Тёмный

Stranger Things Arpeggio - MOOG DFAM Patches 

Attila Hanak
Подписаться 3,2 тыс.
Просмотров 8 тыс.
50% 1

Stranger Things Arpeggio - MOOG DFAM Patches
One of my favourite opening themes of any video series is the Stranger Things opening theme by Michael Stein and Kyle Dixon. So in this video I attempt to recreate it on the DFAM. The full Stranger Things Theme is a lot more elaborate of course, so I tried to come as close as possible.
At this link below, you'll find the free download folder for the Stranger Things DFAM Remix with the sounds recorded in this session
thesixteenthbar.com/sound-packs/
♪♪♪ BUY MY ELECTRONIC MUSIC PRODUCTION MASTERCLASSES ON PML ♪♪♪
► ABLETON SESSION VIEW MASTERCLASS
www.productionmusiclive.com/c...
► HOW I BUILT MY HOME STUDIO
www.productionmusiclive.com/c...
► ABLETON PUSH 2 MASTERCLASS
www.productionmusiclive.com/c...
► ANALOG MEETS DIGITAL
www.productionmusiclive.com/c...
♪♪♪ MY PRODUCTION MUSIC LIVE FAVOURITES Courses, templates, samples ♪♪♪
(Use SIX10 Special Discount Code for 10% off)
► EVERYTHING BUNDLE
www.productionmusiclive.com/p...
► TECHNO PRODUCER BUNDLE
www.productionmusiclive.com/p...
► BEN BOHMER PRODUCTION PACK:
www.productionmusiclive.com/p...
► TIM ENGELHARDT PRODUCTION PACK:
www.productionmusiclive.com/p...
♪♪♪ SOME OF MY MUSIC ♪♪♪
► Broken Echoes EP:
www.beatport.com/release/brok...
► Moon Palace:
www.beatport.com/release/moon...
► Arora Radio:
• ARORA RADIO
► Synthesizer Live:
• SYNTHESIZER LIVE
♦♦♦ massive thank you, if you'd like to support me on Patreon ♦♦♦
/ attilahanak
☼☼☼ GEAR AND SOFTWARE ☼☼☼
SOUNDASSURED STUDIO ACOUSTIC TREATMENT
www.soundassured.com/
OSCAR The Eurorack Modular Wall (Not Affiliate Links)
☼ Endorphines: endorphin.es/
☼ TipTop Audio: tiptopaudio.com/
☼ Expert Sleepers: www.expert-sleepers.co.uk/
☼ Erica Synths: www.ericasynths.lv/
☼ MakeNoise: www.makenoisemusic.com/
☼ Intellijel: intellijel.com/
☼ Mutable Instruments: mutable-instruments.net/
☼ 4MS: 4mscompany.com/
☼ Hexinverter: www.hexinverter.net/
☼ SynthRotek: www.synthrotek.com/
☼ ModCan: www.modcan.com/
☼ Pittsburgh Modular: pittsburghmodular.com/
☼ Zvex: www.zvex.com/
☼ Strymon: www.strymon.net/
☼ Doepfer: www.doepfer.de/home.htm
☼ QU-Bit: www.qubitelectronix.com/
☼ Patching Panda: patchingpanda.com/
Pre-wired Synths:
☼ MOOG DFAM, MOOG Mother 32, MOOG Sub 37: www.moogmusic.com/
☼ Arturia MINIBRUTE: www.arturia.com/products
☼ Elektron Digitone: www.elektron.se/
☼ KORG DW-8000: www.korg.com/caen/
☼ Roland TB-03: www.roland.com/ca/
Drums:
☼ Arturia DRUMBRUTE
☼ Roland TR8S
☼ Elektron Digitakt
DAWs I use:
☼ Ableton Live 11: www.ableton.com/en/
☼ Steinberg Nuendo 11: new.steinberg.net/nuendo/
My Mixers and Audio Interfaces:
☼ RME DigiFace:
www.rme-audio.de/digiface-usb...
☼ SoundCraft Signature 22MTK:
www.soundcraft.com/en/product...
☼ Allen&Heath MixWizard WZ4 16:2:
www.allen-heath.com/ahproduct...
☼ Focusrite Scarlett 18i20
focusrite.com/en/scarlett
☼ Yamaha AG03
usa.yamaha.com/products/music...
MIDI Controllers:
☼ NI Komplete Kontrol S88 MK1
www.native-instruments.com/en...
☼ Ableton Push 2
www.ableton.com/en/push/
☼ Novation Launch Control XL and Launch Pad
novationmusic.com/en
What I use for video editing:
☼ Adobe Premiere Pro
My favourite Plugins:
☼ FabFilter
☼ U-He
☼ Sound Theory
☼ Izotope
☼ Arturia
☼ Electron Overbridge
☼ Flux
☼ Glitch Machines
☼ Native Instruments Komplete 12
☼ Plugin Alliance
☼ Sonimus
☼ Soundtoys
☼ XFer Serum and LFO Tool
Studio Monitors:
☼ Focal CMS 65
www.focal.com/en/pro-audio/mo...
☼ Adam Audio T7V and T10S Subwoofer
www.adam-audio.com/en/t-series/
☼ M-Audio BX8
☼ JBL Pro 3 MKII
☼ Subwoofer KRK 10s
☼ Calibrated by Sonarworks Reference 4.1
www.sonarworks.com/
♪♪♪ FIND ME ON SOCIAL MEDIA ♪♪♪
/ thesixteent. .
/ attila.hanak. .
/ thesixteenthbar
Cheers,
Attila
#DFAMpatches #DFAM #MoogDFAM
Moog Music Inc. Logo is a Trademark Registered to Moog Music

Видеоклипы

Опубликовано:

 

11 сен 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@AttilaHanak
@AttilaHanak 4 года назад
WANNA LEARN ABOUT CONTROLLING HARDWARE SYNTHS WITH ABLETON? www.productionmusiclive.com/collections/courses/products/analog-meets-digital?aff=18 (Use SIX10 Special Discount Code on Checkout for xtra 10% off)
@fotoniknoise
@fotoniknoise Год назад
Thank you for this, very useful! I think though the sequence would have sounded better with Cmaj7 instead of Emin7, I know they share the same notes but the order just changes the feeling of it. Good job though
@uniosg
@uniosg 5 лет назад
Cool! Thnx! ;)
@AttilaHanak
@AttilaHanak 5 лет назад
My pleasure, I'm glad you enjoyed ;) Cheers, Ttils
@AttilaHanak
@AttilaHanak 4 года назад
CHECK OUT THE PML ABLETON PUSH 2 MASTERCLASS HERE: www.productionmusiclive.com/collections/courses/products/push-2-masterclass?aff=18 (Use SIX10 Special Discount Code on Checkout for xtra 10% off)
@AttilaHanak
@AttilaHanak 5 лет назад
Check out the Tutorial Playlist for ABLETON SIMPLER right here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kdwKjpvHkJA.html
@poojar1903
@poojar1903 5 лет назад
Sounds better than the original
@AttilaHanak
@AttilaHanak 5 лет назад
Oh nice :) Not exactly a compliment you get every day :) Thank you
@beatjuiceworldwide1560
@beatjuiceworldwide1560 10 месяцев назад
Can I sync it to a bucket operator?
@johncastillo8257
@johncastillo8257 Год назад
Hello, would you be able to tell me how to synch my DFAM with an MPC Live 2?
@carycrank9453
@carycrank9453 5 лет назад
Very nice mate! I am using Markt dfam mostly for percussion. Go on!
@AttilaHanak
@AttilaHanak 5 лет назад
Hey Rick, thank you for the reply ;) Do you ever run your DFAM through external effects, or just record into Ableton and apply effects there? Cheers, Ttils
@carycrank9453
@carycrank9453 5 лет назад
Sometimes i am using external fx, but mostly i am using au Plugins like Soundtoys, Waves, UAD or NI.
@AttilaHanak
@AttilaHanak 5 лет назад
Good stuff. I used to love Soundtoys, but then it started acting up after the latest update (I use VST3 though) and the plugins would not load up whenver I restarted Ableton. I ended up deleting the entire suite... Hopefully they'll fix that crap soon, because they're good plugins.
@AttilaHanak
@AttilaHanak 5 лет назад
Good stuff. I used to love Soundtoys, but then it started acting up after the latest update (I use VST3 though) and the plugins would not load up whenver I restarted Ableton. I ended up deleting the entire suite... Hopefully they'll fix that crap soon, because they're good plugins.
@carycrank9453
@carycrank9453 5 лет назад
The Sixteenth Bar Ouh that sounds bad. Good luck!
@homeslice1479
@homeslice1479 4 года назад
Great patch! Could you tune the DFAM with an incoming CV from a sequencer or quantizer?
@AttilaHanak
@AttilaHanak 4 года назад
Hey thanks for the comment and the question! Yes of course you can. It's actually a lot easier that way, because then you can just set a "key" with the oscillator's frequency control and send the note information via a MIDI to CV setup or straight from a sequencer that has CV outs like a BeatStep Pro, or Makenoise Rene. Then even use the DFAM's frequency control for transposing, and since you'll have to disable SEQ PITCH MOD so that the internal sequencers of the DFAM don't interfere with the now externally fed note information, you can use those sequencers to modulate other parameters. I just wanted to do the patch with the DFAM only, without an external sequencer, so I went the hard way ;) This is more of a "can I do it this way?" vs. an "I have to do it this way" scenario. Cheers, Attila
@alexey2093
@alexey2093 5 лет назад
Hi! Nice video and sequence - so simple yet so powerful. Can you please check something out for me with your DFAM? Th situation is - when SEQ PITCH MOD set to ON (doesn't matter VCO1+2, or VCO2 only), and you have some random sequence programmed on pitch knobs (doesn't matter what exactly), but only one step turned on by its velocity knob (doesn't matter which one) - you start running it with short VCA decay and hear only that one step like a single "ting". But then if you start increasing VCA decay you start to hear other steps as well, even if their velocities are turned down to zero, more and more steps according to VCA decay, and then at max you hear the whole sequence - do you have the same thing? I mean, it doesn't make sense, velocity knobs are in fact becoming useless with long VCA decay - if I want to hear for example step 1 and 5 on different, then longer their decay without introducing other steps - I can't hear only 1 and 5 (only with short decay) because all other steps are becoming audible too while I'm increasing decay Just want to know if something's wrong with my DFAM or it's "okay", thank you!
@AttilaHanak
@AttilaHanak 5 лет назад
Hey Aleksey, thanks for your note, give me a bit of time and I’ll look into it closer. It sounds weird, but I’m sure there’s a reason why it’s happening; the DFAM is weird lol and adjusting one knob can have countless different effects. I’ll get back to you shortly.
@AttilaHanak
@AttilaHanak 5 лет назад
Ok, so here's what's happening: First of all this is totally normal, so don't worry, your DFAM is fine :) The 3 envelopes of the DFAM are affected by a few different sources, and not just the velocity knobs; it's a combination of the velocity knobs, the VCA EG amount, the VCA Decay amount, even the note sequence knobs have some effect. SO when your VCA Decay knob is all the way up, and you play the sequence, basically what's happening is that when the step with the velocity knob all the way turned up gets triggered, it will have a vero long decay tail, and that step's decay tail will keep playing through the rest of the sequence. Now that decaying tail as it passes the other steps in the sequence will get affected by the rest of the knobs positions every time it passes one. So it will pick up the different steps of the pitch knobs as well. This is why the DFAM is crazy and sometimes unpredictable. I hope this helps.
@AttilaHanak
@AttilaHanak 5 лет назад
Ok, so here's what's happening: First of all this is totally normal, so don't worry, your DFAM is fine :) The 3 envelopes of the DFAM are affected by a few different sources, and not just the velocity knobs; it's a combination of the velocity knobs, the VCA EG amount, the VCA Decay amount, even the note sequence knobs have some effect. SO when your VCA Decay knob is all the way up, and you play the sequence, basically what's happening is that when the step with the velocity knob all the way turned up gets triggered, it will have a vero long decay tail, and that step's decay tail will keep playing through the rest of the sequence. Now that decaying tail as it passes the other steps in the sequence will get affected by the rest of the knobs positions every time it passes one. So it will pick up the different steps of the pitch knobs as well. This is why the DFAM is crazy and sometimes unpredictable. I hope this helps.
@alexey2093
@alexey2093 5 лет назад
Ok, got it! Thank you a lot man, this was very useful to understand.
@AttilaHanak
@AttilaHanak 5 лет назад
It's my pleasure ;) Cheers, Ttils
@beatjuiceworldwide1560
@beatjuiceworldwide1560 10 месяцев назад
I can’t you just use the metronome as your Pulse
Далее
Drake - In My Feelings Tribute - MOOG DFAM Patches
9:11
How to Sync your DFAM to a DAW - MOOG DFAM Patches
12:24
Угадай МОБА 1 🥵 | WICSUR #shorts
01:00
Просмотров 389 тыс.
Moog DFAM Tips: How To Make Complex Sequences
10:56
Просмотров 28 тыс.
FSU - TipTop Audio
36:23
Просмотров 10 тыс.
Moog DFAM Tips: How To Make Kick Drums
12:44
Просмотров 15 тыс.
Hard Techno Bass Line - MOOG DFAM Patches
5:13
Просмотров 8 тыс.
Moog DFAM Tips: How To Make Hihats And Cymbals
8:38
Просмотров 3,9 тыс.
DFAM Patch - Annihilation - Heavy Industrial
4:55
Просмотров 12 тыс.
Attila Hanak - Whatever it May Be
13:54
Просмотров 542
지민 (Jimin) 'Who' Official MV
3:28
Просмотров 22 млн
Stray Kids "Chk Chk Boom" M/V
3:26
Просмотров 55 млн
Jaloliddin Ahmadaliyev - Kuydurgi (audio 2024)
3:26
Просмотров 1,6 млн
JJAM
3:06
Просмотров 2,4 млн
Tamiga & 2Bad - Tell Me | Official Video Extended
4:45