Hitachi Forester Zaxis 200 and Drilling Rig Sany SR150C Helping Out Stuck Concrete Mixer Truck WARNING!!! NO TV BROADCAST WITHOUT PERMISSION!!! NO RE-UPLOAD!!! MrZygy3
I'M an excavator driver and from my experience i always pull the trucks from the front. There is a bar on a bumper of the truck where you put the chains and an eye between the quick hitch and the bucket on the excavator. Pull it, job done.
What do expect? The contractors want the very heavy concrete truck to go down a slicker than greased snot ramp into a muddy hole. They should of used and paid for a pump truck.
I like your wise comment, everyone think this is stupid, because they just watching and commenting, not doing it. Each location have their own rules and way. Thank you for watching.
I would say, he is instead of dull, however, more courageously. I, unfortunately, with something so always with and hope which well goes out it :) Treasures sometimes, so this also sees you, or?
Just remember your GOAL! Get Out And Look! You will know if the condition of the surface will sink your your axles but unfortunately most of us drivers in the ready mix industry will not learn how seriously GOAL benefits us till something like this happens. It's how we learn. And never, and I mean ever, let these customers run your truck out of personal safety protocol. Most never even sat in a mixer, all they care about is getting their mud in any way shape or form that saves them money and they will walk you right into a ditch if you let them. That's it out of me brothers in the business, STAY SAFE!
Oh well that's good news for him then there was this one time back in 2005 when I was at The beach and they were putting some new condos in across the street from mine and they had a cement truck a really nice one and it managed to get stuck on Monday in the concrete got set inside the drum I didn't see it for the rest of that week
Oh man I bet that wasn't too fun getting that stuff out The one that I saw at the beach I think the problem with that was the workers were taking too long to get the concrete footings set up for the foundation for the condos so by the time 530 rolled around and only got maybe A quarter of it unloaded after refilling at the plant The drum stopped when it was backing out and getting ready to leave and I figured they would probably be working at that one all night because it was one of those big quad axles but as it turned out I didn't see it for the rest of the week
godzillasdad From the beginning until finishing rescue this truck, and i've checking it all, there is no damage. We just lost our working time. Thank you for watching...
I have been driving a mixer for over 25 years and I've been in some pretty bad situations, But the driver is just in neglect as the contractor if I seen a grease pit like that BYE !!!!!! Get out walk it if you sink there problem solved.
This driver got the truck stuck, and made the situation much worse by spinning the tires instead of getting out of the cab to look the situation over. was there any type of wood or rock that could have been put under the tires to get it up out of the ruts? the truck might have been backed onto firm material of some type
You should never push a truck out of a hole like that it will damage the drum or the back of the truck !always pull myself I would have not gone down in there until I knew something could pull me out ? !n fact most company's in England will sack a driver for allowing that
Dave Jarvis Should have pushed, even better, should have pull from the front with the chains locked from the bumper bar of the lorry and the eye between the quick hitch and the bucket, better taking off that bucket, just extra weight you won't need.
There was no improved surface on which the truck could come to rest upon. I would not have backed down there without a suitable amount of material to ensure adequate traction for the drivers when I needed to get out. Or a big piece of heavy equipment with a tow cable to follow me down. I'm sure you know how I learned these lessons. Such fond memories.not
+smallpox virus --- yea I would have walked it, and made sure I wasn't going to go all the way down there for a 1/2 yard, and have to lug a 3/4 full truck up the muddy hill.
instead of using that usd 20 k budget for site improvement stated in the prelim cost, they use them for buying beer bintang. bad understanding of site management...
if the driver had any sense he would never have reversed it onto such soft ground. it always makes me laugh when a 10 stone bloke jumps on the ground and says yeah that's stable now bring your 36 ton wagon down. its the drivers wagon poor choice poor driver
Waaah parah niiih kontraktornya...... Masa pekerjanya nga pakai helmet.... Payah.... malu daaaah niih video di lihat orang luar. No.....safety first !!!!!
MrZygy3 My mistake.. when i click on it here it says Watch this video on you tube playback on other websites has been disabled by the video owner. // My mistake i thought you removed it.
Blahhhhhhhh haaaaaa, thank u for the laugh of the day. This video is so embarrassing its not even funny!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Meanwhile the guy on deck that actually keeps his truck in decent shape that doesn't take irresponsible risks on jobsites and doesn't allow people to beat it to shit with construction equipment is preparing himself for an idiotic contractor to start screaming at him when he tells him "no."
