Тёмный

Sticking The ENGINE Back In My CHEAP Corvette *Easier Than I Expected* 

WatchJRGo
Подписаться 406 тыс.
Просмотров 74 тыс.
50% 1

It's time to stick the drivetrain back into my $3,500 Chevy Corvette. We dropped the entire drivetrain out to make the engine swap easier, and it was the right move. The LS1 came right out and the LS6 dropped right back into the cradle. We spent a bit of time cleaning everything up and dressing the new engine, now it's ready to go back in. So today we're going to roll it back into place, drop the car back onto the drivetrain, then start putting everything back together. Hopefully we're starting this thing up for the first time in short order!
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make RU-vid videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CheapCar #Corvette #C5Corvette

Авто/Мото

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 221   
@WatchJRGo
@WatchJRGo 2 года назад
Yes it's been a long time since I dropped a video on this channel. It started with fighting the weather, then Jared got married on Saturday. Tell him congrats in his comment below ⬇
@robertobuenrostro2781
@robertobuenrostro2781 2 года назад
It's going to run just fine. 👨🏻‍🔧
@Cartier_specialist
@Cartier_specialist 2 года назад
Congrats Jared or condolences whichever applies.
@xkavarsmith9322
@xkavarsmith9322 2 года назад
Congrats!
@RodderFiles
@RodderFiles 2 года назад
what year did anyone decide plastic radiators were a good idea lol
@jean-marcandjoshua-petsjournal
@jean-marcandjoshua-petsjournal 2 года назад
Congratulations Jared!
@steveluken3180
@steveluken3180 2 года назад
I shivered when I heard "flash the ECU." I have a little PTSD from watching the R8 saga unfold. 😆
@kylemcweeny878
@kylemcweeny878 2 года назад
Jr I love how humble you are. Like when u were moving the engine and everything back under the car you knew he wasn’t lined up. But instead of saying you gotta go this way you said I need to go this way how are you looking. It’s so subtle and most people wouldn’t have even caught that but an intelligent guy like you I know u did it on purpose and I respect that completely
@kevint8315
@kevint8315 2 года назад
Any vids coming on the car crusher? Keen to see that beast in action.
@drewping2002
@drewping2002 2 года назад
Congratulations, Jared and his bride! Best of luck in your new life together! ❤️
@gregdiiamond3899
@gregdiiamond3899 2 года назад
Your brother getting married is no excuse for lack of content Mr. Ross!LOL Congratulations to Jared! May he have many years of happiness!
@12yearssober
@12yearssober 2 года назад
Considering that the majority of marriages end in divorce I wouldn't bet on many years of happiness.
@danielversion1.035
@danielversion1.035 2 года назад
"the only thing that's unfortunate is that soooo much oil went on this one, the case may be full of oil... so i'm just not gonna look..." Sir... i like your style 🤣🤣👍👍
@erichargis3349
@erichargis3349 2 года назад
Vice grip garage style 🤣
@janineloftin2151
@janineloftin2151 2 года назад
Hi John Ross, I just finished watching this video and wanted to let you know that I saw this video in my Google feed today. Have a wonderful week. 😊 Congratulations to Jared & the Mrs! 🥂 💒 👰 💍 🤵
@pops55650
@pops55650 2 года назад
Glad to see the Corvette coming together. Can’t wait to hear it run!
@greathornedowl3644
@greathornedowl3644 2 года назад
Wow, admiring the World of Wheels classic car collection in the background - not that I was not paying attention. Tell the guy from The Government - great camera work.
@VanisleNSX
@VanisleNSX 2 года назад
Congratulations, Jared!
@jhpedras
@jhpedras 2 года назад
I agree with the part of reuse everything but a good clean up just to check the leaks in the future.
@Robsav-yx6vi
@Robsav-yx6vi 2 года назад
JR, just do want you want to do on it. Don't worry about folks' comments Keep it fun. The while your there Never Ends.. And is So expensive. Huge Fan of your Channel.
@Devastator0
@Devastator0 2 года назад
So keen to see how this car goes!! Fingers crossed for you mate!! Keep up the great work!
@robertspear9134
@robertspear9134 2 года назад
Best wishes Jared and Mrs Jared!! Anxious to hear this thing start up, great content.
@MrMattDat
@MrMattDat 2 года назад
Very cool to see the Vette going together!!
@johnhallman3896
@johnhallman3896 2 года назад
Hardest part of swapping an LS into your bargain basement Corvette? Tolerating the never-ending critiques of the peanut gallery. Keep up the interesting content WJRG.
@AutoAuctionRebuilds
@AutoAuctionRebuilds 2 года назад
I love the “while you’re in there” guys lol. While you’re swapping that LS6 you should have rebuilt it. While you have the trans out you should have rebuilt it. Heck no toss that bad boy together and rip the tires off her!!
@jonsingle1614
@jonsingle1614 2 года назад
Nothing more fun than dropping the engine to do it twice ! 😁
@carnstar
@carnstar 2 года назад
Those guys are the same guys that have a car in the garage for 6 years collecting dust running out of funds Lmaoo.. just send it
@jonsingle1614
@jonsingle1614 2 года назад
@@carnstar its only been 5 yrs 😋
@rupertsheldon7081
@rupertsheldon7081 2 года назад
The only while your in there thats a real good idea is rebuilding the torque tube. Bearings and couplers are a less than $300 bucks. Takes a couple hours.
@garysimonson9593
@garysimonson9593 2 года назад
somebody's done recent work in that engine as I recall, it shouldn't need another rebuild.
@Bicketybam68
@Bicketybam68 2 года назад
Congrats to Jared and the Mrs. Cheers from Australia.
@Wheelhouseprojects
@Wheelhouseprojects 2 года назад
It’s a special one - great color combo - no active suspension bs - now a killer drivetrain. I’m sure someone already mentioned but those body side modelings are a factory option and rarely soon on C5s (I think they look good).
@tollefreyerson6710
@tollefreyerson6710 2 года назад
Congratulations JR! So cool seeing it go back together!
@Akecherfd8424
@Akecherfd8424 2 года назад
Your brother welds the air hole shut and you got a hair cut. Looks great.
@alansmith4734
@alansmith4734 2 года назад
If you really suspect that the 'Vette's ECU is rusted into place, would spraying the back side with PB Blaster help free it?
@richardfarmer6570
@richardfarmer6570 2 года назад
Congratulation Jared. Great job JR, looking forward to first start.
@WildDigger
@WildDigger 2 года назад
Nice to see it all come together.
@bluemoth1879
@bluemoth1879 2 года назад
Blazen…:) She’s coming together. Yaaaboyyy!!
@damienreilly8061
@damienreilly8061 2 года назад
I totally agree with what u said about replacing things that don't need to be replaced but that would be freaking hilarious if the ac compressor didn't work when u got it put back together. 🤣😂
@erichargis3349
@erichargis3349 2 года назад
I'm happy to see you have such an interest or passion in corvettes. I have been a huge Corvette fan since I was toddler! Love seeing this vette content. As far as I'm concerned, it's you're shop, you're cars, and you're money. Forgot about the comment trolls and do you JR!
@anomamos9095
@anomamos9095 2 года назад
If it’s going to cost you three times in labor than the part is worth to do it later Do it now. If you can do it cheaply later then leave it be.
@kevinkyser1274
@kevinkyser1274 2 года назад
This video is awesome!…I love it when you are working on corvettes! America!
@Braditanium
@Braditanium 2 года назад
Congrats Jared! Also, whens the Darell intro?
@andrewdeming5285
@andrewdeming5285 2 года назад
For real, he seems to be a great addition to the team. Let’s build him a car.
@M_Phipps0520
@M_Phipps0520 2 года назад
Congratulations Jared
@dmann1209
@dmann1209 2 года назад
JR, that looked quite dangerous, I think I would have been more comfortable pulling down the metal rack...lol You two made it look easy. I am looking forward to hearing that beast fire up. Awesome and epic.!
@riwoof
@riwoof 2 года назад
Congrats Jared!! 🍻😁 And not to sound like a broken record, but when is the Rolls Royce going to make a cameo appearance at the shop for a little rear end work??
@jimschafer9196
@jimschafer9196 2 года назад
Great ... ready for the next reveal and that first start.
@TheBrokenLife
@TheBrokenLife 2 года назад
3:28 Wise words... I've gotten buried in the rhubarb a few times with the "while I'm here"...
@ryanputnam9462
@ryanputnam9462 2 года назад
Subframe should be about 7 ugga duggas, I checked the specs. Congrats Jared!!
@MrTimdtoolman1
@MrTimdtoolman1 2 года назад
Nice work John, she should be a ripper.
@andrewthomason3857
@andrewthomason3857 2 года назад
Was hoping Carlos Ghosn would pop out of one of the road cases for the grand finale.
@Lions7.62mm
@Lions7.62mm 2 года назад
I hope you're using Duplicolor DE1635 on that sway bar‼️ A fella heard that's the best damn paint that sticks to anything... Forever!
@TheMjphoto45
@TheMjphoto45 2 года назад
What a job. Wow
@jamesmyers3773
@jamesmyers3773 2 года назад
Love the Corvette content.
@jackoconnell5524
@jackoconnell5524 2 года назад
Congrats Jared.
@DonVDBorgh
@DonVDBorgh 2 года назад
Congratulations Jared! Also, Durel, not hold & points the camera, can "pull a wrench" as well. Great team you have surrounded yourself with JR. 👍👍
@mr_jake.y8348
@mr_jake.y8348 2 года назад
Can't wate to see that car on the road. Love your channel keep up the good work.
@darrelhandgraaf7708
@darrelhandgraaf7708 2 года назад
Good job.
@bigrockauto
@bigrockauto 2 года назад
Road Cases needed for every shop!!!
@ShadsGarage
@ShadsGarage 2 года назад
I saw you pushing the Corvette drivetrain into place with the Saturn Sky in the background. Giving me some expensive and dumb ideas...
@Grunniger61
@Grunniger61 2 года назад
NIce haircut! Continuity sucks, though :-) .
@AgtWashingtub
@AgtWashingtub 2 года назад
Congrats Jared
@nukedathlonman
@nukedathlonman 2 года назад
Almost ready for a drive. :-)
@haroldboyer1174
@haroldboyer1174 2 года назад
Awesome video on information thanks..
@BossLinco
@BossLinco 2 года назад
Listen, while the drivetrain is out you should change the left side tag light lens screws. Naw just messin. Great content, I’m learning a ton.
@jesdadotcom
@jesdadotcom 2 года назад
While you had the door open you should have replaced the steering wheel, radio, seats, and gauge cluster.
@kimosabbe50
@kimosabbe50 2 года назад
😂
@ItsaRomethingeveryday
@ItsaRomethingeveryday 2 года назад
Can't wait to see it running, Liked Vid
@MikeJohnson-ld9rn
@MikeJohnson-ld9rn 2 года назад
Hurry up J.R.! I am ready to watch you light the fuse.
@jaysonburns4423
@jaysonburns4423 2 года назад
I would love to have one of these cars ....the cars you get the nost money out of are the one that are perfectly imperfect...this car is gonna be nicer then before the old engine went to crap...
@daysleeprx512
@daysleeprx512 2 года назад
“This is one of those cars that will be around for quite awhile.” Next week: “I sold the corvette”
@williamhospodar8702
@williamhospodar8702 2 года назад
Is there any news on the '67 Camaro? I just finished watching that whole series and can't wait to see you finish the car!
@MACKDIESEL1102
@MACKDIESEL1102 2 года назад
U need to shoutout ur camera guy n brothers socials!
@davidenorth
@davidenorth 2 года назад
My Artic white 1991 Corvette sits in storage waiting for all the Minnesota snow to go away.
@clifbradley
@clifbradley 2 года назад
I take it you hired Daryl, Darrell (sp) as your new cameraman?
@jamesluke7377
@jamesluke7377 2 года назад
I'm under the understanding that EGR and other like products that delete EPA required parts are no longer available due to the EPA has deemed them illegal even though mfgs have printed all required disclaimers as "for off-road or race use only" disclaimer. I believe that questioned ruling is being fought. Don't know the status of that however. I did do a search and found some part. I think mfg of parts may have had a delay because of the EPA attack.
@baitse7676
@baitse7676 2 года назад
finally, the corvette saga continues..
@31dknight
@31dknight 2 года назад
Great video from JR.
@chrisplace3024
@chrisplace3024 2 года назад
Looking Great
@EthanDenny
@EthanDenny 2 года назад
That haircut transition though 👌
@clifbradley
@clifbradley 2 года назад
Easy breezy beautiful Covergirl, I say to my kids all the time. Along with 'Is it real, or is it Memorex?' And 'And you, music lovah, you're next!' When they blast their garbage music through all the connected speakers.
@12yearssober
@12yearssober 2 года назад
You must have been an 80's kid!!!
@scott01clay74
@scott01clay74 2 года назад
Are you interested in going to one of Cletus McFarland events like the freedom 500??
@mds2465
@mds2465 2 года назад
yep you're right! I disagree with you on your philosophy of "if it ain't broke, don't fix it!" for the simple fact that you already have the engine out of the car. Now if you have any service records or dated parts to show that stuff was replaced previously that would make sense. But if you're going this far might as well do it all in one shot! Anyways, I have enjoyed this series and look forward to seeing more videos on this and other projects very soon!
@Digital-Dan
@Digital-Dan 2 года назад
I always cry at weddings. Not Jared's, but the vette's.
@davidlilly3564
@davidlilly3564 2 года назад
Good luck jrgo.
@nachobroryan8824
@nachobroryan8824 2 года назад
Congrats on the marriage Jarod.
@fevengr9245
@fevengr9245 2 года назад
Hey neighbor, nice work! If it ain’t broke, don’t fix it (because, over the years I’ve broken a lot of stuff trying to fix things that weren’t broken). So, to sum up all the comments of the “nervous nellies”: “But what if something happens?!!”
@michaeldecker2725
@michaeldecker2725 2 года назад
It’s called “Winter” you can look up the time schedule.
@michaeldecker2725
@michaeldecker2725 2 года назад
Crispy sway bar, but, cruddy compressor.😆
@69Dartman
@69Dartman 2 года назад
It's so nice when all that stuff is just sitting there out in the open so you can easily do anything you need to. Hopefully it can stay completely together and just lift it back into place and done. I'm not fully up on how those are laid out and built. Watching now as you slide it in place 👍
@brianrussell1110
@brianrussell1110 2 года назад
Yes. Keep this car.
@Rob_Huskett
@Rob_Huskett 2 года назад
"While you're in there" has to be the most expensive statement ever in car building. Sometimes you just need to get the car running and if the engine has to come out again then so be it.
@troyblackwell3995
@troyblackwell3995 2 года назад
Excellent content with tons of useful information. By the way, have you started the car crusher that you and your Dad were working on?
@jeroldbreazeale4717
@jeroldbreazeale4717 2 года назад
Been waiting for this video 😀😄
@fredrikdanielsson3605
@fredrikdanielsson3605 2 года назад
Man I'm in a rush but really wanted to watch this video so I put on x1,25 speed. Its like watching any other youtuber on double speed. I haven't noticed it before but you talk really fast 😂😂😂
@Philc231
@Philc231 2 года назад
Amazing
@lukejansen2321
@lukejansen2321 2 года назад
Much better videos than your rental cars 🚙
@Cedrickr
@Cedrickr 2 года назад
I'm just not gonna look, because if I don't see it, it don't exist!
@elia2441
@elia2441 2 года назад
So who is this assistant Darrell 🤔, we see him around but I don't remeber you introducing him. Seems like a good friend
@wayne1141
@wayne1141 2 года назад
Hair trim looking good
@pdennis93
@pdennis93 2 года назад
Lol I noticed that too.
@duanefrancis9769
@duanefrancis9769 2 года назад
Alright, alright, alright… you wanna fix the AC? It would be a lot cooler if you did.
@handbanana6843
@handbanana6843 2 года назад
Awesome.
@johnyates5034
@johnyates5034 2 года назад
Cleetus' AC compressor is much bigger....
@elainerussell924
@elainerussell924 2 года назад
The weather O you poor boy come to Rhode Island waaa waaa
@mikehuffaker3593
@mikehuffaker3593 2 года назад
Pry bar?!? You don’t need no stinking pry bar!!!
@jethro83100
@jethro83100 2 года назад
What's the contact on the bugeye? Wife's killing me.
@theopinion9452
@theopinion9452 2 года назад
Good lord look at that throttle body.
@Fezzmo83
@Fezzmo83 2 года назад
Oddly enough I use the phrase "opps there goes the nut" just about every night.
@F06M6
@F06M6 2 года назад
Howdy JR!
@ronaldentrekin4106
@ronaldentrekin4106 2 года назад
Why no work cart instead of floor? Your back will appreciate one or two.
@spencerweigand9992
@spencerweigand9992 2 года назад
still need a 240
@markmadson3802
@markmadson3802 2 года назад
What happen to 94 z28
@ggpp
@ggpp 2 года назад
When are you going to do a video introducing your video guy?? He just kind of came out of nowhere!
@popoveli
@popoveli 2 года назад
while you were in there you should have replaced the oil drain plug
Далее
When Goalkeepers Get Bored 🤯 #3
00:27
Просмотров 3,2 млн
TRENDNI BOMBASI💣🔥 LADA
00:28
Просмотров 742 тыс.
This Oscilloscope Is Garbage (Literally)
16:59
Просмотров 7 тыс.
Many Moving Magnets Melting Metal
20:21
Просмотров 2,9 млн
Будни в автосервисе. Часть 2
0:42
За что любят «Крузак»🔥
0:45
Просмотров 499 тыс.