built in. I had it at 100% for cutting
@robr6925
@robr6925 5 месяцев назад
@@laserengravingwithmatt Thanks Matt
@Metal_Vistas
@Metal_Vistas 5 месяцев назад
I've watched a few of your videos and I have enjoyed them, but I was struck by what a bad idea it is to paint wood inside of your expensive laser. I fail to see any advantage to doing that, and it opens the possibility to problems occuring.
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks 😃 painting with a brush won’t hurt your laser. Spray paint I would never recommend. 😃
@Metal_Vistas
@Metal_Vistas 5 месяцев назад
@@laserengravingwithmatt well I guess if you've never had an accident in your entire life, you're a better man than I am. Carry on.
@b26leather29
@b26leather29 5 месяцев назад
Sorry but way too much pointless talking
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks 😃
@700Junky
@700Junky 5 месяцев назад
Another great video Matt. Love your content and thanks again for replying to my email. DC
@laserengravingwithmatt
@laserengravingwithmatt 5 месяцев назад
Thanks. 😃 no problem
Далее
Is this the BEST niche on Etsy for laser products?
20:20
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
Start A Laser Business NOT On Etsy! Think Services!
19:04
How to make Money and Price your Laser Engraving Work
14:44
Shutting The Doors to my Thriving Laser Business
24:24
Просмотров 156 тыс.
EASY projects to engrave and sell FAST
12:48
Просмотров 362 тыс.
Top 10 Laser Engraving Pro Tips - Wood
20:58
Просмотров 69 тыс.
CAA Conversion kit at ZAHAL 🎯
0:14
Просмотров 67 млн
РЫБАЛКА ДОМА
0:17
Просмотров 10 млн