*STEP BY STEP HOW TO* : K10 High Trail / K5 Blazer Pro Scale light kit install! 

Wow, I really appreciate the kind words! Just trying to be as helpful and straightforward as possible, so I'm glad people are finding it useful! 😁👌

Glad you found it helpful sir! 😎👊 Really appreciate the kind words! 😁

Thank you sir, very much appreciate the comment! 😁👌

Thank you Aaron, I really appreciate that! Trying to get back to cranking out more videos! It's just been a super busy summer! Haha. Thanks for watching! 😎🤘

Anytime Peter! 😎👊 Thank you for the kind words. I'm glad people are finding it helpful! 😁

Thank you sir, very much appreciated! 😎👊

@@WeissRC you're welcome my friend

Thank you sir! 😁😎👊

Thank you sir, very much appreciated!! 😁😎👌

Thank you Nick! 😁 Definitely liking it so far! 😎🤙

Thank you for the kind comment! 😁 Hope you have a wonderful day as well! 😄

Thank you sir, much appreciated! 😎👌 Hopefully this helps someone out. 👍👍

@@WeissRC for sure mate..keep going🏅

You're very welcome! 😁 Hopefully it was helpful! 👍👍

Great to hear sir! I think you will enjoy it. 😁 Thank you for the comment and I hope you found the video helpful! 😎🤘

@@WeissRC I just installed my k10 pro scale light kit up the same way you did using the maxx link cable and the jumper lead. Everythings works fine but I don't get turn signals or brake lights. Even in the app I can't get the brakes to work. running lights are fine. What do you think the problem is.

@nwirc this happened to me! In my case it was the main distribution block (block that attaches to the chassis). 👍

@@WeissRC I got my roll bar lights to work just like your headlights on the module and got my rock lights to work on the distribution block. The Mode button works as it should but the Signal button only works when I press and hold it and it only cycles through the modes of all the lights. I can't deactivate or reactivate the blinker mode. Was this the same case of your distribution block? Sorry brother but this is so aggravating lol.

Thanks Ryan, really appreciate it! 😎👊 Completely agree on the assessment of traxxas and their compatibility. 😜

Thank you Joel, very much appreciated! 😁😎👊

Awesome man, you're gonna love it!! 😎😁👌

@@WeissRC I bet I will, been watching videos about it, I'm fairly new to rc. I've got one other (SCX6) and I've enjoyed playing around with it.

@Minnesota cowboy up my friend has an SCX6 and loves it! 🤙 Repairs can be a little more expensive, due to the size of the vehicle.

@@WeissRC Yes they can, but come on.. 1/6 scale, go big or go home...lol

@Minnesota cowboy up hell yeah man! I have a 1/5 scale Kraton 8S, so I know what you mean. 😜😂

You're very welcome Jeff, glad I could help someone! Piecing together 2 Bronco kits works too! 😜

I too have the F-150, and I ran into a couple of issues. The Blazer kit is pretty much the same as the one for the F-150. Great video! It answered the questions I had. I do better with hands on than reading from a manual.

@stevenw1005 thank you Steven, I really appreciate that! I'm glad so many people are finding it helpful... that was the intent! 😁🤘

​@WeissRC so this will fit the F150 high trail also or do I need to buy it's own kit? Appreciate the help.

@@jasonhopper2223 I had to get a different mounting bracket so ended up piecing together a couple older sets but there should be a set for the Ford high trail f150.

Thanks man, really appreciate that!! 😎👊

If you live in Ohio, I'll pay ya to do mine lol

@@jaws_kgb9584 😂 I gladly would if I did! 🤣 I'm in NY. 😜

You are correct sir! 🫡 I found this out later when I converted the truck to brushless. 😜

Does everything else work? Also, when you hit the signal button twice what happens? I had a bad power distribution module and my LHS warrantied it. 👍

Did it worked finally?

@@user-yq5dm5gq2q like others stated, just hit the signal button 2 times quickly and it should fix that issue. I had the same thing happen, everything worked but the signals........

I rewatched and found that I missed the jumper in the f slot on the body

Roll bar is in port 1 and the rock lights are in 7 my friend. 😎👌

Thanks, and again great video.

@@hillsboromaddens anytime sir

I believe some of the aux slots have a special purpose. I'd have to double check the manual, but that's what I recall anyway. 👍

@@WeissRC yes but how to convert futaba connector to traxxas connector? I think that this connector made from traxxas

From what I understand you have to use the specific link cable in order for BT to work. 👍

You need to add the Bluetooth radiolink module to the radio for it to work. 👍

Very interesting! I will have to check my truck, but I believe my roll bar is plugged into slot 2 of the aux control block. I can verify later when I'm out of work to let you know for sure. 👍👍

@@WeissRC that would be awesome thank you! By control block, do you mean the module on the chassis? Not the one on the body?

@Jjsuhs7 no problem sir! I was referring to the module attached to the chassis itself, not the body. 🤙

​@Jjsuhs7 Sorry for the late reply! It's been a busy week! 😜 I checked last night and I have my roll bar lights plugged into slot 7 of the aux port. Again that is on the module attached to the chassis. 👍👍

I know I can get rool bar led housing part num trx9263... what about led light number to go with it please?

So here's my take... they *claim* that it is, but the fact of the matter is you'll have some kind of exposed pins somewhere (most likely in the aux connections). Granted it's not the "Pro scale" kit, but I have the standard light kit in my Bronco, which I have taken through creeks and whatnot... that module has absolutely gotten submerged and is very flaky today. Given those results, I would either err on the side of caution when running in higher water, or maybe even consider conformal coating. Regardless, whatever metal pins are exposed from the power module will eventually fall victim to corrosion if you run in water long enough... TL:DR, I'd avoid submerging the module as much as possible. The occasional splash here and there isn't going to hurt it. 👍👍

Did you buy the full kit? I believe I saw something like that and just skipped past it. 🤙

Very good question! There may not be a way to turn them on/off through the app at this time. Additionally, I believe some of the aux ports are intended for different features. I will have to read the manual again. 👍👍

As I recall, slot "K" of the distribution module on the truck body. 🤙

I have my roll bar lights plugged into port 1 of the aux ports. Hope that helps! 🤘

@@WeissRCI actually found the suggestion to use the M block. What I can’t figure out is what does the E green block blue wire go to or is it not used on this kit? 🤔

I'll have to go back and double check! 😂 Didn't think I missed anything but I certainly could have...haha. Glad you got everything working! 🫡

My apologies I don’t know how I missed it. I just rewatched it and sure enough it was there. Great tutorial. Thanks@@WeissRC

@markverbruggen3900 no worries sir! Glad you got everything sorted out!! 😎🤘

Good question! I don't believe so, at least not that I'm aware of.

@@WeissRC they say (traxxas) with the new update will fix that issue.

@@user-yq5dm5gq2q that would be nice!

TRA6525. 😎 Also, you can order the cable right from Amain! 🤘 www.amainhobbies.com/traxxas-communication-link-telemetry-expander-tra6525/p659996?gad_source=1&gclid=Cj0KCQjwpNuyBhCuARIsANJqL9P-8IBuu1ZZlDV17HK5aOEuFK8jTMnREIBUqmTLabRuqr0SkI3TlhcaAkOjEALw_wcB

No worries, certainly a fair question! You will need the max link cable if you want to pair up to the Bluetooth app... another discovery I made is that the Max link cable allows the transmission of motor data, specifically motor direction. When I went to a brushless setup, I originally didn't understand how my reverse lights were working. I would later discover it was due to the Max link cable. In short, I would use the Max link cable if at all possible! 🫡🤙

@WeissRC thanks a lot. I will be going that rout as I ordered the max link and phone controller mount as well.

​@@LookupJohn316​ sounds good sir! 😎 Best of luck and let me know if you need help!! 🤘

Absolutely. Slot 7 of the aux port. 👍👍 Hope that helps!! 😎👊

@@WeissRCthank you

@@thunderking68 anytime! 😎🤘

Did you hook up the leads to the motor, which go to the power distribution module? If so it's possible your distribution module (attached to chassis) is bad. That happened to mine as well!

Yes i hooked up them, because the reverse light working.@@WeissRC

@@user-yq5dm5gq2q Roger that. It may very well be your distribution module then.

@@WeissRC I had forgot to install the little jumber at the port E So now I have working brake lights but not turn signals. Hazards work well. Do you know if there something to set up from the menu off the application? Or fi you could upload a photo from yours the turn signals? Thanks for the help, appreciate.

@user-yq5dm5gq2q glad to hear you got part of it working! As for the turn signals, the only way I'm aware of to enable or disable them is by using the menu button on the distribution module. Mine was actually bad and I had to replace it. I'm not aware of a way to configure the turn signals through the app, if there is one.

Have you tried pressing and holding the mode button for several seconds? You can also press and release the mode button to cycle through the turn signal option. If that's not it, it's likely your main distribution module (which attaches to the chassis) that is malfunctioning. 👍

How did you hook up your roll bar to turn on and off with your headlights. I didn’t see that in the video

@babito1982 good point! I didn't focus too much on the roll bar since that wasn't the point of the video. That being said, there are 2 roll bars and you want to buy the one with the buckets that already have the LEDs installed. 👍 After that, it's simply a matter of drilling 4 holes in the dimpled areas of the body, running the wiring harness through one hole, and connecting it to one of the aux ports on the distribution module. 👌 I can even do a quick how to if you need help. 😁

I had this very same issue myself. The power distribution block (installed on the chassis) was bad. Fortunately for me, my LHS warrantied it immediately. I believe you may be able to warranty it through Traxxas as well. 👍👍 Best of luck, sir! 🫡

@@WeissRC traxxas chat fixed my problem. Turn signals were actually switched off, if you double click the signal button on the module it enables them. I also had an issue with no brake lights, that was my mistake plugging them into the wrong port

@FailedSquare glad to hear! I should have mentioned double clicking the menu button to enable them. In my case, that did not fix it and the module needed to be replaced. Anyway, glad you got yours working!! 🤘 Happy crawling, sir! 😎

Thanks for the comment! Unfortunately, I had to add the roll bar, as the truck did not come with it (like the F150). In the end, it costs you around an extra $50 bucks, but that's also why the K10 was cheaper to begin with. 👍👍

But that 1 light is consistently working? If so I'd have to say you have a bad bulb in the other side. 😞

@@WeissRC ok i got the brake light fixed it only comes on for the brake but the other brake light is still not working so get a new bulb for the brake light?

@@SouthernStandards it is sounding like that one bulb is bad, yep!

@@WeissRC ok thank you for telling me

@@WeissRC ok I got my light working but now my brake lights aren't working

😂😂😂😂😂 you're probably right Bobber!! 😜

It absolutely does! Thank you for your question. 😎👊