Street Legal Ford Ranger Prerunner w/ Gas Cutoff HACK! | BUILT TO DESTROY 

No worries, It’s not that serious, thank you for putting out content for us and helping when we have a questions!

no worries man! You guys are putting out awesome free content for us to enjoy. One thing that I’ve always thought would step up your guys’ production would be to film all of the talking stuff straight to the camera, and then go around and shoot all the close-ups of the parts that you’re talking about. That way you can still show whatever they’re talking about but it won’t take away from the audio quality and we don’t have to see you pushing the camera into the spots to get the shots. would come out much cleaner to just show the shots over the voice. Quick google search on A Roll/B Roll will explain this better than me. Thanks for the dope content as always, this truck is cleannnnnn

Now I want a slurpee! 5:20

It was a bit cold 🥶

@@johnmerrill332 nice truck!

Redbull is hella of a thing

Any of the 4 liter SOHC Rangers were sleepers with 70 HP more than any of the other engines , 220 HP in a 3100 pound truck is more than enough . Even with brand new good quality tires , mine breaks traction on dry pavement .

@terracrew.. you won't be disappointed! I've been tagging you for a minute. Run it dagroot!

Btf makes some really good kits.

The world needs more Xterra content

Message me on Instagram @notatrophytruck

🙏

sorry, it was cold and there wasn’t a script!

@@johnmerrill332 need a script to talk about truck and state what's on it? 😆😆. That doesn't make sense eather. Obviously just threw money at it and doesn't know what it is.. every truck I've done I know the exact parts and functions of everything.

No adapter, bell housing bolts right up. But a billet culhane one would have been nice but couldn’t find one.

Old 2.8 bellhousing from a c5 will bolt a c4 directly to a 4.0

What's a older men tundra..that's about the dumest thing I've ever heard

@@anthonyolsen9299 Older Gen.

It’s been awhile but think it was a c4 bell housing. Dana sniff built it and had the trans that would work.

Coyote 😆😆😆 . Total rookie statement

Anthony Olsen haha well, that’s if he’s sticking with all Ford. Coyotes can make some pretty serious power. Obviously for simplicity and cheapness, LS is the way to go

@@hunterjohnson4954 It's really just a size issue in these Rangers. The DOHC engines are HUGE dimensionally. Basically big-block Chevy sized. From a packaging standpoint, a pushrod motor is the way to go. Either LS or 351w if he wants to stick to Ford.

@@WhyBeNick totally agree for a ranger with a stock front end, but this thing is rocking a tube front with a ton of room

weighs 4840 with a full 40 gallon cell.

He said it was "legal looking"

not a nightmare with 5.83 gears, did 90+ top speed.

If you rolled over and started spilling fuel, that fuel could catch fire and you could burn to death before anyone would be able to get you out.

mistaken.

Keeping in mind that it's still a v6, he's probably somewhere around 60-80k deep. But it depends on a lot of things. Just a guesstimate

I would guess a little over 100k if you didn't do any of the work yourself. Literally every aspect of this ranger was done well.

What can I expect with a V8 swap?

What does it cost to maintain?

@@asmith7094 As Roberto said, every aspect was done very well. He probably did end up spending around 100k. From personal experience, you can get a full build with a v8 swap from BTF Fab for 100-150k depending on the attention to detail. As for maintenance, you still have general things that need to be checked like oil, coolant, brakes, etc.. You would have to check hubs and bearings, uniballs and heims, shock seals and safety equipment (functioning properly). I’m absolutely sure I’m missing more things but you should also check for cracks in the frame or tubing. It’s hard to put a price on replacing worn components just because it depends how hard you push the truck, how well everything was prepped and how often you go out. But just guessing, you’d probably be spending around 2-3k on heims and uniballs alone.

2wd

I guess its bad to support your local fab shop and have a guy like ohhchofab build a truck for you when you dont have time/space to build it yourself. 🤷🏻‍♂️👍

no script and it was freezing.

It’s a big deal in CA 🤷‍♂️