The BEST way to Laser Engrave Coasters

Подписаться 1,6 тыс.

Просмотров 13 тыс.

50% 1

Laser engraving slate coasters is a super fun project! If you're looking for a good laser engraving project for beginners, or a way to make money with your laser engraver, slate coasters are perfect for you! Slate Coasters like these are a great choice for most home design aesthetics, sure to compliment any home decor. This week I'm going to show you 4 different ways to make laser engraved slate coasters to see how you can improve your design. The better you can make them look, the more money you can make with your laser engraving side hustle. To succeed at making money with your laser engraver, you need to stand out from your competition, because custom engraved slate coasters are super simple and a project anyone can do!
Longer Ray 5 10w:
AliExpress: s.zbanx.com/r/Lntvep0z3Tpr (aff)
Longer 3D: s.zbanx.com/r/LM5pQc1I8dqy (aff)
Amazon: amzn.to/45TmWX9 (aff)
From the video:
Get your own slate coasters to engrave: amzn.to/3RsM2Ii
My Model for coaster holder: www.printables.com/model/5858...
Laser Cut Box Generator: en.makercase.com/#/
Join our Discord: / discord
My Amazon Storefront:
www.amazon.com/shop/remthomps...
Awesome filaments:
Polymaker US Store: us.polymaker.com?aff=89 (aff)
Let’s get social:
Twitter: / remthompsonrtms
Instagram: / remthompson
Editor & Videographer Beau Baker
Instagram: / ginger_snaps90
My store:
www.Rjtmfg.com
Camera Gear:
www.amazon.com/shop/remthomps...
As an Amazon Associate I earn from qualifying purchases:
Buy now on Amazon: amzn.to/3kfye5Y
#3dprinting #3dprinter #RTMS #maker
Timestamps:
Intro 0:00
Starting Point: 1:34
Test explanations: 1:52
Sanding Prep 2:50
Clear Coat 5:43
Laser Set Up: 7:05
Test Engrave 8:20
Engraving Timelapse: 9:42
Horrible Smell: 10:29
Results Guessing Game: 10:57
Results Reveal: 12:09
Experiment Explanation:12:30
IP Law: 15:11
Workflow Optimization: 16:28
Stand out from competition: 17:55
Final Thoughts: 20:33

Хобби

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@Hey_BK 2 месяца назад

Thanks so much for this video! It was simple, straight to the point, and told me everything I needed to know. I feel much more confident now. THANKS!!

@brianvandy4002 2 месяца назад

Great video. You are right you do not want to inhale stone dust. Silicosis is a bad way to die. Think black lung... As for the sanding, Use two different grit sandpaper. Do the first pass at 120 to remove the bulk of the material then use 320-400 to finish. You should also test clear coat before and after the engraving. That way you don't have to deal with the fumes if you get the same dark color if you clear coat after.. As for placement, take a piece of 2mm basswood and use your laser to cut out however many 4" squares or circles you need for your coasters. Then just glue or tape that to your base. Then you just need to drop the coaster into the shallow cutout to get proper placement.

@skrutor 6 месяцев назад

If you use a random orbital sander to sand these coasters, the vibration will mash the rubber feet underneath, and you get an uneven sanded surface because your pressure changes over the coaster. A better option is to use a belt sander upside down, and hold the coaster against it with even pressure. You can seal slate with a food safe stone countertop sealer, and the matte finish will make it easier to see the engraving. The hardest part is convincing people they want to buy a coaster for any price that makes you a profit.

@deanaduffey1260 9 месяцев назад

Ha I guessed right. I like number 4 the best. Good job on touching on the logos, I see it every where. You are very right one those lawyers. Keep the vids coming you are doing great!

@surfinghollywood 3 месяца назад

You've got a great sense of humor! Love the random outtakes.

@peipizhang0802 9 месяцев назад

It's so cool!!!! really like it~

@user-pn5zf3ii2m 7 месяцев назад

Great job, I love the spray coated only coasters the best.

@aberodriguez4149 9 месяцев назад

This was great and enjoyable to watch plus another facet of being creative. Thanks for sharing.

@sebastienbarbin2462 10 дней назад

3 for me

@kylemahurin 9 месяцев назад

great video, kinda makes me want an engraver now 😆

@DesignCutters 15 дней назад

Other than spraying the clear coat too close to the coasters, and questionable sanding technique, I thought the video/demo was good. Agree 100% with you on the intellectual property issue especially on Etsy - it's ridiculous how much illegal stuff is on there. And to those thinking if they buy SVG art of trademarked characters or logos, that it then becomes legal to make products with that artwork - NO - IT IS STILL ILLEGAL!

@anthonygreen9609 Месяц назад

Yep 4 for me too.

@YourTreasureForever 3 месяца назад

*NEW SUBSCRIBER!* What a fantastic vid, great quality information and your authenticity is very engaging! ...and yeah your logo does look cool 😎 😎

@remthompson 3 месяца назад

Welcome aboard!

@user-of8nn2kz4i 2 месяца назад

4 best

@rykus2010 4 месяца назад

Great video! But doesn't adding clear coat defeat the purpose is slate coasters? Slate absorbs the condensation, the clear coat would not allow that process to happen? Maybe I'm completely wrong.

@remthompson 4 месяца назад

If I'm being completely honest, I actually hadn't even considered this. It has been cold here, pretty uch since we made these, and condensation hasn't been much concern. I supposed I never even gave that any thought to material choice when it comes to coasters. My first inclination was just, the surface tension of the condensation would help keep it sticking to the coaster, but absorption never crossed my mind. Now I'm wondering if we shouldn't find some way to test this

@johnsathe2429 3 месяца назад

Slate does not absorb moisture. If it did, slate would not be used for roof tiles.

@jimmacnab6284 2 месяца назад

Good content, only one thing I would like to see is run times.

@remthompson 2 месяца назад

Great feedback! We have some laser projects coming up, will keep this in mind for sure

@RobSandstromDesigns 9 месяцев назад

Thank you for making the video. I didn't hear you talk about putting a sealing coat on the coaster after engraving. I have experimented with putting a sealing coat and have not found a good solution yet. Each attempt appears to decrease the contrast and the ability to see the carve after engraving is impacted significantly by the angle of looking at the coaster and the lighting conditions. Have you experimented with finding a good sealing process that doesn't impact the contrast of the carving? I would be interested in seeing that process. I made a video in the last couple week, after experimenting with reusing previously engraved coasters. Something I didn't know was possible until I saw someone else's video. I gave them credit for causing me to experiment with the process in my video. In that video I sand off the old engrave and then use black paint as a pre-coat. I was happy with the result, but as you suggest I am not sure I would take the time to sand each coaster as a regular process. But precoating with the black primer will probably continue. I think of it like the opposite of the Norton White Tile method. Thank you again for your information and keep up the journey.

@DesignCutters 15 дней назад

In my opinion, no sealing is necessary after engraving - they're stone and won't get damaged from moisture.

@Calix2026 9 месяцев назад

Sir you were very wrong about your rubber feat, also you can totally breath in the slate particles “ safely”. Awesome coasters btw

@davidjenkins1785 3 месяца назад

#4 and can I use KENTOKTOOL JL7 LASER TO ENGRAVE ON SLATE

@remthompson 2 месяца назад

You should be able to! Looks like a 10w diode laser from what I can tell, that's what we've used in all of our projects involving the laser!

@lightspeedlaserengraving6048 5 месяцев назад

@basook6116 4 месяца назад

its paint BLACK gloss??

@remthompson 4 месяца назад

Clear paint! 😄

@jeffnewcombe51 5 месяцев назад

Be much better if you had them side by side on your table with labels to be able to see then for about 5 seconds lol. Not a good way to display the finished product at all. Better luck next time.

@remthompson 5 месяцев назад

We’re still pretty new at content creation and working on learning what works and doesn’t. Definitely trying to improve with each video