Starting up n tuning the Team infinity engine of ACME

Подписаться 326 тыс.

Просмотров 317 тыс.

50% 1

Starting up and Tuning the Team infinity Engine of ACME Racing Buggy.
AliShanMao's EdgeTx Helicopter Model Files: bit.ly/alisedgetxhelis
AliShanMao's OpenTx Helicopter Model Files: bit.ly/HueyOTXHelis
Like my Work, Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinalishanmaoyt
New RC Helicopters: bit.ly/3Vn2CbI
Best RC Transmitters: bit.ly/3p6ibJD
My 3D models: bit.ly/2H3pxDH
My Social Media: alishanmao.bio.link
My BMC Store: bit.ly/alisbmcstore
Best RC Helicopters:
FW450 V3: bit.ly/3YT8qeF
Airwolf Shell: bit.ly/3kinLXt
Huey UH-1: bit.ly/3ugxzT2
Bell 206: bit.ly/3HCnVl4
Black hawk UH60: bit.ly/3TmnyxC
Sea Hawk: bit.ly/3G1KmQx
LED Strobes: bit.ly/3KxfM3l
FIMI Manta VTOL: bit.ly/mantafimi
W500 VTOL: bit.ly/yxw500vtol
Helicopters Spare Parts:
Huey UH-1: bit.ly/3SpmfPB
FW450L: bit.ly/3m4GOVm
F09S Seahawk: bit.ly/3lYgAUD
Bell 206: bit.ly/3INPDw0
FW200: bit.ly/3xPcAZn
My RU-vid Channels:
AliShanMao Channel: bit.ly/alishanmaoyt
Gaming Channel: tiny.cc/5s78tz
DIY Woodworking TV: tiny.cc/b4bbtz
Disclaimer: The links to products provided in my video descriptions are my affiliate links. If you order products using those links, there will be no price increase, but I will receive a certain commission on each sales from those links in this description. This commission income supports my family and help me continue to run and manage my youtube channel.
#hobby #drone #airplane #helicopter #autos

Авто/Мото

Опубликовано:

28 май 2009

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 180

@snoochiefanooch45 5 лет назад

Yes. half turn. 3 half turns is 1 and a half turns. I like your videos. SO MANY VIDEOS WITH OUT LSN SETTINGS! Thanks for this.

@bakerdude9000 14 лет назад

thanks a lot, really helped me! my HPI bullet was stalling at high speed but after tuning the engine as you showed it started up real nice and was running nice at speeds.

@_-ZaGaZ-_ 13 лет назад

Thanks fella - just got an acme condor pro and struggled starting it but followed this and much better :-) everyone ignore the warning about the low idle sticker - mine was covered and said do not touch but after removal and tweaking as said above mine started and ran much better.... good stuff Alishanmao :-) many thanks.....

@jdManiac 9 лет назад

isn't it 1,5 full circle? not 3 full circles i guess

@AndrewTrust 11 лет назад

Veeeery straightforward ! Excellent ! Thank you. I hope that this settings apply to my Savage 3.5

@MrRedneckrc 15 лет назад

Ali great video I have my low speed needle set good but when I give it full throttle with the wheels off the ground it is fine but when I am driving it the engine cuts out it does not even bog down it just shuts off. Thanks Ali you are the man !!!!

@Ecodent1 13 лет назад

Thanks I just got a acme condor pro plus and without your help I would of thrown it in the bin. It took a while even to start, but now it's starts good and I think it's running ok. Ps the don't touch sticker on the low end is in the bin.

@WelshCrossy 11 лет назад

Thanks mate i got it started it just needs a bit of running in cause it hasnt been used for awhile!

@iamthebollocks1 10 лет назад

so 3 circles is 1 n half then? if when i turn my throttle trim up on my control should it engage the brakes because mine does? please help!!

@dylanmabbott 14 лет назад

hi man thanks allot tuned my car today and it runs like a dream just like in your video once again thanks dyl

@TheRCBiker 14 лет назад

Well if the engine is different then the good default setting will be different :)

@bassman499 13 лет назад

thank you very much alishanmao for this car

@kxracer27 12 лет назад

on your controller there should be a dial labeled throttle trim. you want to back it down to where the engine will idle correctly without making the car go until you give it throttle.

@benhulm152 11 лет назад

oh my god this looks sooo good and proper thanks mate ill try this tomorrow

@MrGrahams1 3 года назад

Can you please tell what the low speed needle should be when using a sliding carb

@TheRCBiker 14 лет назад

you didnt mention it to me, but lean out the low speed needle a tiny bit :) If that doesnt help then higher the idle speed a little :)

@184philip 10 лет назад

Are the setings the same on the 4x4 thunder tigers as I have totally mest myn up and don't no what the factory settings where can you help please

@TheRCBiker 15 лет назад

why does the pull starter kind of get easier to pull once there is fuel in there?

@fpvgtking 15 лет назад

cheers man thanks for your help. keep those videos coming

@pilot74sparki 13 лет назад

Hi Ali, the 'team infinity' engine may be powerful but after running mine in I couldn't tune it and like you said easily overheat! I looked for air leaks and found after about 7 tanks that my engine backplate, carb mount, fuel tank & front bearing all had air leeks! So if you buy one take it out of car and check for air leeks first!

@01000001a 14 лет назад

@alishanmao Thanks.. ill try tomarrow. your a big help!

@jpatt5825 4 года назад

Hi. Just wondering what is that screw with that spring. I am having trouble with my acme conquistador i messed around with the carb when it wasn't running when i was drunk. Silly me. And now it doesn't run right. Can you help me please

@lukereidy100 14 лет назад

when u were doin full throttle was there loads of some coming out i am new to this and loads of ppl said to me when u are doin full throttle lots of smoke should come out.

@allen5976 6 лет назад

Have to agree below, you are only doing a half revolution, not a full , I’m new to this and now very confused Incase I’ll lean the engine out too much! Can you explain please?

@lukereidy100 14 лет назад

u are the best since i seen this vid i tuned my car the best and had no probs thanks man.

@lukereidy100 14 лет назад

i have set the engine up the same as u have and when i take the glow plug ignighter out the engine cuts out help.

@2010nosh 11 лет назад

Thank you soo much, i tried this the first time didn't work but then changed the batteries in my glow starter and :D

@traxxasdriver49 14 лет назад

what if you have a slide carb,are the settings the same or close. also thanks for the video it helped lots

@andersonsda1 13 лет назад

hi, i have a hurricaneXTR and im tunning it like you said,and when i start it the wheels wont stop spining(reving very very high)

@TheRCBiker 15 лет назад

why is the pull start hard to pull anyway?

@victorzamudio6049 7 лет назад

Hey bro im new on this just got mine like a week ago my rc trows lots of fuel from exhust like brown/ burn fuel and i think fuel tank emptys real fast..any advise Thank you

@bskarrattcrazyrc6659 6 лет назад

hi I have the exact truck and I'm stuck because I put the igniter in starts fine then I got to throttle it and it boggs down and cuts or if you no this problem them please let me now and how to fix it thanks

@blackopstyler2 10 лет назад

You should show one with .16 engine or hyper speed .16

@TheRCBiker 15 лет назад

Ali help me out i seriously dont get what you mean by flushing it to edges? :(

@dylanmabbott 14 лет назад

hi thanks i'v tuned like in this video and it runs like a dream thanks once again dude dyl

@232ian 13 лет назад

I have the 18 infinity engine which if set up correct runs with no problems. Have you seen the Team Infinity 21 small block which drops stright into a 1/10 scale. I`ve just got one and it looks like it going to fun!

@iamthebollocks1 10 лет назад

would this be the same settings for the firestorm?

@judem771 14 лет назад

thanks so much just got my acme a day a go

@richardparry1586 11 лет назад

Have you done a video for team infinity engine and a slide carb as that is what i have on my gs racing storm cl-1

@MrWarfd001 12 лет назад

hey do you have any trouble with the steering on this car when i have my steering on full lock it only turns around 5 to 8 degrees

@Jolinders108 10 лет назад

OMG socks with sandals !!@_@>> 3:34

@hoi4433 10 лет назад

I thought the same HAHAHA!

@imsoepicandyouknowit 11 лет назад

no problem and a little tip always run it leaner in the summer an run it richer in the winter its to keep it warm it the correct weathers sorry about thead spelling up here i broke my keyboard lol is fixd now

@lukereidy100 14 лет назад

1 outher thing is my back wheel on my nitro rampage the wheel is bent i think it needs a new hex i dont no how to replace it so the thing i whant to no is will it be ok to drive when i drive it you can see its a bit bent but it seems ok what do you think thanks for all your help

@rhysjakeman 14 лет назад

hey mine just wont start i changed the pull start with drill start did these setting it it dosent even start to run what should i do

@TheRCBiker 14 лет назад

Ali i dont have this truck, but I have a problem where the pull start handle keeps hitting the on/off switch off. Any ideas how to fix this? The handle must be loose?

@Hitman7901 14 лет назад

@alishanmao Can u do a ready to run for the avalanch and is that a good car what kind of feul can i use 20&?

@jameshone1000 12 лет назад

i got the same engine run nice put neededs new starter because it brock do you now what size it is

@Bmxmusikian 7 лет назад

Great vid mate thanks

@drakula 10 лет назад

very helpful thankyou.

@TheExceed1 14 лет назад

how much do the glow starters cost that have the arrow that show how full the glow start is

@electroverb 12 лет назад

Will these instructions also apply to the ACME .15 engine? Mine is badly out-of-tune

@fpvgtking 15 лет назад

hey i was just wondering, when u buy a new engine can u put WD-40 or a few drops of car oil instead of buying the that other oil or would it wreak up the engine. (only 1 or 2 drops of car oil)

@strattonterry7631 11 лет назад

Hi there I have a team infinity 18 engine in my acme condor but it doesn't seem to have the low end needle on it would this mean it is already preset or is it a fake engine?

@jammy1074 12 лет назад

I have the hpi firestorm 10t with G3.0 engine and I'm trying to get the needles set up right but it's hard to start and it cuts out when u try to change mixtures and the wheels are spinning unlike urs are stationary. The low speed needle is very hard to get at and last time I tried starting it the engine took of and revved freely. It doesn't like full throttle when u give it full throttle it bounces around on the limiter for 2 secs and cuts out. can you help please with the set up on the carb

@TheRCBiker 15 лет назад

Oh ok cheers ;)

@paulcharleshampson 10 лет назад

hey ali as a first nitro car inwant the condor pro but i ahve heard bad things . if i sort out the engin. e and upgrade it all to metal . how will it work? overal is the car going to run what would you advose getting and where from . bearing in mind im in the uk . thanks paul

@WelshCrossy 12 лет назад

My engine still doesnt start! It keeps getting flooded and the fuel is igniting when I use the glow plug??

@lukereidy100 14 лет назад

could i put my sh nitro engine in this car would i need to swap the linkages around.

@Jayman19971 12 лет назад

Once it started going fast what did u do because that happened to mine today and it took off and it was out of control

@TheRCBiker 15 лет назад

Ali am i right- if it boggs down at full throttle it means the low is rich- yes??? But however when i do pinch test it seems all ok- Could it be the HSN too rich?? cheers ;)

@TheRCBiker 15 лет назад

Ali, Could I replace the Team Infinity engine that is in my Monster T with the Engine thats in Volcano?? Cheers ;)

@viss3n 13 лет назад

@alishanmao hey there Ali is the acme cyclone a good nitro car? and i mean the kit version where i have to assemble it myself

@50geo50 14 лет назад

hey ali, i have a rc 1/5 truck (30cc) and the engine wont start(it's a pull starter) What do i have to do???

@PCRampagE 14 лет назад

when the pullstart is hard its only good, that means that u got a good compesion and hat good ! :) i got one question, i buyed a Team VTX with .26 engine.. what % of fuel should i use?

@01000001a 14 лет назад

ok. i just got my conquistador to start and i put it on a suport like in the vid. when i started it, it suddenly went up to top speed and took a long time to die when i held the fuel line. The idle is at lowest. is it just because there is no resistance or what?! please help!

@funnyguyjuan 12 лет назад

Can you do a video on how to keep the wheels from running when u turn it on????? Im having that problem with my redcat shockwave!!!!:)

@TheRCBiker 14 лет назад

well i understand people are having alot of problems, but i have three team infinity engines and i never had any problems with the engines :)

@elijaah81 11 лет назад

Does the high speed needle effect the idle in any way?

@christianm60 13 лет назад

@alishanmao I have a question about my HSP car. its smaller than your T-rex but by the same brand. It is a 1/16 scale Kingliness and the bell gear kept slipping. Nothing was stripped but wasnt meshing with the other gear. I disectited it and replaced a ball bearing with a washer. Then I find out there was no ball bearing in it then took out the washer, started but did the same thing. WHAT DO I DO!!!!

@lukereidy100 14 лет назад

this is the problems ive been having with my rc nitro rampage car is i think its called a receiver box. its a black box with a ariel coming off the end and it has three ports for three wires to go in it. so i snapped the ariel off it and i taped it up and it done rubbish losing signal all the time so i changed it and put my condor receiver in it would it be ok it seems to be working fine and i changed the Crystal in it so i can use acme remote and it all seems ok is it ok to use thanks.

@andywebb1607 11 лет назад

doz some one no y my nitro car cuts out when i but the body on ? thanks

@abane23 13 лет назад

Hey... I am a beginner and I do not no where to pick up the fuel. Could you help?

@01000001a 14 лет назад

I got it to idle right, but if i give it any throttle it dies. Any ideas?

@TheRCBiker 14 лет назад

hey ali :) at 1:46, you see the bell gear. well mine the side next to the flywheel has kind of discoloured slightly :) Just gone a kind of purple/ brown shiny colour ?? Is this normal?? Gear mesh is fine :) Cheers

@Julesdog4444 11 лет назад

Hi Ali. I have a problem with my car, I'm on the third break in tank and I have noticed a lot of oil on the underbelly of my car in the area of my exhaust and engine. Would it be possible for you to go through the possible problems of oil leaks in a video..... Thanks so much.

@TheRCBiker 14 лет назад

Is this the truck that they made ACME Attacker into? :)

@AllProKx65 12 лет назад

where is the idel screw on the condor acme???

@nubbynubs123 15 лет назад

So is there no mid range setting on this engine? It looked like u were seting the mid range but you were saying i was the low range. Most engines have a mid range needle that they say you should never change.

@andersonsda1 13 лет назад

hi, i have a hurricaneXTR and im tunning it like you said,and when i start it the wheels wont stop spining(reving very very high)and the engine stops!!!!!!!!! ;-(

@bencorbin52 6 лет назад

My goes full throttle on its own please help it won’t idle

@TheRCBiker 14 лет назад

So is that normal for new engines?? :)

@Julesdog4444 11 лет назад

This oil leak has hit my brake disc and now my breaks do not work and are slimy do to the oil.... Please help

@topshotta871 12 лет назад

hi i have a nitro car and when ever i start it the car just automatically starts to go and i dont want that to happen so how can i stop this from happening.

@JeffHardyFan6334 14 лет назад

can i put this engine on my 1/10 buggy speedy tiger please reply

@Norokdost 12 лет назад

Set the trim on the remote control keep turning it until the wheels stop spinning :-)

@Andyw1228 13 лет назад

Hi, how do you count a full circle? Thaat was one and a half (480°). 3 Circles would be 1080°!

@nath0987 15 лет назад

hmmm sounds like your con rods gone or like in my case on my car with acme .18 engine in the cogs are sheared hope this helps

@TheAwkwardBanana 14 лет назад

Would this method work for tornado s30??

@TheRCBiker 15 лет назад

Ali am i able to use the discount code on RedCat Racings website aswell?? ;)

@xXChapperz1Xx 13 лет назад

Hi there alishanmao what fuel do u use in this video plz comment back

@bestvideos37 12 лет назад

hey i really need help this is really important. when i start the engine up the car automatically goes off running at full speed please inbox me or comment telling me how to fix that problem

@PCRampagE 14 лет назад

@alishanmao ok, thanx m8. u are really helpful ! :)

@PCRampagE 13 лет назад

@alishanmao thanx man, tried 20 %, but i found ut that the 25% gave me more power and better cooling :)

@01000001a 14 лет назад

@jerbar120 yeah, but i also found that the head gasket thing is leaking too. :( sorry took so long to respond.