Тёмный

Strongest & Lightest Jonboat Framing "1448 Weldbilt" 

TRICKED TINS
Подписаться 16 тыс.
Просмотров 9 тыс.
50% 1

I love building the weldbilts. The transition from the Stratos to this is night and day. I bet I climbed in and out of that Stratos 1000 times. My favorite part about building a 48-wide Is that I can reach across to the other side without getting in the boat. This makes a huge difference on the wear and tear on my legs. Especially considering that 90% of these videos are filmed after I work a full 8-hour day. I think it's safe to say this will be my best 14 foot boat build yet. I'm going to leave an itemized list of all the prices for the material I'm using in each video. Since the hatches and live well were not completed yet I will add them later. So far the only material I have used is in the front deck frame. I'll leave the list below. 👇
3" x 1" x 1/16" tube 7' @$3.00 =$21.00
2" x 1" x 1/16" tube 6' @$2.50 =$17.50
1.5 "x1.5"x1/8"angle 10'@$3.50=$35.00
That's a grand total of $73.50 for the front deck framing. This frame is super lightweight coming in at only 6.5 pounds! Once the hatches, deck sheets, and vertical supports are installed, this front deck will easily be able to hold over a 1000 pounds! Basically your boat would sink before your front deck failed! Episode 3 will have a lot more information because it will show majority, if not all of the metal work that goes into this boat. I appreciate you guys watching and hope that you would subscribe to the channel. This video is basically 2 videos I combined into one. I could not find a good way to split it up and really just wanted to drop it as it was. I would really love to hit 10k subscribers by the end of the year! Help a brotha out!!! I gotta get back to work!
Follow Tricked Tins on my other social media accounts for giveaways and special offers👇
bit.ly/TRICKEDTINSFACEBOOK
bit.ly/TrickedTinsJonboats
www.TrickedTinsJonboats.com
Follow my Videographer👇
/ ricomarcelophotography
/ ricomarcelophotography
/ _rico_marcelo
Follow SBFISHINGTV👇
bit.ly/sbfishingtv
My brothers company check him out👇
bremmystrong?ig...
bremmyproducts.com/2Y=
bremmyproducts.com/

Хобби

Опубликовано:

 

2 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 82   
@Ohsnaapp
@Ohsnaapp Год назад
Without music!! Love the raw cut
@TRICKEDTINS
@TRICKEDTINS Год назад
Noted
@sharonbraselton3135
@sharonbraselton3135 3 месяца назад
Nice john boat
@TRICKEDTINS
@TRICKEDTINS 3 месяца назад
Thanks it turned out Amazing
@dfox7777
@dfox7777 Год назад
So much room for activities! 🤣
@batfreak6897
@batfreak6897 10 месяцев назад
I like music and non music. Hearing the tools work is great as a reminder of the process but not necessary IMO for the entire vid. Love watching!
@TRICKEDTINS
@TRICKEDTINS 10 месяцев назад
Thank you I really appreciate it
@b4billions_
@b4billions_ Год назад
With music without music all GOLD! Combo of music and machinery is a nice touch IMO. Also, I like the long videos very informative.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha! Feedback noted
@miltonbrown7275
@miltonbrown7275 Год назад
It's looking sick bro... now let's get back to work 💪🏽
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@maddgoatee9708
@maddgoatee9708 Год назад
This 40 minute video felt like 15 minutes. So much great info and inspiration to build our own. Music or machinery? I don't mind either way as long as the machine is not super noisy. Congrats on 7K+ subs.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha
@therealsm211
@therealsm211 Год назад
The music helps with the flow of the vid. Nice work as always bro!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@chrism4715
@chrism4715 Год назад
Videos are perfect thanks for sharing
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@carlosleila2799
@carlosleila2799 Год назад
Keep doing what you do bro! Youre killing it #1 jon boat builder on yt in my opinion!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thx brotha!
@MichaelPHarrold
@MichaelPHarrold Год назад
Love it....get back to work. haha.
@RA-zl6iw
@RA-zl6iw Год назад
Nice work!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@KWMachemer
@KWMachemer Год назад
I don’t mind the music or no music, either way works. Also, longer videos are great because we get more content! Keep it up brother!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks for the feedback
@No_social
@No_social Год назад
No need to mention the other ppl building tin boats on YT. Your work speaks for itself.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@cab8188
@cab8188 Год назад
don't need the music ,Your skills and commentary are all we need. Just saw the video of the food truck build could we see more of your daily jobs? that would be great. Thanks !
@TRICKEDTINS
@TRICKEDTINS Год назад
I appreciate the feedback! I'll see what I can do. It's tuff to make videos of normal work stuff, but trust me it makes the boats look like a walk in the park! The amount of custom fabrication and tolerances that go into the products we put out are unimaginable!
@stompylee
@stompylee Год назад
Keep the music and add the background sounds if you want to. Thanks for keeping me company while I build out my boat. Let’s get back to work.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks for the feedback. Lmk if you need anything for your build.
@garyhawkins9440
@garyhawkins9440 Год назад
Hey dude, do your self and the rest of us a favor! Don’t apologize for anything! You are a professional a work who is willing to share his talents. I’ve seen most off your video’s and can’t wait for the next. I’m building a 15 -48 Jon boat and will be hitting you up on for some lids and a live well. Keep on keeping on!! Thanks.
@TRICKEDTINS
@TRICKEDTINS Год назад
Appreciate that brotha! Planning on wraping up Episode 3 this weekend!
@sharonbraselton3135
@sharonbraselton3135 3 месяца назад
Biy a tent. Maket a cabin crusrr John boat
@christinerogers5331
@christinerogers5331 Год назад
Awesome build! I like a mix of music and machinery; it seems to flow with your work!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thank you. Appreciate the feedback.
@TheCrash1987
@TheCrash1987 Год назад
Another BANGER build man, can’t wait to see it finished!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha! Wont be long!
@jonboy_tv4927
@jonboy_tv4927 Год назад
I like the mix up between Timelapse/music and actually showing you use the welder and explaining what you are doing. Not gonna lie. Skipped through some of the bending process lol.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks for the feedback
@TheCrash1987
@TheCrash1987 Год назад
Also, I understand about the military. I was active from 2014-2018, out for 4 and going back in
@texasplumr
@texasplumr Год назад
The music is cool. Don't worry about all of the talking because it saves you the trouble of having to explain things over and over again here in the comment section. Nice work!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha appreciate the feedback!
@powersaustin63
@powersaustin63 Год назад
Great video Matt! Keep the music. Thanks
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@jameskinniry8931
@jameskinniry8931 Год назад
Love the detail video. Who cares how long. Packed with great info!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@ronnycortez1608
@ronnycortez1608 Год назад
Nice job bro
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha!
@rodconner9079
@rodconner9079 Год назад
Seems the length not so big deal --- it went by fast ....... and oh my what info it carries!!! As for music vs noise ... no matter here; the noise is the way it is, so I'm all for it. Quality isn't time-saving that's for sure - otherwise it wouldn't be question. Love it! Be Safe
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks for the feedback!
@carpturnalnailer
@carpturnalnailer Год назад
Dude I'm jelly I want to make my videos so much better. You're kicking ass man! Great work!
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha! "Get back to work"
@brandywineangler6748
@brandywineangler6748 Год назад
No concern at all here about the video length. Never drags. All super interesting. I love the music in your videos. The quiet segment is a cool change up but it works best in a small segment and as a contrast to the music backed segments.
@TRICKEDTINS
@TRICKEDTINS Год назад
Appreciate the feedback
@TinyBoat
@TinyBoat Год назад
Thanks again for this awesome video bro! I love the music and machinery sound in the background. Do not change this - please! Have fun at your first tournament with SBfishing. We are watching you
@TRICKEDTINS
@TRICKEDTINS Год назад
Ill update as I go in the description. These videos are only 2-3 days behind where Im at with it In live time.
@dakotaon4wheels489
@dakotaon4wheels489 Год назад
TBN wish they could do boats like this, you’ll see them try to pop out with a spool gun trying to compete here soon lol
@TRICKEDTINS
@TRICKEDTINS Год назад
🤣🤣🤦‍♂️
@TKOSNGR
@TKOSNGR Год назад
Build is looking sick. I like where you stopped the front deck extension. People tend to go a little crazy with their front deck lengths IMO. In a 14fter, floor space is limited and if there's ever more than 1 person in the boat that lower floor space is valuable. Allows you to move around safer and easier. As for the music, I don't mind it for time lapse scenes but when you're talking it's not necessary. It can be a distraction. Just my opinion though. I definitely prefer music over the sound of a welder though 😁. That's the sound of money for you though I'm sure.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thanks brotha. I figured that extra floor space in front of the deck would fit a big cooler, or back seat boater tackle box, and not interfere with leg room while using the outboard.
@TheCrash1987
@TheCrash1987 Год назад
😂@ the message at 32:35, I WOULD NOT doubt that. I had a falling out with that group due to some really stupid crap so I wouldn’t put it past them.
@TRICKEDTINS
@TRICKEDTINS Год назад
That whole group is a joke. Story for another day... lol
@TheCrash1987
@TheCrash1987 Год назад
@@TRICKEDTINS brother I couldn’t agree with you more! I was directly involved with them and the Texas chapter before a big falling out and childish fight between them and the original group(and personal issues with the Texas chapters leader). That’s when I cut bait and got out! I’d much rather support dudes like you doing these kind of builds!
@jonboy_tv4927
@jonboy_tv4927 Год назад
7.05k subscribers. Let’s go. You gotta do a live or some kind of small giveaway at 10k. I’m ramped up for you man.
@TRICKEDTINS
@TRICKEDTINS Год назад
Thats the plan. I do a bunch of live videos, and giveaways in my Facebook group, but Im going to giveaway something real nice for 10k yt subs!
@jonboy_tv4927
@jonboy_tv4927 Год назад
@@TRICKEDTINS I’ll follow your FB also
@Therapy-n-Session
@Therapy-n-Session Год назад
💪🏾💪🏾💪🏾
@cameronbragg3612
@cameronbragg3612 Год назад
I'm almost done building my boat but i need some dry tracks and lids how do I order them through you ?
@TRICKEDTINS
@TRICKEDTINS Год назад
Email me through my website. TrickedTinsJonboats.com
@duraluminum
@duraluminum Год назад
Where can I buy the dry track material from you?
@TRICKEDTINS
@TRICKEDTINS Год назад
TrickedTinsJonboats.com
@TRICKEDTINS
@TRICKEDTINS Год назад
Professionalwelding@gmail.com
@IATG-tl3jf
@IATG-tl3jf Год назад
I like music, but only if it’s low volume
@TRICKEDTINS
@TRICKEDTINS Год назад
Feedback noted! Thanks
@thomasneal7126
@thomasneal7126 11 месяцев назад
no music
@TRICKEDTINS
@TRICKEDTINS 11 месяцев назад
Noted
@billypowell7306
@billypowell7306 12 дней назад
Music
@TRICKEDTINS
@TRICKEDTINS 8 дней назад
Thanks for sharing
@pain_weaver
@pain_weaver 9 месяцев назад
Wow. TBN looks like 3rd grade stick figures compared to your work. They seem to copy others. Kinda hard to say custom when its someone elses design.
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
It's happened multiple times... You are welcome to copy any of my ideas. It's different if you copy me and then claim I stole your ideas, lol. The timeline doesn't lie.
@pain_weaver
@pain_weaver 9 месяцев назад
@@TRICKEDTINS I always had a feeling about those guys. They use so many rivets they could build the titanic. I just found your channel and my goodness your work is truly an art form. Looking forward to seeing new builds with your talent 😀
@TRICKEDTINS
@TRICKEDTINS 9 месяцев назад
Thanks brotha. Got some big stuff coming up, but Ive been grinding 150plus videos in a year and a half. Lots of good content!
Далее
Billy's "Bad Ass" Boat Build pt 3
32:21
Просмотров 6 тыс.
The end of an era. | Greg from HTD
10:26
Просмотров 9 тыс.
Jet boat deep dive
28:31
Просмотров 13 тыс.
Major Modifications, "tiny" Boat!
35:32
Просмотров 7 тыс.
14' Jonboat Full Build #trickedtinscrew
22:23
Просмотров 10 тыс.
"Perfect Jonboat Layout"
33:28
Просмотров 4,7 тыс.
Polarkraft 1448 5hr build!
10:46
Просмотров 3,5 тыс.
1448 Weldbilt Full Build! pt 1 #jonboattobassboat
27:28
2 мая 2024 г.
0:17
Просмотров 12 млн
@ms.criss_ 😂
0:21
Просмотров 2,2 млн