Stronger and Faster: V8 Solenoid Engine

Подписаться 165 тыс.

Просмотров 203 тыс.

50% 1

In the past I have made a 1 cilinder solenoid engine and a V4 solenoid engine. They turned out really cool, but today I’m going to improve on it by making a V8 solenoid engine.
To improve it I not only double the amount of solenoids I’m also going to make the crankshaft on my cnc mill and use infrared sensors for the switching of the solenoids.
Specs:
- Voltage: 12V
- Spool wire used: 0,4 mm diameter
- Estimated wire length per spool: 40 meter
- Spool resistance: 5 ohm
- Max rpm measured: 1000RPM
Want to support The Practical Engineer? Get exclusive BTS and extra content:
/ thepracticalengineer
For more projects, build plans and other stuff:
www.thepracticalengineer.com
Check out the gear I use and recommend here: kit.co/ThePracticalEngineer
Also check out my other social media:
Instagram: / thepracticalengineer
Facebook: / emielthepracticalengineer
Twitter: / prctclengineer
Pinterest: / practicalengineer

Хобби

Опубликовано:

8 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 489

@don_pavlov 4 года назад

As long as the subtitles are great I am happy in any language.

@Thepracticalengineer 4 года назад

That's great to hear! thanks!

@brianljh8982 3 года назад

Yes, as long as there is captions, im ok with it.

@MarkR-wc2el 3 года назад

Subtitles also have fails

@balbonits 2 года назад

same. as long as the subtitles can accurately convey what you want to say, I'm good with it.

@Recked4Selfmarv 4 года назад

I'm from germany and I am always amazed how much I understand when someone speaks dutch.

@klein320 4 года назад

ReckedOne Wenn du aus der Schweiz kommst verstehst du noch mehr!

@Thepracticalengineer 4 года назад

Haha cool to hear! it is the same the other way around. I lived in germany for a bit some years ago and I learned to speak it by just listening and then starting to talk the words I knew and fill it with dutch words with a german accent. People usually understood me

@unknownknife4993 4 года назад

i take classes and realized that there is to much more to learn

@johannesn.4674 4 года назад

Plattdeutsch aus dem Münsterland + etwas Logik ~ Niederländisch

@mr.redrhino4929 4 года назад

Was ist "Dutch" auf Deutsch?

@Sychius 4 года назад

While I can't understand or speak a word of Dutch, seeing you enjoy this vid so much makes it totally worth it. I say stick with Dutch. While I'm not personally a fan of reading subtitles usually, I can make an exception for your vids :P

@Thepracticalengineer 4 года назад

Thanks Sychius! That is exactly the reason for switching for me. I think the extra joy translates into the video and makes it better overall.

@WorksbySolo 4 года назад

Wonderful project! The Dutch works good. NEW T-SHIRT IDEA: “Don’t have a lathe?... Go buy one!” Love it!! :-)

@Thepracticalengineer 4 года назад

Thanks Bernie! Haha that'd be awesome on a shirt 😂

@JohnMadeit 4 года назад

That made me laugh 😆

@BearMaked 4 года назад

Haha, I was going to say something very similar, Bernie!

@SonicBoone56 Год назад

This is the coolest thing ever. Imagine if electric cars used this as a novelty engine for enthusiasts or restomodded classic cars.

@SumbAsd Год назад

Hey, what if I said im trying to make that a thing? Well, atleast the electric cars using them.

@calvinb2408 Год назад

I love when you have an idea, think it’s original, then find out it’s been done in this guys garage. Good to see it work as imagined.

@etiennedupreez8110 3 года назад

Hi, I love the videos! I am South African, and apparantly Afrkiaans and Dutch are similar, because i could understand most of the words you said!

@CardboardSliver 4 года назад

I was looking up old V8 engines when I stumbled across this. Nice work mate, that's some serious craftsmanship!

@djjoris 4 года назад

Ben naar hier gestuurd door Henk Rijckaert "De Koterij" en natuurlijk heb je een sub bij.

@reinoutghijs6469 4 года назад

Ik ook!

@Thepracticalengineer 4 года назад

Bedankt! Er komen een hoop leuke projecten aan ;)

@idevant 4 года назад

En ik kom ook van bij Henk ... Toppie

@ti83magic 4 года назад

Idem :)

@soetens1986 4 года назад

Check, via Henk....

@emi3966 4 года назад

Definitely keep spontaneity and subtitles, definitely works. Keep up the good work. Thank you.

@RegularOldDan 4 года назад

Very, very cool. Honestly, it was not only fun to see your work but also to listen and see how many words are similar to English. Keep it up!

@s4nt497 4 года назад

That sounds so cool. Amazing work dude!

@Thepracticalengineer 4 года назад

Thanks! It does sound really cool!

@ChrisTheGregory 4 года назад

If speaking Dutch is more comfortable, I say go for it! I also like having subtitles instead of a voiceover or dubbing, because hearing the words while reading the translations is a great way to start learning to understand a language.

@Thepracticalengineer 4 года назад

That is very true! As a kid I was always watching english movies with subtitles to learn to speak the language :)

@theguyofthemonth 4 года назад

This is an amazing project, nice job! 👍

@UraFlight 3 года назад

Amazing staff ! I was very glad to find your channel

@BleughBleugh 4 года назад

Do the videos in whatever language you like! I can read English and will watch regardless. Superb entertaining engineering, your enthusiasm rubs off onto others for sure!

@Thepracticalengineer 4 года назад

Thanks! that's cool to hear!

@dutcheeseblend5458 4 года назад

Gaaf! Mooi project! Je bent goed bezig, ik geniet elke keer weer van je video's 👍

@Thepracticalengineer 4 года назад

Thanks Daan! Leuk om te horen :) Deze was ook wel erg leuk om te maken.

@Ariautoace 4 года назад

Dude. No amount of words can describe how amazing this is; in any language. Just wow.

@Thepracticalengineer 4 года назад

Thanks! That's awesome to hear!

@starfunsfs7730 2 года назад

Wow beeindruckend Gut gemacht

@bramkel 4 года назад

Ik ben hier beland door De Koterij van Henk Rijckaert. En ik moet zeggen: dit is geweldig! Heel fijn om naar te kijken en zeer leerrijk! Groetjes uit het koude België

@Thepracticalengineer 4 года назад

Hey, Welkom! Leuk om te horen dat je mijn content leuk vindt en dat je hier door Henk komt!

@JohnMadeit 4 года назад

Nice work. This is absolutely amazing

@Thepracticalengineer 4 года назад

Thanks John! This is one of those projects that turned out so nice that I can just sit and watch it.

@RazzaDazza0 4 года назад

I like the idea of you switching to Dutch because it is easier for you but I would prefer if you instead spoke in Dutch and made a dutch version of your vid but in the same vid you did a voiceover in English and uploaded that instead so that way everything is still fast and you don’t have to think before you speak but English speaker fans can still understand you and listen without having to resort to subtitles, I understand that is more work for you though.

@Thepracticalengineer 4 года назад

Thanks for the suggestion. I see your point and I have been (and still am) thinking about ways to also incorporate the international public. I do indeed have limited time so right now I'm focussing on this change. When that is established I'm going to look for the other options

@dilipsolanki786 4 года назад

You don't know , how much I love this engine

@FredMcIntyre 4 года назад

Really cool Emiel, awesome work! 😃👍🏻👊🏻

@Thepracticalengineer 4 года назад

Thanks Fred! Glad you like it!

@bastiaanwesterbeek1775 4 года назад

Super vet!!! Dit inspireerd mij heel erg om zelf ook dingen te maken!😍

@Thepracticalengineer 4 года назад

Leuk om te horen! zeker doen :)

@timadamsart 4 года назад

Weer een pracht video afgeleverd Emiel! Leuk dat je ook bent overgestapt naar het Nederlands👍

@Thepracticalengineer 4 года назад

Dankje Tim! Ja, het was even wennen, maar ik ben er wel van overtuigd dat dit beter is. Het bevalt mij in elk geval erg goed!

@maxvanderhelm 2 года назад

wat een super vet project.

@alexflipper9356 4 года назад

I dont understand but I like the video

@Ahmedqamislo 4 года назад

alexflipper 935 you can use subtitles

@Thepracticalengineer 4 года назад

Glad to hear that you like it. I have added english subtitles to the video to help with that.

@alexflipper9356 4 года назад

Thanks 😂

@FrenkJanse 4 года назад

Superleuk Emiel. Hier ook een fan van Adam Savage. Erg fijn om te zien dat je ook je foutjes laat ziem. Subbed !

@Thepracticalengineer 4 года назад

Leuk om te horen Frenk! Ja foutjes maken hoort er bij :) Een goede maker is goed in problemen oplossen, niet in alles in een keer goed doen ;)

@bestbuildpc 2 года назад

Amazinggggggggg! I love it!

@thetinkerist 3 года назад

Emiel kerel, je bent een held, erg mooi werk

@Thepracticalengineer 3 года назад

Dankjewel! Leuk om te horen :)

@ThaboW11 2 года назад

Great stuff.

@Tinkerz 4 года назад

Dutch works fine especially given your explanation of why it's being done in Dutch. Thank you for the video!

@Thepracticalengineer 4 года назад

Awesome! Glad you like it

@wachindeboca149 4 года назад

Hola! No se si lo recuerdas pero hace un tiempo tenias una gran comunidad que hablaba español, soy de los pocos que siguen aqui y queria decirte que me encanta tu trabajo

@oenieke 4 года назад

Prachtig compacte werkplaats :) En boeiende content ... dubbel op ! :)

@Thepracticalengineer 4 года назад

Kijk dat is leuk om te horen! Ja de werkplaats is zeker compact. Dat is soms best een uitdaging met filmen

@oenieke 4 года назад

@@Thepracticalengineer meer doen met minder, knap

@eatenkate 4 года назад

Conclusies: 1) Je bent nóg gezelliger in het nederlands 2) Zo leer ik eindelijk ook eens wat al die dingen in het nederlands heten, ik leer alles over hout/metaal/CAM van youtube, in het engels en woon al meer dan 10 jaar in het buitenland en dan pik je niet zo makkelijke nieuwe nederlandse woorden op, dus ben superblij dat je dit doet!

@Thepracticalengineer 4 года назад

Dat is goed om te horen! Ik ben er zelf ook erg tevreden over. Ik leer zelf ook het meeste online, dus ik zal ook af en toe wel wat specifieke woorden moeten opzoeken ;)

@RickTizzy 4 года назад

your english vids are just as great! Die hebben ook mijn vookeur in alle eerlijkheid :D

@Thepracticalengineer 4 года назад

Dankje! wat maakt dat die de voorkeur hebben?

@RickTizzy 4 года назад

@@Thepracticalengineer Omdat je het vraagt dan... Nederlands is naar mijn idee over het algemeen een nuchtere en soberder taal. In het engels kom jij dan ook veel expressiever en levendiger (en daarmee toegankelijker) over is mijn mening. Als je dat zou proberen over te nemen in het nl dan zou het denk ik gemaakt over komen ipv de enthousiasme die je in het engels overbrengt. Hoe dan ook, je content is nog altijd erg vermakelijk ongeacht de taalvoering, dus doe gewoon lekker je ding en waar jij je comfortabel in voelt zeg ik. Dan hebben we er allemaal lol in :D

@ManCrafting 4 года назад

Very cool project Emiel! Enjoyed watching this in-spite of the fact I’ll likely never attempt this. Really enjoyed hanging out and chauffeuring you around in Atlanta. As for Dutch. I grew up watching Chinese martial arts films. All sub titles. I adjust relatively quickly. It might be fun to have a Brit to overdub one of the videos as a collab. 🤣

@Thepracticalengineer 4 года назад

Hey Chad! Glad you don't mind the videos being in Dutch. After being around the cool international community last week I had some doubts. But it seems to be all fine. It was nice meeting you and hanging out at WorkbenchCon!

@favouremmanuel8876 3 года назад

I'm sad you said Electronics is boring.. it's very interesting for me and an awesome course... Though trouble shooting problems can be a hassle for some people, but it's also a nice time to learn alot..

@InfernosReaper Год назад

I had this idea myself, but lacked resources. It'd nice to see it working.

@Makebuildmodify 4 года назад

Heel fijn! Hou ervan!

@Thepracticalengineer 4 года назад

Goed om te horen!

@Ernzt8 4 года назад

Ik vind het een prima keus om het in je moerstaal te doen, je geeft zelf de reden al aan waarom. Met goede ondertitels is het toegankelijk voor iedereen, een extra versie met Engelse voice over zou ook nog kunnen. En o ja, die nieuwe draaibank zet ik gewoon in de woonkamer ;)

@Thepracticalengineer 4 года назад

haha, ja de woonkamer lijkt mij een prima plek ;)

@DodgeVendetta Год назад

Tof project man, groetjes uit België. (perfect te verstaan) :b

@Thepracticalengineer Год назад

Haha, gelukkig maar!

@Rouverius 4 года назад

Supergaaf! Great job!

@Thepracticalengineer 4 года назад

Dankjewel Rouverius!

@henkrijckaert 4 года назад

YES! Een ander maker-kanaal in het Nederlands! Cool project, Emiel!

@Thepracticalengineer 4 года назад

Hey Henk! Jaaa! ik ben heel blij met de switch! Dankjewel, het was een hoop priegelwerk, maar was het zeker waard!

@kemdust 4 года назад

Henk, je weet nu wat te doen, ondertittels in het engels.😁

@owenroth5686 4 года назад

I speak English but subtitles won't stop me from enjoying these videos

@Thepracticalengineer 4 года назад

Thanks that's good to hear

@richardfox5364 3 года назад

I just found your video. IT IS AWESOME! Subscribed and liked.

@PeterLunk 3 года назад

Ontdek net pas je kanaal... En was juist blij verrast iemand te zien die in het Nederlands zijn videos maakt. Ik spreek zelf prima Engels dus wat dat betreft maakt het mij persoonlijk niet uit. Maar ik vindt het wel veel educatieve waarde hebben juist voor Nederlandse jongeren die de engelse taal niet goed machtig zijn. PL.

@Thepracticalengineer 3 года назад

Hey Peter! Sorry voor de veel te late reactie! Leuk om te horen! Ik vond het zelf inderdaad jammer dat er maar zo weinig nederlandse makers zijn vandaar dat ik de switch gemaakt heb.

@BearMaked 4 года назад

I don't mind the subtitles. And I have no idea how any of this project works (no engineering experience at all for me), but it was fun to watch you build it!

@Thepracticalengineer 4 года назад

Hey, That's great to hear. i'm glad you enjoyed it

@capitalz6566 3 года назад

Echt een dikke werktplaats man 👌👌👌

@Thepracticalengineer 3 года назад

Dankje! Ik ben er ook heel blij

@eexmann 4 года назад

Heel fijn dat ik je gesproken woord helemaal kan volgen, sommige Engelse termen staan niet in mijn persoonlijke woordenboek, dus bedankt.

@Thepracticalengineer 4 года назад

Graag gedaan! Ja zeker de technische termen kunnen wat verwarrend zijn. Het bevalt mij prima in het Nederlands :)

@embain269 4 года назад

I'll keep watching either way, your projects speak for themselves, one small request, dont talk so fast if your gonna switch I can't read that fast, lol

@Thepracticalengineer 4 года назад

Thanks! that is nice to hear! I'll do my best to slow it down.

@xavimourelo 4 года назад

Don't worry about switching languages if you are more comfortable, I don't know dutch but I enjoyed the video, so if you did too while making it that's even better :)

@mandog2142 4 года назад

Zeer innovatief! En cool.

@Thepracticalengineer 4 года назад

Dankjewel! Ik ben er ook heel blij mee hoe hij is geworden. Het is een mooie eyecatcher

@firdauszainudin7118 2 года назад

JerryRigEverything Dutch style. Love your content, man.

@luchoportuano3272 4 года назад

Im from México and I like your videos, it does t matter the language

@Thepracticalengineer 4 года назад

Thanks thats great to hear!

@MrZeroinside 4 года назад

Nice work jerry

@ddpgokchinees839 4 года назад

Nederlandstalige maker video's zijn altijd een aanrader

@Thepracticalengineer 4 года назад

Goed om te horen! Ik hoop wat bij te kunnen dragen daaraan

@ddpgokchinees839 4 года назад

@@Thepracticalengineer Dat is je bij deze alvast gelukt. Bedankt

@nailsaggitarius4212 3 года назад

Very good! two questions: 1) How to make solenoid stronger 2) how make solenoid moving in steps

@artuur1820 4 года назад

Nice man!! Groetjes een belgische kijker!!

@Thepracticalengineer 4 года назад

Hey Welkom!

@user-vr8xv5jz7r 4 года назад

Je Nederlands is helemaal top

@louloutb56 4 года назад

Bravo superbe travail .

@Thepracticalengineer 4 года назад

Thanks Jean Louis!

@CrazySD1993 4 года назад

"For this kind of work a lathe is very easy. If you don't have a lathe and you still want to do this project... Just buy one." XD

@Thepracticalengineer 4 года назад

Life advise 😂

@mel_163 2 года назад

mate this is a wonderful project, i am so curious about these engines i want so much to build one of these and test it, maybe even trying it on a rc airplane

@pieterbonten7301 4 года назад

Henk crew, ook echt een super nice video

@Thepracticalengineer 4 года назад

Hey! Wat gaaf dat je via Henk bij mij terecht gekomen bent!

@vadim9342 Год назад

Now let's make them full sized and hopefully Ford, Chevy and Dodge can keep the V8 alive in some way :)

@afiqkarnain 3 года назад

man, you really made it, v8

@crashweasel 4 года назад

Much love of a ' de koterij' viewer :)

@Thepracticalengineer 4 года назад

Hey thanks! welcome to the channel.

@o.schavemaker5615 3 года назад

Geweldig! Heb je ook de plannen/bestanden om het zelf te kunnen maken?

@thewizard1196 3 года назад

This in my 1/14 scale rc semi 👌🏾

@kiraditt523 4 года назад

I love that your doing videos in Dutch since I'm trying to learn it slowly and I can somewhat understand it cause German. And subtitles are fine for the rest. However maybe put the subtitles In the video directly since how RU-vid does It, it Sometimes covers important parts. And it would be really great if the timing and splitting were a bit better since it's really hard to follow like this at the moment. I don't know how your currently making the subtitles but if you're in need of a good program Aegisub is really good. I can't see if you have it enabled or not but I think there is an option for the community to create subtitles in RU-vid.

@Thepracticalengineer 4 года назад

Thanks for the elaborate answer! I'm working on improving my subtitles. I did them myself this time and it can be quite the challenge to get all the timings right. They will improve in the future.

@svenmagnusflubiproducties 4 года назад

veel succes met het Nederlands!!

@Thepracticalengineer 4 года назад

Dankje! Gaat best oké toch?

@WillaLamour 4 года назад

Awesome!!!!!

@Thepracticalengineer 4 года назад

Thanks!

@DennisRayWingo 4 года назад

Very interesting! Question. Did you do any diagnostics on this to see what the current draw is on average for the system?

@Thepracticalengineer 4 года назад

Hey, Thanks! each solenoid pulls about two amps or a bit more. there are always two solenoids engaged at the same time, and sometimes 4 so it draws between 5 and 10 amps

@SwiftsReborn 3 года назад

The subtitles are great, had no issues. id say speak a language you're most comfortable with

@lukewakeling 4 года назад

This is awesome, keep doing them in Dutch! One question; how many hours did this take to make?

@Thepracticalengineer 4 года назад

The actual build was two or three days. Not counting the fact that I had to redo all the spools

@Rafael-ko1cb Год назад

The only problem I had was that the subtitles were really, really off in terms of synchronization. Apart from that, you may speak in the language you want, because your content is super cool.

@Thepracticalengineer Год назад

Whoops, this was the first one where I wrote the subtitles. They are a lot better now someone else makes them.

@dorenzahid5244 4 года назад

This guy is like the solo hacksmith

@jordistoop3682 4 года назад

Wel beter in het Nederlands! Hoewel Nederlanders bijna alle talen in de wereld leren is je moedertaal toch het makkelijkste om te spreken, klinkt veel als jezelf

@Thepracticalengineer 4 года назад

Goed om te horen Jordi! Het is zo veel leuker om het in mijn 'eigen' taal te doen :)

@Josh_Luijsterburg 4 года назад

Inderdaad Emiel, je bent nog enthousiaster en spontaner. Houwen zo 👍 wat een gaaf project. En was ‘M’ blij met haar ‘M’? 😉

@Thepracticalengineer 4 года назад

Haha het was vooral een testje, maar Mandy was er erg blij mee :)

@Nix_sound 4 года назад

Cool video. Dutch is no problem if we have subs, I'd rather have more content, so I'm happy to watch

@EPJXM Год назад

what kind of part are you using to control the motors? (the mosfet part)

@safetyinstructor 4 года назад

I don't mind you switching to Dutch since I as a German can still understand it. Keep up this great content! 👍

@Thepracticalengineer 4 года назад

Haha, It works the same the other way around! Being Dutch I can follow most German conversations

@akal1k0 3 года назад

Do you have a way of measuring how much torque its producing? If you added a drivetrain and wheels, could it move? Looks awesome btw!

@MrCrankyface 4 года назад

Great project! I can really relate to the spontaneous thing with the languages. I also feel like I get constrained or "stiffened up" when talking in English. I find it a bit harder to follow along when I have to constantly read subtitles though.

@Thepracticalengineer 4 года назад

Thanks for your feedback. I think a non native language will always have a bit of a barrier compared to native.. What would make it easier to follow it for you?

@leshyborovoi 4 года назад

The time for the subtitles are to short. There is not enough time to see the actual process.

@WJCTechyman Год назад

I got the gist with just watching your video as I could figure it out. That said, I'm not experienced in Germanic languages besides English as most of my experience living in Ontario, Canada so we are more exposed to the Romance languages (particularly French and Spanish). Ironically, I'm 3/4 German heritage, since three of my grand parents were of German heritage by their family or maiden names. I digress, I felt a bit of pain watching your endmill bit snap and thinking of times where I've had that happen with drill bits boring into metal. I've always liked the sound of these engines as they kinda have that Diesel or fast rotating steam engine sound.

@brianbudd8487 3 года назад

How hard would it be to scale up and use mass produced parts like the connecting rods for a weedwacker or model aircraft engine parts?

@victormanuelhernandez457 4 года назад

12:01 Nice job. your face of satisfaction and happiness haha greetings

@cogitoergosum3138 Год назад

COOL!😎

@ada_unknown_2738 2 года назад

When you came for the electrical and electronics part and he says that's the "boring" part... *cries in sadness and understanding*

@user-fi1xu1pp7p 3 года назад

Make this engine bigger for like any kind of electric car and then that will be the day I own one.

@chrisbenson3374 3 года назад

I want this to be the future of cars. Electric piston engines and retro styling like Lada Niva Uuaz or Mercedes G wagon maybe even the retro Dodge Challenger. Nobody likes new cars they look like big blobs of plastic. And I cannot understand why they have so much plastic in them if they catch on fire they could easily burn someone alive.

@JF_Projects 4 года назад

Gaaf hoor, maar hoe kan je de rotatie snelheid veranderen ?

@seunghoonkang5613 3 года назад

Your video is touching. What kind of product did the infrared sensor use? Recommend the link.

@pandab34rYT 4 года назад

Cool video! It's just as easy for me, someone that doesn't speak Dutch, to watch with subtitles. So many of the words are so close to English anyway and just pronounced a little different :)

@Thepracticalengineer 4 года назад

Thanks! Glad to hear that :)

@mienmoeke 4 года назад

Nederlands komt bij mij natuurlijker en prettiger over. Eventueel een voice-over in een 2e filmpje voor de Engels sprekende medemens zou een idee kunnen zijn.

@Thepracticalengineer 4 года назад

Goed om te horen. Bedankt voor de tip. Dat is nog wel een idee inderdaad.

@c.a.g.1977 Год назад

Oeh, deze is ook gaaf Emiel! Kwam hier via het filmpje van je stoom-motortje dat je vandaag hebt gereleased. Dat roffeltje klinkt fijn zeg, het is bijna een benzine V8 😄 Heb ook wat van je Engels gesproken videos gezien, ik snap je keuze en je reden, maar wou je toch even meegeven dat je Engels echt meer dan prima is hoor! (BTW: Laura Kampf maakt haar videos ook in het Engels en gooit er af en toe iets van haar moederstaal doorheen, daar zet ze gewoon subtitles onder. Dat zou jij ook kunnen doen.) Met Engels bereik je toch misschien een groter publiek.

@Thepracticalengineer Год назад

Thanks! Nederlands is ook wel een stuk fijner om te doen, al heb ik ook wel door dat dat minder kijkers trekt.

@estebanprieto6574 4 года назад

Hi, how are you i hope you're fine. I would like to know if this kind of engine is more and ic engine or a electric engine as his power efficincy by constances at rhe rpm, also by all his moving parts and also if it can mount gearbox or its unnecesary