Тёмный

Stick Welding Tips 

Weld.com
Подписаться 1 млн
Просмотров 172 тыс.
50% 1

If you're new to stick welding, here are a few different ways you can avoid sticking your electrode
Download the WELD™ APP, join the welding community, find welding resources, check out our member discounts through our brand partners and links to our podcast and social channels here: linktr.ee/WeldDotCom
Disclaimer: As an Affiliate and Industry Influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Опубликовано:

 

13 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 400   
@GAIS414
@GAIS414 3 года назад
"when metal heats up, it contracts. And when it cools down, it gets colder." At least half of that statement was right.
@ZEUS-eg8jw
@ZEUS-eg8jw 3 года назад
Think they are both good ...
@danielborgstrom4392
@danielborgstrom4392 3 года назад
@@ZEUS-eg8jw Pretty sure darn metal EXPANDS when it gets hot....
@stickweldingro2054
@stickweldingro2054 3 года назад
@@danielborgstrom4392 noooo, for sure it "contract " and make bbs 😂
@melgross
@melgross 3 года назад
That’s definitely screwy. He knows better, but I think he’s still nervous at times.
@ZEUS-eg8jw
@ZEUS-eg8jw 3 года назад
@@danielborgstrom4392 You're right, I didn't translate it correctly ... Thanks!
@troydunn6005
@troydunn6005 3 года назад
Thanks, Mancub. I struck my first arc today. 6013 on some old rebar lying around. Amps were too low, I was striking too hard and going in too fast. You got me going. Great tips.
@POOKIE5592
@POOKIE5592 3 года назад
When the metal cools down, it gets colder. Got it. Glad I watched this science lesson.
@WTFisAuserFRCKINname
@WTFisAuserFRCKINname 3 года назад
I see you’re very versed in the novice ways
@houtexflex
@houtexflex 3 года назад
He’s not wrong
@shoa2285
@shoa2285 3 года назад
"When metal heats up it contracts" . Holy hell! Where did they find this guy.
@funonoldwheels7150
@funonoldwheels7150 2 года назад
He mis-spoke. Well spotted. The video made me feel smarter, then your comment made me stupider. Net Zero gain for me, I guess.
@DixieWrekt04
@DixieWrekt04 2 года назад
Wow someone visibly nervous in front of the camera misspoke? Who would've thought. You know what he meant lol
@marcoantoniomejiamedina8539
@marcoantoniomejiamedina8539 3 года назад
You have given me so far the BEST ADVICE of the many other videos I’ve seen! Hands down the best advice!!! Thank you so much for helping us. Keep up the great work!
@JeffEdlund
@JeffEdlund 3 года назад
Great video for first time DIY welders like me. Makes total sense to grind the rod a little, and practice (and practice) before it's HOT. Thanks for the tips!!
@lakeschoolrestorationchann1567
@lakeschoolrestorationchann1567 3 года назад
Every time I chuck a rod in the holder I spin the rod while squeezing the jaws shut. It wears a bit of coating off the exposed rod end and cleans the jaws a bit. It seems to help on starts. Also, stick welders with high open circuit voltages make it easier to start without sticking because the arc will start and stay lit with a longer arc gap.
@Ritalie
@Ritalie 2 года назад
I have a cheap $99 "Hone" MMA140 stick welder, with an inverter and a "Hot start" feature built in. When the rod touches the metal it basically explodes to life in a huge fireball. You just "barely" have to nick the metal and the rod starts. On another much more expensive inverter welder I have, it's almost impossible to start the arc.
@twothreebravo
@twothreebravo 3 года назад
Great info for us who've never welded before. You're probably surprised to find that we watch the channel too, it's a skill I hope to pick up some day.
@GeoffPesos
@GeoffPesos 3 года назад
When he said bob watching from the sky I'm pretty sure that's just mancub speak for Bob has the eye of an eagle and is always watching.
@AaronsRandomLife
@AaronsRandomLife 3 года назад
Yeah like, this really freaks me out. Is Bob okay??
@bobmoffatt4133
@bobmoffatt4133 3 года назад
@@AaronsRandomLife As far as I know. I'm getting fired up
@tubeonline629
@tubeonline629 3 года назад
@@bobmoffatt4133 You need to tell Man Cub to not be putting you in the sky just yet. " That boy ain't right".
@charlesyoung8600
@charlesyoung8600 3 года назад
@@bobmoffatt4133 great! was thinking the worst there for a second.
@Enonymouse_
@Enonymouse_ 3 года назад
@@charlesyoung8600 Bob is getting ready to do some new stuff according to what i've heard.
@ABlastersLife
@ABlastersLife 3 года назад
You’ve become so comfortable in front of the camera ManCub! You’ve been killin it. Kudos to you
@diogoribeiro9853
@diogoribeiro9853 2 года назад
I went to a welding class today and some of my welds were pretty good for the first time but all the time I sticked the rod, thanks for the tips
@richardhowe6218
@richardhowe6218 3 года назад
When I was learning, I never had my amps up high enough. On 7018, I was told to turn up your amps until you can hold a tight arc. Then hold a tight arc.
@bingo_welding7677
@bingo_welding7677 3 года назад
I'm pretty sure Bob came to a local bowling alley and hustled the local guys out of a bunch of money. He bowled three 900 games with his left hand. Legend!
@bobmoffatt4133
@bobmoffatt4133 3 года назад
I'll have what you're having... 900 games huh?
@bingo_welding7677
@bingo_welding7677 3 года назад
@@bobmoffatt4133 hey it's just what I heard . I though a perfect game was 300 but no, the town keeps saying 900 with his left hand .
@melgross
@melgross 3 года назад
Bob can weld the joint with his eyes closed and both hands tied behind his back.
@Parents_of_Twins
@Parents_of_Twins 2 года назад
@@bingo_welding7677 A perfect game is 300 so you are correct with what you thought. Legends create legends. Hell take 5 minutes and look at all the legends surrounding Bruce Lee. Some of the things he was supposed to have done are not humanly possible.
@gailjones9155
@gailjones9155 3 года назад
Bad Boy Bob, Your boy scared us on that one ! The welding world would suffer with out you partner, you're the best.
@sethmorris8126
@sethmorris8126 2 года назад
"if you ever strook a match on a on a book, on a book, like, not on a book but like a like it smatches". I will never forget that, thankyou
@rob-artfarmingnz6138
@rob-artfarmingnz6138 Год назад
🤣😅
@awonderfulfeeling8588
@awonderfulfeeling8588 2 года назад
Back when I was in Architecture school, we had to present our work at the end of every other week. It was so awkward when you had nothing to show for, yet you still had to get up and talk in front of the entire class and try to sell the bs you had. It was horrible every single time. Even when you had some good work, sitting there waiting to take your turn to get up there and talk was the most painful part of the entire program. Public speaking even in front of a camera when you KNOW plenty of people are going to watch it can be beyond nerve racking. But this dude got this shit down pat. If I could even put a sentence together as well as him for any of my projects it would've made my college career so much less painful lol. I appreciate this man, good man, good dude 🙏💪
@syzygy1185
@syzygy1185 3 года назад
Here's a fun drinking game: Take a shot every time you hear Mancub say "Alright"...
@markzuckerberg4462
@markzuckerberg4462 2 года назад
he said that I was reading this
@phiksit
@phiksit 2 года назад
This was hard to watch. Shouldn't take five minutes to say make sure your connections are tight. And you can usually break the excess flux off the rod tip with just your gloved fingers.
@austinanson8357
@austinanson8357 3 года назад
When I started learning, I was always told to take a deep breath and on the exhale strike my arc. Keep a file beside you, insure the end of the rod is bright clean metal.
@eliotspencer9212
@eliotspencer9212 Год назад
Fantastic advice, cheers bud
@juanfpulgarinospina8588
@juanfpulgarinospina8588 2 года назад
Thanks a lot. Awesome.thanks. After I saw your video I tried and the welding got very good. Thanks for the help. God bless you and your family. Happy holidays
@duncanmarks1590
@duncanmarks1590 9 месяцев назад
Hi, really good introduction to stick welding, I have done "formal" class room training for welding where the focus in on the four basics; amps, rod gap, rod angle, and travel speed. But this presumes that everything else in the welding situation is set up properly i.e. as you said; connections, earth clamp condition, connection to job, and surface condition of job. very good. thank you
@markkratzer2540
@markkratzer2540 2 года назад
Hey, I'm just learning how to weld and it sounded like you know your stuff. I'll give it a try and appreciate the advice. I'm a long time RU-vid user and have more than 25 years experience as a copywriter writing ads and marketing materials for large and small companies.. The best advice I ever got was from the best teacher and professor I ever had at the University of Florida. "Cut, cut, cut, and then cut some more. Edit everything that doesn't move your story." The same advice works for public speaking and RU-vid videos. You're making them to help people and promote your business. That's smart. Just tweak your vids by taking time to cut them down. I guarantee you'll get more subscribers and more business because people will appreciate the content and professionalism. Take your time and relax. One and done is never the end. It's where you begin. Hope this helps.
@EnduranceChannel
@EnduranceChannel 3 года назад
To clean the tip of the rod spin it in the screw head of your plastic cover on your stinger. Don’t have to find a file and the Phillips head cleans it well.
@memecentral2460
@memecentral2460 3 года назад
Wdym bob is watching from the sky
@bobmoffatt4133
@bobmoffatt4133 3 года назад
Watching from my recliner.
@basiliohernandez5111
@basiliohernandez5111 3 года назад
This came up in a comment a few videos ago. Hope all is well Bob!
@ebinmaine
@ebinmaine 3 года назад
@@bobmoffatt4133 good to see you're still kickin Bob! I've been teaching myself how to weld using an old Lincoln buzz box AC 225 over the last couple years. Learned quite a lot watching your videos and those of others. Thank you for taking the time. Eric.
@sidewaysdanny
@sidewaysdanny 3 года назад
@@bobmoffatt4133 you taught him well though Bob, don't tack to a nice table
@jwdickinson643
@jwdickinson643 3 года назад
@@bobmoffatt4133 Thank Gawd! Mancub’s comment scared the livin’ daylight outta me! Glad you are well! PS....you still owe me a phone call! 😁😁😁😁😁 (the guy in Georgia you called ‘bout a year ago when I was dining with my grandkids....the geodesic fire pit designs)
@jamessonger3
@jamessonger3 3 года назад
Keep up the good work bro! Love the videos!
@bruinflight1
@bruinflight1 3 года назад
Thanks Mike! Very helpful tips!
@brentweiser3596
@brentweiser3596 3 года назад
Been a while since I've used my powerarc stick welder. This brings back some old memories.
@usernamemykel
@usernamemykel 2 года назад
What was her name?
@mattgaming8717
@mattgaming8717 3 года назад
Strike the stick like a match also. You can keep the arc alive ounce its lit to the area of welding/start. Your ground connection is important from ground to rod. Tap your rod tip in the middle of welding (start\stops) to clear the slag on rods before striking. Turn your heat/amps up a little if its stick too much. Practice practice. Ease your breathing. I learned a lot from this channel. Every machines different too. So get to practice your settings. Old wet rods will be a big issue. Keep the dry.
@usernamemykel
@usernamemykel 2 года назад
My old rod is limp but dry.
@eugenehvorostyanov2409
@eugenehvorostyanov2409 Год назад
Thank you for a lesson! Nice to watch and learn from. ❤️👍
@davew3348
@davew3348 3 года назад
Great video keep up the good work Mancub
@juanpulgarinospina9996
@juanpulgarinospina9996 2 года назад
Awesome thanks for sharing your experience. Happy holidays
@MH-qq3kj
@MH-qq3kj 3 года назад
Nice job. Learned good tips
@jordanmontez3213
@jordanmontez3213 3 года назад
Shooot y’all learned fancy. I started shorty ago and I had to learn on my own. No hot start on an old Miller thunder bolt 225 with the crank on top to change the amps.
@usernamemykel
@usernamemykel 2 года назад
When you started shorty, what did she say?
@veniceitalyvlog
@veniceitalyvlog Год назад
You explained well. Great job.
@TeamJelen
@TeamJelen 3 года назад
Total noob here. I've not welded before, just waiting on some supplies to turn up. Can someone clear up something for me? You start the arc by touching the work piece, but once you are going, if your rod touches the work piece, it will stick? Is that right? Touch to get started, but then don't touch?
@firstmkb
@firstmkb 3 года назад
Once it starts, the tip of your rod melts and there is a molten puddle on your material so it doesn't stick. I'm a noob too, but have been trying off and on with an old crank stick welder. I stick the end much more than I get a good start, and am going to try these tips.
@leonardpearlman4017
@leonardpearlman4017 2 года назад
Actually there are some electrodes that can touch the work in action, people say "Drag Electrodes" sometimes. Anyway, you start the arc by BARELY touching the work! In that moment when everything is cold, you have a chance to weld the rod to the work! Then it's a short-circuit, you don't get an arc but everything gets hot and it's a mess. If you can strike an arc things start melting and life is easier after about a second. In action there's a right arc length which is really short and might be almost zero. When I use 7014 electrodes and my shaky hands, I'm definitely touching the work, tapping my way along like a blind guy with a cane!
@myopicthunder
@myopicthunder Год назад
I just started welding yesterday, I got a lot of sticks at one point had to turn off the machine but found the easiest way is to lightly scratch along the work with the electrode also allows you to see through shield for an instant before you start welding instead of trying to play peekaboo with it. The gate post I repaired wasn't pretty but it works.
@patrickeidhammer2470
@patrickeidhammer2470 Год назад
@@leonardpearlman4017 bro! Blind guy with a cane is the best fucking description ever!!! I'm literally lmfao right now because that IS SO ME AS WELL! I've been welding awhile like a few years but only MIG-FLUXCORE I just got given a free little 130ampTig/90ampARC machine and IF... and that a big IF i get a good strike I am totally shaking and tapping my way along the joint just like you said 🤣🤣
@mikebazil1
@mikebazil1 3 года назад
Great video, thanks mate
@ricardodafonseca9043
@ricardodafonseca9043 3 года назад
thanks for the tips
@fatboyshadetree5139
@fatboyshadetree5139 2 года назад
I am having the same issue you had at the very end of the video. I am using 1/16 rod on some exhaust bolt heads. Any advice? Its a 110V(?120V?) Generic stick welder. I dont have a 220V outlet. Also should i change to a different rod?
@notajp
@notajp 3 года назад
I always turn on HF start on my old Linde machine when using 7018. Really helps stop sticking the rod on arc strikes. Haven’t run 7018 on my Powcon yet, but when I do, I’ll try turning on hot start. On re-strikes, I just run an old file across the end of the rod a swipe or two.
@twistedtree4328
@twistedtree4328 3 года назад
Unless your machine is different than mine, it can be very dangerous to use HF start with rods. It can create an arc where it’s not supposed to (your body). Your manual should make it very clear on why it’s not a good idea
@Laura-wc5xt
@Laura-wc5xt 3 года назад
We like the Grench that stole Christmas Gloves and the Tree....Outstanding....
@Ritalie
@Ritalie 2 года назад
I have a cheap $99 "Hone" MMA140 stick welder, with an inverter and a "Hot start" feature built in. When the rod touches the metal it basically explodes to life in a huge fireball. You just "barely" have to nick the metal and the rod starts. On another much more expensive inverter welder I have, it's almost impossible to start the arc. It seems painful to use a welder without "Hot start."
@giorgos424
@giorgos424 3 года назад
3:05 ..."Bob is watching from the sky"??? What happened to Bob??
@coasmechteranic
@coasmechteranic 3 года назад
Yeah. That was my reaction. What did I miss???
@cop-killer-
@cop-killer- 3 года назад
He's gone man...
@FollowerofYahuwah
@FollowerofYahuwah 3 года назад
I've asked this several times with ZERO response. I don't like that they won't address this!
@riggsandmurtaugh7938
@riggsandmurtaugh7938 3 года назад
He is missed
@iamclickb4it
@iamclickb4it 3 года назад
He's not dead
@MR-yp7mu
@MR-yp7mu 3 года назад
“Stick around “😁
@Zealdave2223
@Zealdave2223 3 года назад
(1:13) When the metal cools down it gets cold? lol That sounds like something I would say lol
@usernamemykel
@usernamemykel 2 года назад
Then you're both geniuses...
@victoryoung9178
@victoryoung9178 2 года назад
Awesome, very helpful
@tonygonzalez5579
@tonygonzalez5579 2 года назад
I just started my welding journey 2 days ago. I'm still stuck on striking an arc.
@roknrolla1329
@roknrolla1329 2 года назад
You're awesome dude. Blessings.
@urbanoutdoorsmans9306
@urbanoutdoorsmans9306 3 года назад
7018 verticle root fill hot pass and cap please
@paulbisceglia6824
@paulbisceglia6824 3 года назад
Very information. Do you like the esabs better than the everlast? I am thinking of buying the multi process 275
@paulbisceglia6824
@paulbisceglia6824 3 года назад
@Wroger Wroger everlast is in san Francisco and I live in Massachusetts. That's not going to work
@paulbisceglia6824
@paulbisceglia6824 3 года назад
@Wroger Wroger Grow brain? Awfull ballsy behind a keyboard
@ukghconst
@ukghconst 3 года назад
Years ago like 50, the rods then didn't seem to burn the metal leave like a shield of hard flux over the rod. Then rid were are made with low hydrogen, this that cause them to create this shield. High carbon rods they make a bigger and harder shield to be broken off. That what I found, several other welders came to the same conclusion.
@9up9up9up
@9up9up9up 2 года назад
A new rod is always easy to start an arc.... at least to my experience, I was hoping to see him to use the used rod to start an arc after increasing the amperage.
@bayleybinks5545
@bayleybinks5545 2 года назад
hi, I am making a welding table at home a, I have 6mm galvanized sheet of metal for the top of the table. will I be able to clamp the earth to the table top and have a sufficient current to start welding or will i have to wire wheel the gal off the table top to get a sufficient current to weld without a problem? thank you to who ever answers
@hotlinedubai1235
@hotlinedubai1235 2 года назад
Stay away from galvanized sheet it’s very toxic when it’s get heated
@johnsutter1497
@johnsutter1497 3 года назад
What import acdc tig welder do you think welds thin metal best? Thank you have a Merry Christmas
@drumtwo4seven
@drumtwo4seven 3 года назад
Everlast
@MaineHomeShop
@MaineHomeShop 3 года назад
Best answer here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Txa8XHq3N-8.html
@katie8877
@katie8877 2 года назад
I keep getting the rod stuck on the metal when I’m trying to work but it’s also my first time but it’s so stressful
@soundman6645
@soundman6645 2 года назад
ya gota remember that most beginners and amateurs will be starting out with old iron core machines with one adjustment. the other thing to remember is that all the older and cheaper machines under read on current
@reaper060670
@reaper060670 Год назад
So I know nothing either. I turned on my machine last weekend and it wasn't sticking, the rods I mean. It's only a small amp machine. 10-80A is it's level but I bought a 160A machine that lets me use Lift Tig. I had to buy a Tig torch but I need to learn about the Tig machine with the Stick too. The 160A machine is one of these cheap Dekopro 2 in 1 machines. It only cost me 65 Euros on Amazon but I didn't understand the 1-10 numbers until u explained it right there. Nice one for that bro.. I had my welder at 2 so that means 20% extra on top of my Amps? That's brillaint bcos I didn't understand that. The manual doesn't explain this in it. Thanks for showing me that bro.. I don't wanna throw a loada money away on a serious welder atm until I can find a school to get into for a year or so. Some great advice on here man. Thanks for this awesome video. Do u smoke bro? LMAO I'm only buzzing off ya man.. I love me some good green but not while I'm welding now..LOL
@jeanpierredaviau7478
@jeanpierredaviau7478 3 года назад
What are those glasses you wear and keep on under your helmet?
@indigochild161
@indigochild161 2 года назад
Thank you!
@inmyshedwithbc.
@inmyshedwithbc. 3 года назад
Shd 2 specs under an auto helmet?
@First.nameLastname
@First.nameLastname 3 года назад
He's better at welding than grammar.
@usernamemykel
@usernamemykel 2 года назад
Yes, he killed his grammar!!!!!!!!!!!!!!!!!!!
@jsly5473
@jsly5473 3 года назад
When I get one where my flux broke off the rod, I usually drag the bare end under the fab table (¼" carbon sheet top), and flick the rod when I pull out of the arc. When finishing a run, and you pull out of your puddle, you can flick the rod and that usually removes that slag from the tip of the rod. After which, you can peel the overlapped flux from the recession of the electrode with your glove to expose the metal, often like a brand new rod on the end.
@chrisjones6002
@chrisjones6002 3 года назад
Quick question if you don't mind. I picked up some rods with a package deal of welding supplies. Some have flux missing from them. Is there any point in trying to use them for practice or should I toss them? Thanks.
@chrisjones6002
@chrisjones6002 3 года назад
I wasn't too clear. There are pieces of flux missing from the rods not all of it. So one might be missing some flux from a half inch to an inch section.
@Laura-wc5xt
@Laura-wc5xt 3 года назад
@@chrisjones6002 burn them for practice...then get some fresh rods and feel the difference.....high cellulose rods tend to flake a lot...6010 and 6011
@chrisjones6002
@chrisjones6002 3 года назад
@@Laura-wc5xt thanks, will do. They are a mix of 6013 and 6011. I'll burn them up practicing and switch to new for anything else. I found a good deal on new 6011 so I stocked up.
@Laura-wc5xt
@Laura-wc5xt 3 года назад
@@chrisjones6002 fantastic
@HappyHands.
@HappyHands. 2 года назад
need some imput: im teaching myself to weld. and i got one of those affordable crappy Amazon welders which the amp Meter is way off. i had to crank it to "140" to weld 3/32 6013 but im getting the hang of it. Today i tried 1/16 6013 and dialed it in to 75 assuming the meter is still off , I immediately stuck and smoked two rods. One rod literally catching on fire in an instant. warped them terribly trying to twist them off. So i had to start low and work my way up. However, here's my question: Can i still use those two heat warped rods Or are they literal toast now?
@sr8shoota
@sr8shoota 3 года назад
what kind of clamps are those used on the table? how do they hang on to the table?
@firstmkb
@firstmkb 3 года назад
I call those bench dogs (from woodworking), but it may be different for welding. The "nose" of the clamp hits your work before the shaft of the clamp has bottomed out, causing it to cock at an angle and get stuck. To release, smack the nose parallel to the table, towards the shaft and it will release. Utterly simple and fairly effective. You can make them yourself, if you have something that makes a close in the hole.
@2024SLCLUBBERS
@2024SLCLUBBERS 3 года назад
Watched 1000 Hours of Your Videos & Applied For a Welding Job with 1000 hours & fired Same day
@usernamemykel
@usernamemykel 2 года назад
Because you depended on the tutelage of this idiot???????????????????
@2024SLCLUBBERS
@2024SLCLUBBERS 2 года назад
@@usernamemykel just a joke
@joerodriguez1018
@joerodriguez1018 Год назад
Great tips
@mcroteau91
@mcroteau91 2 года назад
the amps go up when you long arc?
@job38four10
@job38four10 3 года назад
I'd like to have a nickel for everytime this guy says "alright"..............
@andyb7754
@andyb7754 3 года назад
It's like hundreds, alright!!!!! Bring Bob back. At least BoyCub is better then Mr Tig!
@WTFisAuserFRCKINname
@WTFisAuserFRCKINname 3 года назад
Go watch any welding video on any other channel and they always say “alright”. Once you notice it, you won’t unhear it.
@karyabaruteknik2022
@karyabaruteknik2022 Год назад
terima kasih, mantap.. thanks for yours video..👋
@DonHavjuan
@DonHavjuan 3 года назад
Nice one Mike
@bastosreviewer5192
@bastosreviewer5192 3 года назад
Wow, I always got frustrated when my leads got disconnected! I totally forgot the leads will expand and contract.
@cdrive5757
@cdrive5757 3 года назад
I'm sorry young man but increasing the length of an arc by increasing the distance from the base metal to the electrode (Long Arcing) does not increase (Amps) current. It increases the resistance of the ionized gap. Within limits, Increasing resistance will increase heat. P = ( Isq x R). P = Power in Watts.
@wargamingsupernoob
@wargamingsupernoob 3 года назад
7018 vertical stringers please
@damiencrowley9299
@damiencrowley9299 3 года назад
What happened to Bob
@iamclickb4it
@iamclickb4it 3 года назад
He's still kicking have no fear
@Enonymouse_
@Enonymouse_ 3 года назад
restarts are a pita! Filing the rod end is a good idea.
@calebsherman9255
@calebsherman9255 3 года назад
I like to bust off the flux booger with my fingers, if that don't work, grab a new rod. 😂
@chaseclark4749
@chaseclark4749 3 года назад
Haha perfect title 😂😂
@Wootangtw
@Wootangtw 3 года назад
Thanks buddy....
@kitty9374
@kitty9374 3 года назад
Mancub is my favorite guy on here ☺️
@RickBaconsAdventures
@RickBaconsAdventures 7 месяцев назад
I never heard them called "tips" we always called them "electrodes" thank for video, come to brazil
@rexluna4533
@rexluna4533 2 года назад
Thanks man
@DiegoSynth
@DiegoSynth 2 года назад
Thanks for the tips!! Please be careful with the grinder: 8:55 (specially wearing gloves!)
@evanreed2294
@evanreed2294 2 года назад
Hes a man...cub
@stickweldingro2054
@stickweldingro2054 3 года назад
Nice video, but when you start welding ?
@baldwindigital
@baldwindigital 3 года назад
Bob is watching! Every time I start whacking at a chunk of slag I think that...😂
@Dman9875
@Dman9875 3 года назад
A good tip for stick welding to help start the weld is to just barely chip off done flux at the tip to get the wire to touch 👍🏽
@usernamemykel
@usernamemykel 2 года назад
"...done flux..." What?????
@Dman9875
@Dman9875 2 года назад
@@usernamemykel ahh typo. Just chip a bit of flux off of the end of the rod. It’ll help start the arc easier
@fabianmoya9896
@fabianmoya9896 3 года назад
I'm still trying to decide if I'm buying a esab multi welder or everlast!!!???😉I see yall are stacked with Esab!!
@firstmkb
@firstmkb 3 года назад
What did you end up getting?
@paulenespika9119
@paulenespika9119 3 года назад
When you long arc, the VOLTAGE increases, the current DECREASES.
@antilogism
@antilogism 3 года назад
I think he meant to say "power". Yes current decreases but just slightly since it has a constant-current inclination. That means a long arc adds more power (heating). Different machines have their own characteristic drooping curve.
@YounisKhan-nk8nh
@YounisKhan-nk8nh 3 года назад
Thanks bro
@nde-mt2yc
@nde-mt2yc 3 года назад
C'MON, Wheres Red Beard...
@Laura-wc5xt
@Laura-wc5xt 3 года назад
at Thee Doll House
@nde-mt2yc
@nde-mt2yc 3 года назад
@@Laura-wc5xt Ha, Probably so...
@paulhatch7759
@paulhatch7759 3 года назад
Could you explain why arc strikes are so bad from a functional perspective? Thx
@jg8060
@jg8060 3 года назад
It can change the grain structure of the work, which can cause it to become brittle.
@BC-hr2of
@BC-hr2of 3 года назад
@@jg8060 ... 🥸👍🏽.... especially tough at seismic connections 😎
@Laura-wc5xt
@Laura-wc5xt 3 года назад
and causes a stress riser which can lead to fracture
@bottmar1
@bottmar1 3 года назад
Stay away from 7018 rods unless you have a d.c. welder. A.C. welder causes lots of sticking with that rod. I don't use 6011 and 6013. Too damn much sticking because the flux is broken back after using part of the rod due to very fragile flux. Starting a new 6011/13 rod sticks because the wire protrudes slightly past the flux. I use only 7014 rods, period. They somewhat stick new because the wire protrudes past the flux too but arc easier anyway. Once used, they strike an arc easily as the flux is more durable and does not break back, exposing bare wire. I see a lot of welding shops using 6011 and 6013 rods. I don't know what in the hell they are thinking of. They must be too lazy to clean the surface needing welding and too lazy to turn the heat up a little higher for 7014 penetration.
@massimo79mmm
@massimo79mmm 3 года назад
Bob is watching from the sky?????
@alexxxxx12341
@alexxxxx12341 3 года назад
Im glad im not the only one that picked up on that
@victordavila9924
@victordavila9924 3 года назад
Need answers for this too
@chrischamberlain4583
@chrischamberlain4583 3 года назад
What happen to bob ????? I just pick that up to
@johndeninger8905
@johndeninger8905 3 года назад
What happened to Bob moffit
@bainheffner7385
@bainheffner7385 3 года назад
???
@aerialrescuesolutions3277
@aerialrescuesolutions3277 3 года назад
Mike, set an example, use the fume extractor... Please. Great job for beginners
@TheArdavan
@TheArdavan 2 года назад
thanx
@jackguess762
@jackguess762 Год назад
5:10 85 plus 21 is 106 but good video it helped i started welding today
@dcb1138
@dcb1138 3 года назад
6:50 "stroock a match"..... well.... That's a creative word.
@petemoss9693
@petemoss9693 3 года назад
Nice video ( all right ) good tips ( all right ) keep the rod tip ( all right ) just close enough ( all right ) to the work surface ( all right ) over all this video is . . . all right .
@allensnook7760
@allensnook7760 3 года назад
Hey mancub tell him if he does get stuck and it quits on him if he cant break free just sgueeze the handle and remove the stinger from rod before it turns into hot rod.!!!then remove it from work and start over.i remember when i first began and panicked when i got gap to long attempted to restart only to freeze stick into work and rod got cherry red!!!till i relized current still active n burned my hand attempting to break it free.!!oh yes the beginner blues!!snookie pa.my dad was certified welder but taught me nothing,didnt want me in his footsteps!!!i just wanted to fix my own shit,so self taught myself!!you do good with us beginners!!!
@usernamemykel
@usernamemykel 2 года назад
"Dad" didn't want you to earn a measly $40K/year - he wanted something better for you - kudos to "dad"!
@skimark8275
@skimark8275 3 года назад
Great movie, helped me a lot with my Everlast settings for stick, just need to figure out Arc Force. Thanks
@melgross
@melgross 3 года назад
Another Everlast troll.
@skimark8275
@skimark8275 3 года назад
@@melgross Really ?????
@phiksit
@phiksit 2 года назад
Yes really. Tired of seeing you Everlast "people" in the welding video comments section.
@skimark8275
@skimark8275 2 года назад
@@phiksit OK Then don't look pinwheel people
@frankthespank
@frankthespank 2 года назад
I just tried to weld using a cheap stick welder for the first time a few minutes ago. Didn’t go as planned…. LOL Is it normal for when the rod sticks to the metal and you don’t un-stick it right away for the rod to start to glow red hot and completely scorch all the flux on it black and to stink up your whole garage? ‘Cause that’s all I managed to do, I couldn’t get an arc… just a few pops and sparks and getting the rod stuck to the metal. That’s why I’m back here watching RU-vid videos…. 😆
@ryansilva8007
@ryansilva8007 2 года назад
Good video, the guy gets excited when he’s talking and I understand lol. So some of what he’s saying you’ve gotta forgive him. Some people are great at explaining things, others are good at understanding things and kinda not the best at explaining. I feel you man cub. If I was with you we’d be two jumpy ass dudes trying to explain shit 😆.
@memecentral2460
@memecentral2460 3 года назад
When something gets heated it expands
@usernamemykel
@usernamemykel 2 года назад
Presenter never attended a physics class?
@perentee77
@perentee77 2 года назад
Alright, alright, alright, alright. Did me head in..
Далее
Stick Welding 101 (SMAW) - Tulsa Welding School
59:07
Просмотров 416 тыс.
skibidi toilet 76 (part 2)
04:28
Просмотров 14 млн
Qalpoq - Kichkina tabib (hajviy ko'rsatuv)
30:41
Просмотров 173 тыс.
Do this instead (3 Stick Welding Tips)
13:33
Просмотров 376 тыс.
STICK WELDING for Beginners | SMAW 6010 & 7018
21:19
Просмотров 842 тыс.
Start Your Welding Business With These Tools!
16:27
Просмотров 653 тыс.
How to Weld 7018 welding rod tips and tricks.
15:47
Просмотров 88 тыс.
How NOT TO Weld: Most Common MIG Welding Mistakes
16:44
Stick Welding Basics for Beginners: How to Stick Weld
24:09
Stick Welding Basics: How to Have Great Technique
8:31
Watch This Before You Start Stick Welding.
13:56
Просмотров 298 тыс.
Learn Stick Welding Setup Basics
17:00
Просмотров 193 тыс.
Lessons from My First Welding Job
18:25
Просмотров 873 тыс.