Straw Alternative for Decanting Tamiya Spray Paint 

This is a great idea! I will have to try it next time I decant some paint.

Cool tutorial video skip!

Very nice tip. Thanks for sharing.

Thanks for the tip, I usually just put the nozzle in the jar and make a mess, this looks alot better than my current method will give this a try, thanks again brother

Thanks Skip, I have sprayed paint straight into a cup before, this method is a lot cleaner, I'll try this in the future.

I've never decanted paint before. But I'll keep this in mind if I decide to give it a try. Thanks for the info.

Nice tips Skip

Thank you this helped alot

Great tip thank you. I usually avoid de-canting paint because of the mess I make but I’ll give this a shot. Papadan

Nice vid Skip!

Great tip Skip.. I just had a straw "blow out" a couple of weeks ago😁👌👍

Thx for the tip… I used the plastic droppers and cut the of the bulb off so it has a natural curve to wrap around the spray nozzle! But this way seems way better ! Thanks for sharing ~Don

Thanks for sharing

Very good tip, Skip. I've wrote those sizes down and will check out my local hardware stores👍🤩. Thanks for showing and best wishes from jolly old England 👍😎Pete 🤓

C😎😎 LLL Tip Skip 🤗🤗 Have a Blessed Wknd Ahead 👍👍, Gary.

I'll have to try this method. I usually use a large pipette with an x cut into the bulb to accommodate the spray nozzle. Downside, it's straight and not really bendy without causing a mess.

Great tip Skip. My air hose for my oxygen machine is about the same size I will have to see if it will work. Have a great weekend my friend. Terry

Very useful and handy tip bro thanks for the tip ill definitly use that in the future specially wen i buy the 2 tone color purple green can they have out or for midnight purple in general ive no way getting it unless i buy closest color they got in Tamiya spray so useful tip buddy thank you, 👍Keith

Very good tip, Skip. I have tried it once with some primer and a tube out of a old spray can while it did come out in a controllable manner I had issues spraying it in my airbrush... 😥 I let it set open for a hour and set the lid on the jar and it popped the lid off and primer was boiling out of the jar. Have not tried it anymore.. LLAP 🖖 BTW I subbed too. Stop by some time and 👋

Thank you for sharing this tip. Larry Landis

👍👍✌✌

It's cheaper and easier just to spend a couple of buck on Amazon for flex strays and cut it to size and tape it to the nozzle.......Cheap, easy, and it works.

Let me ask one question. If I wanted to completely empty my spray can, why couldn't I turn the can upside-down, depress the nozzle until the propelant is all used up, poke a hole in the top of the can. Let the can de-gas for a day, then open the can and empty out the paint.

This is an obolite idea in the UK. Plastic straws are now illegal.

I didn't see any decanting going on.😁

*👍класс и привет от тренера по футболу!-!-*