Steam Deck Teardown! - There's a secret inside the track pad...

Подписаться 9 млн

Просмотров 949 тыс.

50% 1

Its time to take apart the brand new Steam Deck! Get a 4-week trial, free postage, and a digital scale at www.Stamps.com/jerryrig. Thanks to Stamps.com for sponsoring this video! The Steam Deck is a slightly more nerdy version of the Nintendo Switch. Built for computer games its like a little PC in your pocket. (if you have really big pockets). Today we are goign to disassemble the new Steam Deck from Valve so we can see how it works from the inside. Where the fan is located, how big is the steam deck battery? and how things might be replaced.
STEAM DECK TEARDOWN SKIN: www.dbrand.com/teardown/steam...
Steam Deck Durability Test Video: • Steam Deck Durability ...
Get my Razor Knife here! www.jerryrigknife.com/
Replacement Parts: www.ifixit.com/Store/Game-Con...
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/2p7GtkX (GH6 amzn.to/3LyfW8d)
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Хобби

Опубликовано:

23 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@SalemTechsperts 2 года назад

I can't overstate how much credit Valve deserves for making almost everything modular and selling genuine parts to consumers. I lobby for Right to Repair here in MA and on the federal level, and sometimes it feels like I'm yelling at clouds. Seeing a product like this gives me a little morale booster. Awesome video man.

@zenvio 2 года назад

this comment should be more popular

@potatopotatopotatopotatopo8746 2 года назад

This kind of comments should be at the top and not the typical shitty jokes that are on the top most of the times

@vogel2499 2 года назад

I could see this backfired. Retards will repurpose the hardware for heinous stuff, forcing Steam to "regulate" the product.

@canny1913 2 года назад

Battery replacement sucks but others good

@cameronbosch1213 2 года назад

@@canny1913 I agree. Sadly, this isn't the first time Zack didn't do a full teardown due to a heavily glued in battery (I think the Samsung Galaxy Z Fold 2 was the other one). But compared to Sony and Nintendo, it's a MAJOR step in the right direction.

@mugglepower 2 года назад

I am stunned by the lack of soldered wires. Most things seem to plug in, which is just great for repairs.

@philip5463 2 года назад

@@mugglepower thats a great idea

@pedro4205 2 года назад

And than they fuck it up with the glued battery

@CaptainCook83 2 года назад

Like a little lego?

@khendrian 2 года назад

@@pedro4205 at least glue isn't the worst thing ever. Although with how little space there is to pry it up, this does look like much more trouble to replace than the switch even.

@khendrian 2 года назад

@Danish Amin what's that supposed to mean?

@Flabbergash 2 года назад

This is cracking. Valve deserve major credit for making it is repairable.

@M1LAD81 2 года назад

The trick with screws that go into plastic posts is to pop the screw in place and turn anticlockwise. You will feel the screw fall into it's original threads, that way you don't chew up the material inside the post. It will be as strong as before. Always use this method for plastic and wood.

@DragonProtector 2 года назад

yup!

@taze27 2 года назад

Wow, that's a good tip. When I craft stuff and have to unscrew something, I'm always upset because the fastening would never be as strong the first time around. But if what you're saying is true, I try it out.

@muh1h1 2 года назад

@@taze27 I can confirm it works, i'va also always been doing it like that.

@popefacto5945 2 года назад

This works for machine screws, too. Highly recommended when putting stainless steel screws into aluminum (such as in a bicycle).

@realkrzaku Год назад

Not as strong as before, those self taping into plastic screws get destroyed much much faster than with metal threads. What a poor cost cutting measure by valve...

@Spark_of_Fate 2 года назад

About self-tapping screws. I learned this from a friend who's an engineer. You want to counter-cloclwise turn the screw until it "clicks" and falls into place. From there, turn clockwise and it will fall into the pre-existing threading.

@jreererer8490 2 года назад

You don't need to be an engineer to know this

@donagnew8481 2 года назад

and not just self-tappping

@EV-olution 2 года назад

Yep, and I have been doing that will all types of screws for years since it avoids cross-threading. Thanks for sharing this as some people may not know.

@billy9506 2 года назад

This is common knowledge - no engineering degree required.

@AllY0urB4se 2 года назад

I do that with any screw into plastic also

@PenguinYayOne 2 года назад

9:59 No, the battery is not only 1000 mAh larger than the Swtich battery. The Switch battery 4310 mAh but at 3.7V, the Steam Deck battery is 5200mAh but at 7.7V. Which means the Steam Deck battery is 40 Wh while the Switch battery is only around 16 Wh. So the correct way to measure is that the Steam Deck battery is 24 Wh larger than the Switch battery, around 2.5X bigger.

@ShahZahid 2 года назад

i think you mean 7.4v (3.7 x 2) typical 2s battery

@PenguinYayOne 2 года назад

@@ShahZahid The official rating is 7.7V, look at he battery at 10:02

@ShahZahid 2 года назад

@@PenguinYayOne hmm you are right appears they are using some custom batteries, generally the voltage is 3.7v per cell, here it is 3.8ish v, well the more the better

@dutchducks5451 2 года назад

Wh is wh.. does not matter the voltage

@johnnylucas1249 Год назад

@@dutchducks5451 Wh = Ah*V

@TechSpaceCowboy 2 года назад

The SSD’s are indeed swappable for any who wonder. I did an upgrade on my 64gb up to 256 and saved a bit of money

@jaybrizzy820 Год назад

oh man, i wish i knew this before i reserved mine

@TimTheTiredMan 2 года назад

Steam deck is hands down the most impressive piece of tech I've ever wanted to buy

@mcgravitybuilding7346 Год назад

And do you have it?

@TimTheTiredMan Год назад

@@mcgravitybuilding7346 I have since received mine! I'm loving every second on it

@TimTheTiredMan Год назад

@@mcgravitybuilding7346 I have received my unit since commenting 3 months ago

@Anonymous-qb4vc Год назад

Handheld pc in console form

@Shmynkellbonkenstein 2 года назад

Yesterday I opened my deck to fix the sticky b button and I’m impressed how logically everything is laid out. The joysticks are going to be super easy to replace if you ever get stick drift.

@PCGGC 2 года назад

There's a couple places looking at making magnetic actuated sticks too that won't ever drift!

@BurritoKingdom 2 года назад

Alps is the only manufacturer that makes analog sticks for game consoles. I think they engineer it to eventually wear down. Another manufacturer has to be step up and start manufacturing analog sticks.

@rossh18 2 года назад

How did you fix it can I ask? Mine is starting to stick and I really don't wanna RMA it again lol

@Shmynkellbonkenstein 2 года назад

@@rossh18I basically took it apart and removed the buttons. Then I polished with fine sand paper in the cutouts in the case where the buttons go through. Sorry, I’m not super good at these things so can’t explain well. Just make sure to remove sd card and unplug the battery before going further. Watch ifixits and gamersnexus teardowns before you do anything. After doing this, I haven’t had any more sticky buttons (for me the x and b buttons were sticky, now nothing).

@Shmynkellbonkenstein 2 года назад

@@rossh18 it’s quite a few steps to get to the buttons and I’m very sorry I can’t explain it to you any better, but if you watch teardowns you’ll probably figure it out. At least it takes less than 2-5 weeks to fix!

@OllAxe 2 года назад

9:59 Not only that, but at 7.7V it's got over twice the voltage of the Nintendo Switch's 3.7V battery, giving it effectively 2.5x the capacity (40.04 Wh vs 15.947 Wh). That is of course to power the much more powerful and power hungry SoC found in the Steam Deck. Despite its much greater battery capacity, the battery life of the Steam Deck is pretty similar to that of the Nintendo Switch.

@jaroslavmrazek5752 2 года назад

Well of course, but since it is much more powerful and has a bigger screen than the og switch i believe its a good trade off.

@OllAxe 2 года назад

@@jaroslavmrazek5752 Yeah absolutely, I wasn't trying to turn it into a debate of which is better. They're very different products for very different demographics. I was just saying that the Steam Deck has a much larger battery than the mAh number would suggest, and that the reason for its having such a large battery over the Nintendo Switch is to compensate for its much more powerful hardware, not to achieve better battery life than the Switch.

@dutchducks5451 2 года назад

Ya it does not work like that...

@OllAxe 2 года назад

@@dutchducks5451 Is watt hours not a more accurate measure of energy than ampere hours? I was under the impression that the latter is a measure of number of electrons rather than energy. If it does not work like that then please explain. I'm a software developer, not an electronics engineer 😅

@kamm3021 2 года назад

@@OllAxe which game is he playing at the end of the video ?

@lilnjito2 2 года назад

3:23 "To help keep things organize. I'm a fan of that." Classic pun from Jerry

@jagdeepbhatt 2 года назад

Love the way they made it easy repairable by putting separate boards for almost every important function.

@matthewlewis5631 2 года назад

The metal can appears to be a shield - especially because of the copper trace for its footprint with what looks like spring contacts. It’s job is to keep EMF in or out, depending on the application.

@Voyajer. 2 года назад

My first thought was an EMI shield as well, nice to see they stuck thermal pads on it too since air drags over it.

@zooper6453 2 года назад

I've repaired dozens of different school issue chromebooks and laptops, and I must say there is a striking resemblance between the steam deck and these computers in how they are connected with tons of ribbon cables and just the way they're assembled generally. These make for easy repairs, so well done Valve.

@sogwatchman 2 года назад

2:30 Decent drawing of a Tesla Valve on the back of the Steam Deck.

@dworkin7110 2 года назад

Yeah, noticed that myself but figured someone else would have got here first ... and its you Watchman :)

@Venoxium 2 года назад

I'm really happy that Valve is taking the reparability approach.

@tommihommi1 2 года назад

the mAh aren't useful to compare. The Switch uses a lower voltage battery, so the difference is much bigger. The actual energy stored is the Wh. The switch is 16 Wh, the Steam Deck 40.

@AxelWolstenholme 2 года назад

Was just about to comment this, yea the steam deck battery is actually 150% bigger

@OopsieGoopsie 2 года назад

@Don't read profile photo ok

@Noah_Zion 2 года назад

Yess

@rubenayla 2 года назад

Thanks! We have to stop using Ah as unit of power

@nah95 2 года назад

This one seems to be more than twice the voltage of most phone batteries.

@ramijkhan2.089 2 года назад

So here we are with jerry teaching us anatomy lessons through a gaming handheld. He clearly knows how much we love the sight of the meat & bones pulled out of an electronic equipment.

@ZNotFound 2 года назад

Your electronics have meat and bones?

@ZNotFound 2 года назад

@Don't read profile photo Okay, we won't. Stop spamming.

@kwakdeducc 2 года назад

I cherish your words of wisdom

@ramijkhan2.089 2 года назад

@@ZNotFound you don't look like a dork who won't get a metaphor

@ramijkhan2.089 2 года назад

@@kwakdeducc 🤗

@ShahZahid 2 года назад

8:58 rubber may have infinite flex but the carbon bits on the rubber cause the contacts on the pcb to tarnish over a long period of time, and they need to be cleaned inorder to be functional again, but honestly that takes a decade or two to happen so no issue at all.

@ziko9519 2 года назад

I've used game controllers where the A B X Y rubbers breaks over time but maybe That's a quality control thing

@blahorgaslisk7763 2 года назад

@@ziko9519 Rubber is a very loose definition. There are thousands of materials that gets lumped together under the name "rubber" and some of them aren't even remotely related to actual rubber. So definitely a question of the material used for the rubber dome layer. Some age quickly some slowly. Some are prone to break down when they get in contact with the fat from your skin, others doesn't care. So probably more a question of the materials used rather than a QC problem.

@ziko9519 2 года назад

@@blahorgaslisk7763 true

@arandomfox999 2 года назад

The glued down battery is really the only majorly unfortunate aspect. However considering you might only want to replace it after it's truly dead it's not all bad, you won't feel too bad about forcing out the mostly dead battery. Still, I miss easily removable batteries being the standard.

@zackhopkins5185 10 месяцев назад

My deck says slow charging even with the original charger. You think it needs to be replaced?

@udayl9447 2 года назад

Wow... This is the first time I've ever seen Jerry holding back from going 100% in tear down .

@XDSDDLord 2 года назад

Very rarely is the teardown irreplaceable, lol. Also, other than the battery, fan, and audio boards, it's all mirrored.

@EV-olution 2 года назад

That is an impressive bit of hardware that seems very easy to fix, very cool. FYI, the skin you show at the end is quite epic! I have never been a "skin your hardware" kind of guy, but I would definitely use that skin if I had a Steam Deck, it really is awesome. I also appreciate the amount of editing that goes into making your various videos.

@RestoreTechnique 2 года назад

Very nice that the analog sticks are replaceable without soldering 👌

@mindimonson9307 2 года назад

Valve is an incredible company and has made a really great piece of hardware. I'm sure you don't know this but that magic trackpad is sensed using a Cirque capacitive touch chip, a Utah based company just down the road from you!

@duck_that_quacks 2 года назад

Clicked on this video faster than Zack can say "scratches at a level 6 with deeper grooves at a level 7"

@zenvio 2 года назад

first

@SixSilverStones 2 года назад

Wow Valve really considered repairability when designing the Steam Deck, which is awesome

@CollinTheBlind 2 года назад

Love seeing that they marked almost every board in a way to let you know where it belongs.

@pablofreitasmachado8076 2 года назад

Aside from the glued down battery..... this seems awesome. prime time for modders and repairers. I for one.... LOVE IT

@bishopworks3203 Год назад

Quick tip for all self-tapping screws for plastic - the best way to avoid cross threading is to very gently press down on the screw when inserting it and twist as if you were loosening it. Youll eventually feel a little 'click,' where you can then begin to screw down. This will always align you back to the start of the already existing threaded portion of the screw hole.

@mr.waffles8739 2 года назад

I really love that Steam kept true to the nature of PCs and made it relatively easy to replace things inside

@KittyPittyMeowmeow 6 месяцев назад

2:35 this technique for opening the back plate worked for me when no other one did. thanks a lot!

@KingLarbear 2 года назад

I never wanted to taste thermal pads until now. Watching you move them around was so satisfying

@tex9419 2 года назад

"these things might look like angel food cake, but i can assure you, these do NOT taste like angel food cake" - Zack 2022

@archie7288 2 года назад

4:16

@Zero-mr9hp 2 года назад

When you reinstall screws into plastic there's a technique: turn the screw backwards until you feel a little click then stop, that's the screw dropping into its original thread in the hole. Then when you screw it in you're not damaging the threads by cutting a new groove. As you thread the screw in, just turn it until it stops, do not "torque it" you'll just damage the threads.

@thinskin 2 года назад

Brilliant video as always Zack! My favourite game, since you asked, is SCS Software's Euro Truck Simulator 2. Despite truck driving being my real job, the game is incredibly relaxing and scenic, and it is also steam deck compatible. It also always goes down a lot in Steam sales!

@Mibris 2 года назад

There is something equally terrifying yet fascinating about these videos, just the imagination/fear that he keeps messing up really expensive devices, fighting against the unusual insight you gain from these type of video. It's also awesome how well he prepares for his videos, he knows where every screw is and recognizes all parts.

@Doumisco017 2 года назад

Valve definitely did something here. Great to see how repairable everything is! Gives the user hope that they are not gonna drop the steam deck like what happened with some of their other hardware attempts.

@deejeysam9747 2 года назад

@Don't read profile photo ok 🙄

@freevbucks8019 2 года назад

they also sell you replacement parts just in case

@NobleTiga 2 года назад

I'm watching you since five years I think and was never disappointed. Smart guy.

@Steakkiller 2 года назад

The SSD is a standard 2230 m.2 drive and available online. so with ifixit now selling replacement displays and especially the anti glare screen you could upgrade a cheaper Steam Deck to the top of the line 512gb version.

@thedarkknight1971 2 года назад

I love the addition of the 'Letting off it's own steam' pun. Re-introducing more puns into your durability tests & tear down videos would be fantastic fella! 👌👍 And yeah, batteries DO NOT need to be 'Welded' to the housing, just enough to hold it is ALL that's required. When will companies learn!!! 😎🇬🇧

@joshjlmgproductions3313 Год назад

My guess is Steam wanted to absolutely make sure nothing could damage the battery. So, they used an excessive amount of glue to keep it from detaching and bouncing around inside the frame.

@thedarkknight1971 Год назад

@@joshjlmgproductions3313 Yeah, but even so, with modern glues, you do not need much to get a firm grip, and with the light weight of these batteries, you certainly don't need to have so much sticky stuff that a battery could burst into flames trying to replace it. It's just yet again manufacturers tactics attempting to make sure that these devices are serviced (or just replaced outright) by 'Official' service centres... 😒

@ItsMadRiv 2 года назад

Playing on the only handheld that I ever bought. The psp 3000 while watching this video. The steam deck is just amazing

@sirkamote6774 2 года назад

Valve upped their game bigtime with this, hopefully we get more in the future with new tech with the same repairability.

@DoReid0 2 года назад

Watching this on my new Steam Deck! Love this thing and I've only had it for a few days.

@vtecspec2 2 года назад

Like your detail dismantle.

@ezenteno77 2 года назад

That skin is the best teardown so far, impressive work.

@souporwormgaming 2 года назад

My favorate game is Teardown. It's on Steam and rated 'Playable' on Deck. It is basically a destruction sandbox with some heisting elements.

@vibaj16 2 года назад

nice one

@joshjlmgproductions3313 Год назад

I call it a puzzle parkour game that's advertised as a destruction playground.

@madtoxicologist9717 Год назад

Great video!! Excited for my Teardown skin from Dbrand once my deck comes within 2 weeks!

@liborferencak8297 Год назад

Awesome video. I think you're doing great service to all viewers. At least I know what HW I planing to buy and what is inside without risking damage on my pricy device. And the dbrand tear down skin is must have on this device. I will definitly buy it.

@metafuel 2 года назад

Doubt we'll ever see these in South Africa but I'm very impressed with how clever and modular it's been built.

@joshuat.7350 Год назад

This gave me the confidence to order the $400 version and upgrade the ssd myself. Thanks man and those who support him!

@samanthamcnellis168 2 года назад

Jerry rig everything I love you videos you never see failed to impress me with all the technology that's inside of the devices that you tear down and stress test

@daver4905 2 года назад

You are the best !! I love how you show how Durable and how to take apart almost all electronics. Best video for me thanks. GOD bless 🙏🙏🙏

@CorvusCorax12d 2 года назад

To note for everyone worried about joystick drift. Valve has been working on this for a few years now and you can fix it via the valve software. Works on PC too by going into Big Picture mode.

@Nevir202 2 года назад

How can you fix a hardware issue with a software setting? I thought the drift was caused by the springs becoming too weak to hold the stick at zero. Are you saying it's sensor degredation causing it to lose its zero?

@PostalAngular 2 года назад

@@Nevir202 Stick drift is actually usually due to the potentiometers wearing out over time. So to fix it in software, you can set the deadzone to be larger or recalibrate it.

@CorvusCorax12d 2 года назад

@@Nevir202 You can set a deadzone with the software and it ignores the drift.

@xdeepspeedx 2 года назад

Thanks for the inside look! Very informative

@darylhayonx 2 года назад

Thanks for the teardown on the Steam Deck always helpful on a buying decision or maybe I win one. Can't wait for more videos like your electric Hummer project.

@stuff2watchnowmaybe 2 года назад

Really hope other companies follow the accessibility of the steam deck. At least in terms of them allowing you to get into the console

@Rhysee473 2 года назад

Keep up the good videos 💜

@Rhysee473 2 года назад

🌚

@casperlaugesen1506 2 года назад

Hey JerryRigEverything, Love your video’s, keep up the good work! I just ordered 1 of your awesome looking razor knives, can’t wait to get it😊 Love from Denmark👍😉

@TziMmys79 2 года назад

Great tear down as always!

@ThreeTwentyTech 2 года назад

I love how Zack does these durability tests so I don't have to.

@ThreeTwentyTech 2 года назад

@Don't read profile photo too late!

@iddra1868 2 года назад

Why would you ever do a durability test yourself??

@ThreeTwentyTech 2 года назад

@@iddra1868 to see how durable a device is and if i need a case for it or not

@iddra1868 2 года назад

@@ThreeTwentyTech You don't need a case if you plan on using it like a normal person, there you go.

@THYCR3AT0R 2 года назад

2:25 Im curious how many times you could insert and remove those screws to remove that backpanel for repairs before they won't hold, seems like something you should find out.

@blahorgaslisk7763 2 года назад

Depends on how you do it. If you just mash the screws in like it seems a lot of people does then they will soon be stripped out, so 2 to 4 times perhaps. But if you are a bit careful, starts by turning the screw counter clockwise until it falls down into the old thread then it would probably be good for 20 to 100 times. That also require that you don't use an electric screwdriver, doesn't torque the screws like a madman, don't press the screws down like a gorilla when unscrewing them and that you stop unscrewing the first time the screw jumps the threads. So the easy answer is that it will vary...

@809Gaming1 2 года назад

awesome video. nice details ...thank you for the good info as always

@trololo4217 2 года назад

i love how easy it is to disassemble and fix that thing no bullshit different size screws good job Valve!!!

@davidbronstein2040 2 года назад

Huge shame about how hard the battery is to remove. Almost undoes all of the great design work making this thing so repairable.

@realkrzaku Год назад

Seeing as the battery could possibly the most swapped component, I'd argue the "almost" part of your sentence.

@joshjlmgproductions3313 Год назад

I'd say the other aspects are still a plus. The joysticks, triggers, bumpers and fans are all very prone to failing (at least, in other devices).

@DUDA-__- 2 года назад

My favorite game was opening up the deck 3 times because the ssd screw was so fastened i stripped the philips head with a perfectly fitting fine screwdriver. Then i had to cut a slit into the screw. And when I was home again I changed ssds. The kioxia bg4 1TB works fine for me btw.

@Jezee213 2 года назад

Omg! best teardown skin ever!!! if I ever get a Steam Deck, I'm putting that on it for sure!

@vexx5955 2 года назад

Awesome build ! Full modular!! Congratulations Valve. Aphole, watch and learn

@nnicos 2 года назад

"This new teardown skin is the best we ever made" Dude, you say that every time And you are always right.

@joranvancoillie8133 2 года назад

Video starts at 1:55

@jacymark661 2 года назад

I just wanted to say that I really enjoy your content and have not once seen something that you have posted that wasn't interesting. Please keep up the excellent work and information that you share! I have a four year old daughter that is intrigued by how things work and I have been using some of your videos to help explain things.

@libraphyo8080 2 года назад

I love your enthusiasm!

@justinthematrix 2 года назад

Video starts at 1:50 thank me later

@Bathld 2 года назад

First

@david7598 2 года назад

True

@MiguelRPD 2 года назад

Congrats have a beer

@rhysswildlifeanimalsandmor9903 2 года назад

🥇👋🏻👍🏻🥂🫡🏆

@jeremiahsailo7532 2 года назад

Nahh

@James_____ 2 года назад

You deserve a cookie

@TheVishapakagh 2 года назад

So many channels do give or take the same things as you, but only you do it so calmly. Cant thank you enough for that. Cheers

@BigFoe 2 года назад

A lot of good tech packed into that!

@joanfarrerons7332 2 года назад

I'm very impressed the effort you put into yours videos.

@thewillsfamilyaccount6486 2 года назад

Such a cool D-brand skin!! Great video!

@mattb9664 2 года назад

9:57 That ribbon cable is Beautiful !!

@Dr4age 2 года назад

Awesome teardown skin!! love it

@joberttolop7155 2 года назад

Been waiting for this teardown

@liroso 2 года назад

Mesmerizing how your voice just grabs you and takes you along for the ride! Kudos to Steam for making their machine so repairable! Worth the wait.

@rcguygarage 2 года назад

This was a cool tear down👍💯👊

@simard87 2 года назад

Thanks for the great teardown, as always

@opnicompany 2 года назад

Awesome tear down!!!

@everettehungerford2858 2 года назад

Seems great! Good job breaking it down without destroying it.

@hex1c 2 года назад

Im stuck and in love with Cyberpunk 2077 at the moment. I was so hyped for its release and when i saw how broken it was i didnt touch it until about a week ago. Its 99% fixed i would say and i enjoy it very much! CDPRED should really get some good cred for sticking to it and delivering what was promised.

@savneetsinghrairai6823 2 года назад

Seeing this i remember PSP i dismantle some years ago ... amazing to see tech reached at this level.....all parts are modular just like psp makes replacement of parts eazy

@alemalvina7624 2 года назад

8:40 "Since the dawn Of time" ... Got me me memories of my NES buttons dying and a kid version of me scrapping off the rubber gunk to try to revive them. 🤣

@DualDriv3 2 года назад

Awesome love all your vids very interesting to see tech gets ripped apart and see what's inside :D

@jaredhuber7359 2 года назад

I'm probably never going to be in the market for a Steam Deck, not a gamer-on-the-go, BUT I did want to give you mad props for the skin. Nicely played sir.