No video :(

STIHL MS170 180 Chainsaw Clutch Removal & Installation

Подписаться 401 тыс.

Просмотров 1,1 млн

50% 1

STIHL MS170 180 Chainsaw Clutch Removal & Installation
Watch my new HD version of this video here;
• STIHL MS170 MS180 Chai...
In this video donyboy73 shows how to remove and reinstall the clutch on your STIHL MS170 MS180
chainsaw.
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a beer!!
/ donyboy73
Piston stop tool used in video is part number 0000 893 5903
Watch my video on how to convert your ms170/180 to a side adjuster here;
• STIHL MS170 MS180 Chai...
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RU-vid and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RU-vid to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #stihl #ms170

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 197

@rodneychapman197 3 года назад

To start, I want to say this is my very first RU-vid comment ever. The reason I’m commenting is because this gentleman and scholar not only seems to be very well educated and informed on a Stihl chainsaw, but he also is a master at making an informative and easy to understand video on how repair something. I’ve actually watched several of your videos of you repairing a few different things and I just wanted to say THANK YOU SIR for taking the time to make these AWESOME videos for us to learn and maybe even make a video ourselves one day showing our skills. Again, this is my first RU-vid comment EVER!! You deserved my comment and I give you an A+ on your videos. Please keep em coming and never stop!

@ChiDraconis 3 года назад

In general there are two or three types of "you tube comments" with many are not accomplished mechanics and pose difficulties due to smooth fluid use of words and writing but for the mechanic it is how to do it · 15 Pages of "Warnings" all of which are correctly worded but not once did I ever see "clean the spark arrest" and now with great effort found that is what the problem was … I get accused of poor wording posting style so the thing here is these machines are not "Wordsmiths" they are inanimate … developing efficient machinery ability is decades of work and being naturally interested

@leafbranch1872 2 месяца назад

A skinned knuckle and some pinched skin later, I wish I'd seen this video sooner. Thanks for the share.

@peterford9369 7 лет назад

The tip about the oiler worm gear lining up with the notch is so valuable a bit o knowledge. I've watched other videos where they didn't know that,,, then had to retear down machine when no oil circulation. Good video.

@stevejohnson7354 5 лет назад

thanks for taking the time to make this video ! real informative. I have read if you run the chain saw over some clean cardboard, you should see some oil drips, which indicates the oiler is flowing free.

@trouts4444 7 лет назад

I was confused from other descriptions about clutch removed especially the vague reference to rope. Very good straight forward how_to on removing the cluch. Thanks

@roxy-tj3jo 2 года назад

Thank you once again I have been trying all day to take a part off I am glad that you showed us the trick with the rope

@williamvincent525 2 года назад

A great video, informative, easy to follow, even for non-mechanics.

@glenberg1 4 года назад

I repaired chainsaw thanks to your video i thought it was seized excellent instruction. Wally Australia

@donyboy73 12 лет назад

@Archie7878 yes a piston stop or nylon rope works for me. if the roller bearing needs to be replaced the clutch drum will be loose

@jimmyinglish2669 3 года назад

Wow! Amazing video! Thank you for slowing down and showing the details one needs to know to do it correctly. God bless you sir

@tonietoney5917 4 года назад

Thanks so much for your clarity and focus upon what's important instead of hitting us with a barrage of time-consuming chatter. You would be perfect as an instructor for students studying to do maintenance on these machines. I'm going to confess to my own stupidity and thank you for calling it to my attention. I'm pretty sure, after watching this video, that I neglected to line up the notch with the wire when I replaced my clutch drum. Duhhhhh. I'll know for sure in the morning. Just in case, I've watched your other videos on oil feed issues just in case it's something else.

@Mr1cwtch 12 лет назад

great advice dude , saving me a fortune in maintenance costs. Many thanks..

@johnclarke6647 7 лет назад

I picked up a 180 from eBay and while it oiled it did not do so to my standards, so I replaced it. When I got it out it had goober coming out the shift, so I replaced the oil line and cleaned the tank too. It is best too insert the new oil line in the tank, first. I also replaced the worm gear and cleaned up the clutch side. It worked when I got it from the seller but it left a lot to be desired. Now, it works great but I have replaced a lot of things on it and repaired other things. It is not brand new but it thinks it is.

@boboloui1 4 месяца назад

Thanks buddy. You helped me get my buddy saw running

@Mike-su8si 2 года назад

I always remember what ways the parts come off and go back on messing with small engines is like a puzzle to me

@jimkovac915 10 лет назад

I have a stihl saw that needs a clutch. Now I know how to do it. Thank you.

@matezuban970 6 лет назад

Jim Kovac st Stilovke pile

@jeffhunter3909 9 лет назад

Thanks for the quick overview. My Stihl has been sitting for years and I was a little intimidated to give it an overhaul. Cheers!

@Joewalshe38 10 лет назад

Clear and concise video. Myu MS 180 is different though. The chain is held on by two nuts.

@donyboy73 2 года назад

watch my new video on how to replace the sprocket on this saw here; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OHXD3Zfdyx4.html

@petertyson348 Год назад

When you add the rope make sure you don't push into the exit hole 👍

@bombdisposalboy 7 лет назад

really clear and easy to understand video thanks for your help!

@myttar 12 лет назад

This is exactly the same chainsaw I have, but mine is 180c. I have replaced old fuel and air filter, i have cleaned carburetor just like you said, and now it works like new one. But now the chail oiler doesn't work, so I have to fix it. Thanks a lot!

@dekonfrost7 12 лет назад

i have to say thank you ..i let the belt loose for about 5 minutes and it now has loosen up a great deal.. bu i would like you to know i am greatfull. if you ever have a roofing or building question i would be glad to oblige you monamie.. i hope i spelled it close enough.. thanks...

@donyboy73 11 лет назад

yes the band goes over the clutch drum, it is not recommended to install it without the brake handle

@donyboy73 12 лет назад

they are pretty equal in terms of quality, Stihl dealers are more prevalent here so i get to work on stihls more often

@klutchdust4346 2 года назад

I have a MS250 with an engine stop/ kickback brake . I had a lot of trouble trying to get the hub back over the clutch because the brake was engaged which makes the brake band tighter. Be sure your brake is not engaged.

@donaldasayers 2 года назад

Loving the rope trick. Not seen that berore.

@daleharsh6424 10 лет назад

Great video. Although on mine the brake plastic cover and the brake itself needed removing also.

@eugenio2345 11 лет назад

THANKS FOR THE VIDEO. IT HELP ME TO REPLACE THE CLUTH ON MY "STHIL MS310". THANK YOU.

@chriscox52282 9 лет назад

Excellent clutch removal technique. Its what i was looking for.

@RG-wy1ol 3 года назад

Thanks for making this video very HELPFUL and educational 👍🏼👍🏼

@donyboy73 12 лет назад

no problem, i'm getting my garage roof done this month

@donyboy73 12 лет назад

make sure the coil isn't rubbing on the flywheel

@sergio-1232 7 лет назад

Great video, clear concise and very helpful

@davemorrison7410 3 месяца назад

Good job Don, thanks and cheers from Bracebridge 😊

@donyboy73 3 месяца назад

Hi Dave

@micahplum 14 лет назад

donyboy73 This is a great video! Thanks so much for posting this on RU-vid. Now I'm able to replace my clutch! Again thanks so much!

@pierretessier1682 2 года назад

I Donyboy73 and thanks for your wonderfull videos!. In some video before when you reinstalled your clutch, you haved removed your pull cord system because you tell that when you reinstalled clutch, that your pull cord system will have all the tension because the motor will turn in inverse. I did not saw you removing your pull cord system in this video", Sorry for mad very bad english!

@donyboy73 2 года назад

yes you are right, it all depends on the saw i'm working on, bonne soirée

@pierretessier1682 2 года назад

@@donyboy73 Merci!

@sjuanico 6 лет назад

awesome trick with the rope in the cylinder...

@norbertpeissert9889 3 года назад

my cord got stuck ,any idea

@harjitsingh5860 7 лет назад

many thanks for your guidance all peoples

@simygibbz 11 лет назад

Awesome. great vid. Now have my oil pump working again. Thanx a million :)

@hosocat1410 2 года назад

Is there a way to inspect a clutch and tell if it's worn? My saw clutch occasionally slips when cutting tough wood, but I disassembled clutch and don't know how to tell if it's worn and needs to be replaced. It's not like my car clutch with an organic material. The clutch seems to be all metal. Maybe you could make a video on how to inspect a clutch and know if it should be replaced? Thanks for your great videos!

@firefighterretired 13 лет назад

another great video - since the Carb is such a common issue - how about a video on how to replace the carb on the 180, Thanks

@gamersanonymous4me131 2 года назад

Of course I am an idiot but my clutch didn't just come out, I used pliers and pried on it and still wouldn't come out easily, but wait for it... I had the forward bar-lever lock that locks up the chain for emergencys to stop the chain spinning, was in its locked position... turned it off and easy peasy.

@MOLRobocop 7 лет назад

Thx for the disassembly. I used an impact to remove the clutch. But I know many people don't have that.

@frankpeace4202 2 года назад

Dony. Great Video. Thank you..

@alen91071 11 лет назад

yes,one M8 bolt is needed as a puller of oiler.

@jasminroy8086 Год назад

You are the best, thank you so much.

@dekonfrost7 12 лет назад

Well what kind of roof is it? Maybe I can help you pick a better material. I'm just glad for your help. And you make good videos. You take the pain and cost out of the learning curve.

@davidmulindwa9148 2 года назад

This has helped a lot.... thank so much

@donyboy73 13 лет назад

@rookie0674 unfortunately the ms180 is only self oiling and no adjuster

@donyboy73 12 лет назад

thanks for watching!

@waldowashere 9 месяцев назад

Please note you should have the Bar Lock OFF when removing and installing the Clutch Drum.

@waldowashere 9 месяцев назад

Otherwise a GREAT Video... Thanks.

@davesmith2907 2 года назад

I had problem with my MS170 today, The clutch cover is hung tight as can be, I did get it to turn some , But I stopped short of getting it off, I wanted to check here first before going farther with it, But I see I was doing what i needed to do in order to get it off. I'll need new clutch and cover You think?? Or get it off clean it good if no damage , Put it back on if its free? Appreciate the Help & Video!!

@dannyanderson632 2 года назад

Thank you very much. Done and fixed.

@chihuahuaverde425 7 лет назад

Very thorough and nice video.

@donyboy73 11 лет назад

yes

@tomkanaly5748 2 года назад

I would agree with the comments below with one exception. I followed everything you said but now I cannot get the rope out of the spark plug hole. Do you have a video on that? Or do I now have a $200 paper weight?

@norbertpeissert9889 3 года назад

great video ,however the nylon cord got stuck inside the sparkplug hole

@pasangtamang8594 2 года назад

Thank you, so much for essential information.

@VirginiaWolf88 9 лет назад

Wow this is great. My MS251 saw smoked up and now the center shaft spins but the gear that turns the chain does not. I am trying to figure out what is wrong. At first the break was stuck but now that is clicking properly it seems. I'm hoping that it won't be too expensive of a repair at the dealer. This video gave me some hope but I'm still not positive why the chain won't turn. If you have any ideas I would be grateful to hear what you think I did to it? I won't be able to go to the dealer till Monday. Your video is great. Thank You for sharing!!!

@JasonTylerRicci 2 года назад

A clutch spring went on my Stihl 024AVS. I mighta ran the saw this way for several cuts. Upon clutch removal, I noticed the outer diameter had a slight lip. This is clearly not normal, right? I'm assuming since a spring went (1 of the 3) it put unequal pressure on the 3 shoes, causing the lip. This could cause slippage right?

@donyboy73 12 лет назад

just getting shingles installed, mine are finished, they will be fiberglass shingles, can't afford metal at this time

@danformhals5777 7 лет назад

I LOVE your videos!!! I sure could benefit from a video showing how to do all the work to replace the oil pump... Is it similar to the MS250 video?

@TheKrayusKorianis 3 года назад

It's basically the same oil pump system tbh. Except the 170 & 180 don't have an elbow connector and separate oil line like the 250. 170-180 has a removable oil tank (don't need to remove it), one oil line that acts like the elbow on the 250. Donyboy has a 170-180 oil line replacement video. I also think Donyboy has one for the 250 oil pump, so does Taryl Fixes All (he replaces the entire system). It's just a long M5 threaded screw to pull the pump.

@kazimierzzagalski8752 8 лет назад

Dobry mechanik przed jakąkolwiek naprawą zawsze wyczyści naprawiane urządzenie.

@Mike-su8si 2 года назад

That's what i like doing before taking anything apart so i can see all the stuff and so dirt don't fall down into what I'm working on i use a air compressor and cleaning rags

@isidroizazaga2786 3 года назад

Thanks you very much it’s help me a lot.

@donyboy73 14 лет назад

@micahplum ur welcome dude, tell ur friends about my channel

@realtor-kstocks1649 5 лет назад

As usual another precise great video. I however have another problem. My chainsaw is a MS 180 C, with not many hrs on it. I was looking at my chain brake bc it wasn’t working properly. Thinking it was going to be a simple fix. After closer inspection it seems it was not properly used and either left engaged or being engaged while still at a higher rpm. Either way the result is the plastic housing being damaged from the heat. After watching a few of your videos, I was finally able to get the clutch drum off and then pieces/parts of the roller bearing came apart, mostly the pins on the roller bearing. Unfortunately, the springs to the clutch were also off. I was finally able to get the chain brake off, prying it gently from the melted housing. Can the Springs be put back on the clutch assembly? I would imagine the Oiler worm gear is prob damaged. While I did purchase this saw new, I did let someone borrow it and he took it to “his guy” to replace a chain and also “tune it up”. I do not know how in depth “his guy” took apart the saw. However his tune up made it run worse, especially idling. I was able to tear down the carburetor and got it running back properly. I am also properly guilty of not keeping it as clean as I should have. Being this. What is the proper way to clean the housing & clutch assembly? I heard brake cleaner or carb cleaner. Will it hurt if it gets in/on the oiler? I was going to take some very fine sand paper & clean up/smooth out where the chain brake goes. Is this chainsaw worth fixing or should I get another and keep/sell it for parts? Can you also provide the replacement part info for the following parts & anything else you think I may need: 1. Chain Brake 2. Roller Bearing 3. Possibly Clutch 4. Possibly Oiler Worm Gear Is it ok to buy from Amazon or other 3rd party or should I get the parts directly from Stihl? I can provide any pics that may be useful as well as my email/other. Thanks in advance

@donyboy73 12 лет назад

lol, what people sell on ebay, one guy was selling regular bolts for snowblower shear pins on ebay one time

@tommyjohnson4162 5 лет назад

Thanks well done you always do a great job of explaining

@stim141 11 лет назад

Great videos - you really helped with a complete cylinder/piston rebuild. I have a question about the clutch on my MS180C - when I took everything apart I'm not sure if I have a part that should be included in the clutch assembly. Its a concave washer - not the big washer that says top. It seems to go on top of the worm drive just beneath the large washer. When I put everything together I can still attach all the parts of the clutch and clip the circlip. Allows for 0 play. Is this OK?

@stihlnz 3 года назад

Good explanation thanks

@donyboy73 14 лет назад

@skillsaw94 try taking it out by using a solid metal chisel and hammer it out

@DavidWCoulter 10 лет назад

Hi, I watched a few of your videos last night and today. Very straight forward, very well done. Silly questions, but do you rebuild the clutch or simply replace the part? thank you, dwc

@donyboy73 10 лет назад

the clutch is serviceable

@williamchase3619 7 лет назад

Have you done an engine replacement video for MS180C?

@alexuyaguary5123 2 года назад

Hi I have ms440 macnum & the chain won’t stop I clean everything and they still don’t stop which piece I have to replace it thank you

@shahrizzashah1391 3 года назад

Thanks you bro..,👍

@maxmalinao1430 10 лет назад

Thanks for your quick response...

@Archie7878 12 лет назад

Hello great video!!!! I recently purchased a 056 super and want to replace the rim sprocket, but don't want to break anything doing the job incorrectly. Do I just pull the spark plug and use either a piston stop or piece of nylon rope to keep the clutch tight and turn my clutch nut clock wise to remove it???? I am guessing it is similar to your video, but want to make sure. Also if I need to replace the roller bearing what am I looking for or listening for as I run the saw???

@MysticalWarior2 10 лет назад

Thank you. I have the same chain saw, very usefull video :)

@zates2272 3 года назад

Good info thanks

@donyboy73 14 лет назад

@Mueiwark hey, i visited the Netherlands ten years ago!

@edgarschaack3709 3 года назад

Tried to do the ms180 upgrade with the stihl bar and chain but was not able to get the parts at my stihl dealer, would you post the same upgrade using Oregon parts, thanks for your great videos.

@donyboy73 3 года назад

@@edgarschaack3709 yes you can use Oregon bar and chain, also Laser bar and chain. Stihl is having a shortage of product this year

@mikesanders4012 7 месяцев назад

Do you grease your roller bearing sleeve?

@wullierennie3190 3 года назад

Done how do you relace a clutch on a ht131 pole saw

@hughjanus4371 4 года назад

Great channel, very informative, thank's

@joshmatthew4125 4 года назад

My top was on down when I took it apart.

@fabricio558 13 лет назад

gracias con la soga en el cilindro pude sacar el embrague esa no la sabia igual no vas a entender un pomo

@donyboy73 13 лет назад

@curlsbay there's little caps on top of the torx screws that u have to remove to access them, send me ur email and i'll email u a parts list

@graggcain9496 4 года назад

can you do a clutch removal and installation on a cs 3450 echo chain saw? thanks

@dekonfrost7 12 лет назад

Try and go for an achitechtural shingle. But make sure they don't rack them. It will void the manufacturers warranty.

@fabricio558 13 лет назад

@donyboy73 yes rope in the cylinder thanks,My machine is gamma

@warddan2002 6 лет назад

Dony, can you tell me what parts washer you use or would recommend for us weekend warriors? Also, a review of it would make for a great video. Thx, keep up the great work. All your videos are very helpful. Thx, Dan.

@donyboy73 6 лет назад

the red $200 one is what I have and works great. usually available at princess auto in Canada or harbor freight

@evaristoperez4536 5 лет назад

Motosierra Bardem

@philipjose8092 6 лет назад

Excellent video.

@donyboy73 14 лет назад

@Mueiwark i saw SAIL 2000 in Amsterdam, i was there 2 weeks

@maxmalinao1430 10 лет назад

Thanks... One question, Is it critical to have that clutch drum lined up with the worm gear wire underneath the clutch in order for the oiler to perform efficiently???

@donyboy73 10 лет назад

yes

@joegore1 12 лет назад

Thanks, just what I needed.

@frank0067 11 лет назад

i took off my chain and the bar it rides on with this metal piece that looks like 3 spikes but when i put back the bar and metal spike piece,the nut cant tighten them down because the threats don't go that far now as it used to, what did i do wrong

@dekonfrost7 12 лет назад

hey donyboy, ihave a ts 400 and i rebuilt the engine the crank is a hair tight and i cant get it to start turning...because i didn't have and couldnt find the stihl assembly tool... it turns but with the new rings and the tightness of the crank i cant get it to start....