STARTING the $38,500 MCLAREN after 2 YEARS NOT RUNNING...WILL IT RUN???? (PART 2) 

If me spending $10k on used parts doesn't get you SMASHING that like button, I don't know what will!!

A running engine and a 2nd baby on the way ?!?!? DOUBLE CONGRATS!!! 👏👏👏👏👏👏

I really appreciate you taking time to explain the planning phase of the build, the steps to be taken. Puts all the manual labor into perspective... you take on a lot mate. Hats off !

You can see the relief on his face when the motor started. You're on your way to having this on the road, bro.

You had me on the edge of my seat with the cold start... 😂 Keep plugging along. The videos look great!

You blow my freaking mind with this series and how hard you work. You're a very talented man.

At least the engine runs now, that's one big headache out of the way. Take your time to put it together! Looking forward at the finished result!

Great the engine starts!, and your reaction 🤠 Hope all goes well with the parts etc and i am looking forward to the course of the build! Keep up the good work.

17:05, I really noticed that smile on my face😊

Your wife coming out to show her support really means a lot. Kudos to her. 👍

From an Amazon electric motorcycle to a McLaren. Wow, impressive bro. Keep up the quality content.

I am absolutely enjoying this pivot in your content creation. Good job sir 👍

You rock bro. Keep up the good work. Rly looking forward for next clip 😎👍

Good luck man I pray you get it on the road soon as possible 🙏🏼 💪🏼 🙌🏼 👍🏼 💯 👌🏼

Keep building your dreams! Been watching your videos since your early e-bike review days years ago, now look where you're at... keep going!

Glad to hear that motor start up. Looking forward towards the advancements of getting your car back on the street. Congrats on the new edition to the family as well.

What a bad ass car! Looking forward to watching this build over time

Great video. I love watching this before going out and working on my 600LT!

Great video look forward to part 3👍👍👍👍

Congrats so far. It's not really hard to tell that you'll hit the road with it pretty soon. You got endurance with all the stuff. Your efforts will pay off at the end for sure. thumbs up 👍💪😁 Be looking forward for the next video.

So stoked to see it start!

From the days of the FZ6 videos, your first cafe build, and everything in between then and now, its been great to see you and your channel grow and thrive. A lot of hard work in both the vehicles but also in your channel! That devotion is paying off! Keep up the great work.

Videos look great, man. Excited to see how this progresses.

Great video series!

your doing a greatjob... ill keep watching

I'm really enjoying you Channel and I wish you all the best Good luck with the Build

Well done mate keep up the good work

Thanks! Been watching since the crazy chinee car videos, great fun!

Keep up the hard work ! This ride is going to be amazing

How Cool was That ,Even your Misses Was excited it Fired Up , Classic

I love how far you have come and I love the t shirts you wear!

Inja you ROCK!!! I crossed my fingers when you went to start it and said if anyone deserves it to be a running car he definitely does. So glad it does and now you can move onto making it whole again in true Inja style LOL BTW I love the color as most exotic cars seem to be RED, yellow or black. Nice seeing a deep metallic burgandy. keep up the good work brother and CONGRATS on the newest member that should be here soon! Happy Holidays

I'm excited for you bro!

Great project! The last time I saw this channel was a few years ago when you're in Fresno and now moved on up to Clovis.

It's coming along great mate an I'll see you on the next one

Amazing so pleased for you🎉 love the wheels on it 😊

Hey, I just found your channel and I have to say that you and your content are awesome! I saw your first MCLAREN vid and I became a fan of yours instantly. especially when you named some other you tube car influences. I loved the "Driven Daily Exotics" LOL!. I am a huge DDE fan. " Daily Driven Exotics" I can't wait to see what you do to your new car! Love from Ontario Canada.

Nice work!

Your shirt got you a subscriber! Guns and cars are the way! I’m binging the episodes now to get caught up. Good luck brother!

Inja my boy, the car sounds really great and congrats on the new baby. God bless Bro.

Dude mad respect to take on a project like this with no lift, or garage. Been there, done that and it totally sucks! Subscribed!

Congratulations!!!

Well done so far !

man, this car's great you're getting all the good excuses to buy new tools/toys and order exotic car parts from the internet and you're learning and you're sharing with us while making a few bucks seems like a win/win deal if you ask me Thanks, Inja ! thatll be a great project to follow

You got me hooked....😂

very dope project my dude.👍

good luck!!!!!

The video qualities very good, appreciate your hard work

Congratulations 🎉🎉🎉🎉 on the new family member ❤

This is actually exciting.... I love it good program.... 😅

You won my sub bro!

To fix broken bosses and cracked fastener holes...fiberglass insulation mixed with 2-part epoxy works well.

Fire sauce!!!!! sounds NOICE!!!

How did this McLaren make it to so many places and NOT get robbed of all its parts? What a great find!

Sounds great!

Amazing project!

Happy for you ❤😊

From Greece have many wishes to complete the project. Welldone men

No blue smoke on first start! Excellent!

I gotta admit im happy it runs. Best of luck going forward with this

😎Big Kahunas to go in on this with a new-born on the horizon. BIIIIIIG respect 👍

Congrats on the new addition to the Inja clan may he/she be happy and healthy!

Speaking from experience with McLarens and track racing, the gas in the oil is a sign the valve guides need to be changed, there dried out or cracked. Its not the absolute end of the world, but can risk the engine if ignored. Worst case situation could be the piston rings could explain the missifre though, checking the plugs for fowling/oily, will tell you.

“I’m ok to spend this much” that was determined to be a lie 🤣🤣 Just got recommended your channel the other day, looking forward to more episodes of this build

Hallelujah! How fresh is it that it isnt a $47k lawn art! Get R Done right now, ie no bondo. Congratulations on the car and the family.

I envy u coz ur so knowledgeable… gud luck w/ d maclaren..

yes!!!! more videos

I'm going to subscribe and share

Good brother I just wanted to to see that mclaren finish 😎😎🤩🤩

I wish you the best rebuilding your Mc!

Love the content are you Ontario based btw? I see the timmies cup 😂

That ziptie extension cord under the hood, I think the previous owner tried to hardwire (run power/hot wire) power to the driver door (trunk latch power wire) in order/attempt to get the engine compartment latch open. If I were you, I'd go ahead and order everything. What cool about supercars (Mclaren/Lambo) everything can either be fixed or replaced. You're gonna love this build (adventure/project). I'll purchase the vehicle from you should you ever consider to sale the vehicle in the future?

Just subscribed from the UK, love the McLaren you've got. If I can help with parts I'd be glad to help we have a lot of 650s smashed in breakers here.

There’s not a test function on your autel for the engine cover? Cheers Pat 🇦🇺

Nice to see the engine running that’s huge 🎉🎉

Good job pro

Can't wait for the next VID....

Very good. 😊

Did you try Mullins Auto in Mt Olive, IL? They have Exotic parts, I think Tavarish got parts from them before. Good Luck.

If you haven't update the firmware on the Autel, might add some functionality you wish you had now. My old Autel when it was new there were updates to add newer cars and I was able to cross flash it to a identical looking model that supported a lot more functionality. I doubt there's too many better versions than what you have. It's great seeing you be able to get another dream car, even if you had to get a rebuilder.

Gratz on kiddo No.2!

Im pretty sure you can replace the nutserts for your speaker with new ones, then hold the old nutserts with grips to get the fixings undone

If you say it’s gone back to the default right hand drive settings, maybe see if there is a wiring loom in the right hand door to plug the switch into, it may help you open the engine cover🤷🏼‍♂️

love your channel first video i watched was part 1 and straight away's liked and subbed thanks for great content from Australia

Man seeing you go from a casual e bike/Chinese sportbike channel to a full blown multi motorsport channel with supercars?😮 u inspire man!💯

Very interesting on the door 😆

The nuts holding the speakers are called riv-nuts. They work similar to pop rivets. It would be easy to fit the next size in and file down the bolt heads to suit the speakers.

The look on your wife's face after hearing the car run was priceless! She's gotta be the coolest wife in the world, I'd say she's a one of a kind lady and you should let her get the first drive of the Maclarein just for allowing you to be able to buy this gamble of a vehicle buy lol

Please continue and document your journey 🥂

I like the direction you going. Big improvement. Just don't go down the same route as some RU-vidrs and start doing car lottery's. Keep up the good work 🔥💀

21k days overdue for an oil change? That's 57 years..... I dunno if I'd rely on that service notification completely 😂

Can you not pull the bonnet (hood) release and relevent wiring loom out of the left door and connect it to wiring loom on the right door as a temporary fix, or even is the wiring loom already in the right door and just again hook up the release button unit as a temporary fix. Basically fooling that part to been RHD, just an idea.

Subscribed from England UK for the McLaren project. Really enjoying it so far. Although that engine lid would drive me insane.

Good luck with the new baby

What about the Pyro fuse and the jump wire attached to the starter, why did they do this when the car can start?

The oil smelling like gas is not a problem just keep up on the oil changes. When you pull your spark plugs there going to have oil on them as well don’t be alarmed. It’s a mclaren thing 😊

$38,500 McProblem. lol. Keep it up bro.

I hope more people come back to the channel

Keep making videos on this mate I could see this really taking off for you. There’s a company here in the uk that’s huge and sends supercar parts to the US. Many RU-vidrs go to them because of price and stocks. It might be worth contacting them to see what they have. I can’t remember what they are called I know Freddie/Tavarish shops with them

I can't believe this is the same car you went to look at I guess he just didn't have the Vision you have or a scanner and patience I'm so happy for you and it looks great and sounds great man 👌🏽😎 and congratulations on the new baby in the wings you may have to swap this car for a seven seater don't say it i can hear your reply right now😅😂